Minty's new camera setup, thought i would share
Thread Starter
Member
Joined: Mar 2001
Posts: 1,303
Likes: 0
From: Orange, Ca, USA
Minty's new camera setup, thought i would share
The 2 spy cameras are setup to a vcr in the car. The camcorder is jsut a camcorder
Clips coming soon with in the next 2-3 weeks....
Expect a So Cal Canyon Run Vid
https://honda-tech.com/zerothread?id=244003
Joined: Mar 2002
Posts: 331
Likes: 0
From: If ignorance is bliss... I am in the happiest, place on earth.
Re: Minty's new camera setup, thought i would share ( Rob)
what happens when a pebble hits this at 90mph?
later
matt
Trending Topics
Honda-Tech Member
Joined: May 2002
Posts: 11,209
Likes: 2
From: Tampa, FL
Re: Minty's new camera setup, thought i would share (98TypeR)
you should put some kinda lexan infront of that front camera or you will get rocks and bugs
Thread Starter
Member
Joined: Mar 2001
Posts: 1,303
Likes: 0
From: Orange, Ca, USA
Re: Minty's new camera setup, thought i would share ( Rob)
what happens when a pebble hits this at 90mph?
Waiting for my GF to return my power inverter so i can power these bad boys and make some vids
Reguarding vibrating. I had a previous setup very similar to this and it didnt vibrate, but the camera was the size of a dime.....
I need to desgin somethign that will keep the front camera from moving...
Teh rear is super stable
Thread Starter
Member
Joined: Mar 2001
Posts: 1,303
Likes: 0
From: Orange, Ca, USA
Re: Minty's new camera setup, thought i would share (MintyDip)
oh btw, No drilling was involved
Everything was done using holes that were already there
The rear was screwed into the spoilers brake light screws
Everything was done using holes that were already there
The rear was screwed into the spoilers brake light screws
Member
Joined: Jul 2001
Posts: 5,980
Likes: 0
From: Charlotte, NC, USA
Re: Minty's new camera setup, thought i would share (MintyDip)
I need to desgin somethign that will keep the front camera from moving...
Honda-Tech Member
Joined: Mar 2000
Posts: 6,929
Likes: 2
From: Kelowna Canada
Re: Minty's new camera setup, thought i would share (MintyDip)
What are you doing for audio?? I was running a lipstick cam externally to my Sony Mini-DV cam - but the audio didn't work.
Do tell......
Do tell......
Thread Starter
Member
Joined: Mar 2001
Posts: 1,303
Likes: 0
From: Orange, Ca, USA
Re: Minty's new camera setup, thought i would share (Jimmy L)
How do you handle the feed from mutiple cameras, can you record both at once or do you have to switch between them?
unless i get 2 vcrs
audio....im working on it.......... trying to find a mic that will work ......
does this exist: mic to rca audio????
Thread Starter
Member
Joined: Mar 2001
Posts: 1,303
Likes: 0
From: Orange, Ca, USA
Re: Minty's new camera setup, thought i would share (Dre_Chan)
the one on your spoiler looks like the APC indiglo muffler 
true..yah it does
those led are there for a reason...NIGHT VISION!
When im not using it on the car, it is my car security. I have the camera mounted on my house and pointed at my car from night to day. The video is recorded on to my computer using my tv tuner on the comp.
Good way to see what goes on around the car
[Modified by MintyDip, 3:42 PM 8/8/2002]
Member
Joined: Nov 2001
Posts: 2,100
Likes: 0
From: Pegging the bling meter
Re: Minty's new camera setup, thought i would share (MintyDip)
There is a protective cap on the lens. It can be unscrewed and replaced if dmg
Waiting for my GF to return my power inverter so i can power these bad boys and make some vids
Reguarding vibrating. I had a previous setup very similar to this and it didnt vibrate, but the camera was the size of a dime.....
I need to desgin somethign that will keep the front camera from moving...
Teh rear is super stable
Does you GF use the power inverter to power her vibrator
.....sorry, just couldn't resist
Thread Starter
Member
Joined: Mar 2001
Posts: 1,303
Likes: 0
From: Orange, Ca, USA
Re: Minty's new camera setup, thought i would share (canuck-mx6)
There is a protective cap on the lens. It can be unscrewed and replaced if dmg
Waiting for my GF to return my power inverter so i can power these bad boys and make some vids
Reguarding vibrating. I had a previous setup very similar to this and it didnt vibrate, but the camera was the size of a dime.....
I need to desgin somethign that will keep the front camera from moving...
Teh rear is super stable
Lol, he said GF, Power inverter and vibrate all in the same reply......
Does you GF use the power inverter to power her vibrator
.....sorry, just couldn't resist
Thread Starter
Member
Joined: Mar 2001
Posts: 1,303
Likes: 0
From: Orange, Ca, USA
Re: Minty's new camera setup, thought i would share (Grandprix)
Front problem solved
Solution: plexy glass covering useing the plate holes
NEWS: Side camera might be up as well Just need to make the bracket. I have the desgin
gonna bolt onto the side skirts and be protected by plexy glass as well
Picutres comign soon
Solution: plexy glass covering useing the plate holes
NEWS: Side camera might be up as well
Just need to make the bracket. I have the desgingonna bolt onto the side skirts
and be protected by plexy glass as wellPicutres comign soon