Ok, I have heard from a few people now that the rear camber can be adjusted on the 95 Accords using the longer bolts and adding washers trick. I did this on my 98 Civic and just wondering what bolts you use and which ones are replaced. It was two bolts with my civic that connected the control arm to the chasis of the vehicle. Just like in the picture:



I need to know what bolts (exact sizes) and where the bolts are located on the car.

Thanks a lot!

PS <> The coilovers are in and riding good!

 

http://www.jdmfan.com/technical/suspension/rear_camber/

 

01GSR has photos of his washer camber kit install. Unfortunately, he's on vacation, so do a little searching.

 

Ok, I know how to do the civics camber. I did mine and have plenty of pics of the adjustment.

Did you post that link for the civic because it's the same?

That will be nice if it is the same >>> VERY easy task to handle!!

Thanks!

 

hope those work out for your brother alright

 

I was pointed to that page by 01GSR (i think) when I asked about this.. I'm guessing it should be very similar.