getting out of hondas so i'm parting my car out since i had no luck selling it whole
if prices seem too high for the small items its probly cause i'm guessing the value so please feel free to make an offer worse thing i can do is say no

rolling chassis 2600 obo http://www.hondamarketplace.co...12694

-Golden eagle Sandwich Plate 6an feed to the head ls vtec kit
comes with all fittings line and dowels 120$

-Valve cover and breather setup 16an lines and cans plus block fitting 300$ shipped

B-series starter 50$ shipped

B-series alternator 75$ OBD2 shipped

Engine mounts for b-series includes tranny bracket no ac bracket 100$ or i can split them up if you need an individual one

ARP Head studs 60$ shipped

-P72 GSR head 1000$ OBO i'm pretty firm on this i've got 1500 in parts and machining work in this head not including the porting or the purchase of the head
all machine work on the Head was done by STEWARTS Engines on gasoline alley in indianapolis
-fully ported and polished
-5 angle performance valve job
-Ferrea Stock size valves
-Ferrea Bronze valve guides
-Ferrea Turbo endurance Dual Valve springs
-Ferrea Ti Retainers, Seats and locks
-Aebs B16 Intake manifold Port matched and drilled for the gsr head :comes with the head

-GSR cams 80$ shipped

-Vtec Solenoid 40$ shipped

-OEM OBD2 GSR Distributer 100$ shipped

-GSR crank $120 Shipped

-Transmission 750$ OBO has no grinds and shifts super smooth
B16 casing With GSR gears and F/D
OBX LSD

-Intermediate shaft and axels the axels are basicly brand new 120$

-B-series Shift Linkage $30 probly pickup only due to size

B-series aluminum radiator 50$

-Clutch Masters Stage 5 Dual diaphram Pressure plate 4 Puck unsprung
and stock gsr flywheel 250$ barely has any millegae on it


Intake and fuel

SOLD !-Aeromotive Fuel rail 8an and the large aeromotive A1000 10an FPR :250$ shipped

SOLD!-Walbro 255HP pump 50$ shipped

SOLD!-Precision 1000cc Injectors 200$ shipped

Turbo setup

-Holset HX52 Turbo
67mm inducer 98mm exducer
comparable to a GT42 or s368 ,4 an oil feed 10an drain
-Home made Twinscroll TopMount Manifold SS sch10 1/2" flanges
-Synapse 50mm wastegate
-4" open downpipe dumps out infront of motor
also includes front AC mount as it had to be shaved down to make room for the turbo and manifold
1000$ for manifold turbo oil line wastegate downpipe and dump tube

-motorola 4bar map sensor 110$ shipped

OBD2 AEM EMS 600$ shipped, comes with obd2-obd1 jumper harness so it will plug into an obd1 car

CBR 600rr coils and harness 75$ shipped

-TYC One piece black housing headlights with BMW Bi Xenon HID projector retrofit 5k bulbs, so it has true high and low beam HID very awesome 400$ shipped,for headlights HID bulbs Balast ignitors and high beam wiring these are plug and play plug right into the stock head light wiring


i'm forgettting alot of stuff too so if there is anything you need let me know i may have it











Modified by b20vtechb at 2:51 AM 10/20/2008


Modified by b20vtechb at 3:01 AM 10/20/2008


Modified by b20vtechb at 3:06 AM 10/20/2008


Modified by b20vtechb at 3:30 AM 10/20/2008


Modified by b20vtechb at 3:49 AM 10/20/2008


Modified by b20vtechb at 3:54 AM 10/20/2008


Modified by b20vtechb at 4:03 AM 10/20/2008


Modified by b20vtechb at 4:06 AM 10/20/2008


Modified by b20vtechb at 4:09 AM 10/20/2008


Modified by b20vtechb at 4:11 AM 10/20/2008


Modified by b20vtechb at 4:17 AM 10/20/2008


Modified by b20vtechb at 4:27 AM 10/20/2008


Modified by b20vtechb at 4:28 AM 10/20/2008


Modified by b20vtechb at 1:03 AM 10/23/2008


Modified by b20vtechb at 11:41 AM 11/16/2008

 

BUMP 1

 

bump 2

 

how much power did u put out?

how much for just turbo nothing esle?

 

i had problems with it on the dyno that i couldn't figure out till afterwards... somehow i had a coil that was missing the spring that goes to the dist cap, but it made 360whp on a dyno dynamics dyno at only 8 psi. and it was missing very badly on those pulls.. i don't really want to seperate the turbo and manifold the flange for the turbo was custom made for the hx52 its very similar to a t4 flange but the bolt holes are spaced slighty wider


Modified by b20vtechb at 11:26 PM 10/20/2008

 

bump again

 

nobody? make offers!

 

bump i need this **** GONE!!!

 

UPPP buy me!

 

bump come on!!! make offers

 

bump

 

bump

 

How much for the turbo no manifold.

 

I sent you a PM a few days ago....

 

got a b series obd2 dizzy?

 

pmd you about the turbo kit good deal bump

 

still want to know about turbo kit that i pmd you bump for waiting

 

Bump for looking.