FS: D-series ramhorn manifold T3/T4 and 38mm flanges
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 2,221
Likes: 0
From: Minneapolis, MN, USA
FS: D-series ramhorn manifold T3/T4 and 38mm flanges
It doesn't look the greatest and has been re-welded due to a previous leak and then ceramic coated. I don't have any use for it as I have an RLD-Fab manifold (horrible company btw, didn't even check the decking on the manifold before sending it out, HUGE exhaust leak!). It has no leaks in the runners now. May want to consider resurfacing the flanges, but the previous owner didn't run gaskets (except at the head) so that may have been why you see some black towards the outside of the flanges. MAKE ME AN OFFER, a SERIOUS one!!! I paid $350 for it, but am not asking that much.
Ramhorn Manifold 1
Ramhorn Manifold 2
Ramhorn Manifold 3
Collector pics
Modified by b18_ef_hatch at 9:33 AM 5/20/2008
Ramhorn Manifold 1
Ramhorn Manifold 2
Ramhorn Manifold 3
Collector pics
Modified by b18_ef_hatch at 9:33 AM 5/20/2008
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 2,221
Likes: 0
From: Minneapolis, MN, USA
Re: FS: D-series ramhorn manifold T3/T4 and 38mm flanges (ReDemoN)
You should make me an offer please so I know if it's worth the time and headache to figure it out. Thanks
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 2,221
Likes: 0
From: Minneapolis, MN, USA
Re: FS: D-series ramhorn manifold T3/T4 and 38mm flanges (EJ8 944)
I wish I could remember lol. I know it was a name brand and that last time the original owner told me I looked it up and it was about $700 + shipping new.
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 2,221
Likes: 0
From: Minneapolis, MN, USA
Re: FS: D-series ramhorn manifold T3/T4 and 38mm flanges (qweakers)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18_ef_hatch »</TD></TR><TR><TD CLASS="quote">MAKE ME AN OFFER, a SERIOUS one!!! I paid $350 for it.</TD></TR></TABLE>
Should be a pretty good indication on price...
Should be a pretty good indication on price...
Re: FS: D-series ramhorn manifold T3/T4 and 38mm flanges (EJ8 944)
it's a pretty good indication of what you paid for it, are you seriously trying to get back that much, if so good luck 
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 2,221
Likes: 0
From: Minneapolis, MN, USA
Re: FS: D-series ramhorn manifold T3/T4 and 38mm flanges (qweakers)
If you read right after that in the original post it says,
"MAKE ME AN OFFER, a SERIOUS one!!! I paid $350 for it, but am not asking that much."
Would you please read the WHOLE ad before posting anymore stupid comments in my thread!?
"MAKE ME AN OFFER, a SERIOUS one!!! I paid $350 for it, but am not asking that much."
Would you please read the WHOLE ad before posting anymore stupid comments in my thread!?
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 2,221
Likes: 0
From: Minneapolis, MN, USA
Re: FS: D-series ramhorn manifold T3/T4 and 38mm flanges (EJ8 944)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ8 944 »</TD></TR><TR><TD CLASS="quote">could you get a shot inside to show the collecter? maybe the inside of the flange too</TD></TR></TABLE>
Yes, I can get it tomorrow. Thanks
Yes, I can get it tomorrow. Thanks
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 2,221
Likes: 0
From: Minneapolis, MN, USA
Re: FS: D-series ramhorn manifold T3/T4 and 38mm flanges (cbustuner)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cbustuner »</TD></TR><TR><TD CLASS="quote">did you get any numbers with this before swaping out to the other ramhorn or did you just buy this and not use it?</TD></TR></TABLE>
This was on a friends car on a stock motor, but I don't remember the numbers. I just PM'd him about it though, so I'll post it up soon. I never used it as I got a good deal from a different friend for his new RLD-Fab mani.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ8 944 »</TD></TR><TR><TD CLASS="quote">you get pics of the collector yet?</TD></TR></TABLE>
No, I completely forgot about that. When I get home after finals today I'll get them and post them.
This was on a friends car on a stock motor, but I don't remember the numbers. I just PM'd him about it though, so I'll post it up soon. I never used it as I got a good deal from a different friend for his new RLD-Fab mani.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ8 944 »</TD></TR><TR><TD CLASS="quote">you get pics of the collector yet?</TD></TR></TABLE>
No, I completely forgot about that. When I get home after finals today I'll get them and post them.
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 2,221
Likes: 0
From: Minneapolis, MN, USA
Re: FS: D-series ramhorn manifold T3/T4 and 38mm flanges (cbustuner)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cbustuner »</TD></TR><TR><TD CLASS="quote">did you get any numbers with this before swaping out to the other ramhorn or did you just buy this and not use it?</TD></TR></TABLE>
Ok, I forgot he had it street tuned (never dyno'd). He said 250 @ 10psi wouldn't be stretching it all and capable of well over 400whp. I saw it a few times and the car was very quick for such low boost, stomped all over my b18 powered EF hatch. I hope this helps.
Ok, I forgot he had it street tuned (never dyno'd). He said 250 @ 10psi wouldn't be stretching it all and capable of well over 400whp. I saw it a few times and the car was very quick for such low boost, stomped all over my b18 powered EF hatch. I hope this helps.
Honda-Tech Member
Joined: Jul 2003
Posts: 441
Likes: 0
From: columbus, ohio, usa
Re: FS: D-series ramhorn manifold T3/T4 and 38mm flanges (cbustuner)
Also and while we are at it pm me a price. I know you said make an offer but i don't like doing that,because I'm not trying to offend you by lowballing you.Shoot me a price and we will go from there.