Notices
Vehicles for sale Post vehicles for sale only

FS/FT/TW: Built S13 240sx *GT2871R, Works, Bride, Stance, Autopower, Nardi***Clean as F@#$*** MN

Thread Tools
 
Search this Thread
 
Old Mar 4, 2008 | 09:08 AM
  #1  
HYPERION-X's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2003
Posts: 197
Likes: 0
From: Twin Cities
Default FS/FT/TW: Built RHD S13 240sx *GT2871R, Works, Bride, Stance, Autopower, Nardi***Clean as F@#$*** Mi

I'm located in Minneapolis, Minnesota. I will ship at your expense but not until the check clears or is verified. If you want to trade you need to come here or relatively close to here as I don't have the time to travel too far.

I will consider a variety of options like an Integra (DC or DA), EK with a K20, EF, RSX, or at least something with a back seat. I want something clean.

I bought the car in February 2007. It already had an SR (about 35000 miles) in it and was converted to RHD that was very cleanly (cleanly?) done. No rust anywhere at all. As mentioned the car was very clean when I bought it.

From there the entire car was stripped, including the glass, and was put on a wooden dolly for paint/bodywork. The whole car was painted inside and out. As you’ll see the side markers, squirters, badges, and antenna have been shaved. Every single part on the car was touched. It was either replaced by new OEM, new aftermarket, or was reconditioned and painted.

There was a lot of custom work done too. It’s not noticeable in the pictures but the firewall was smoothed out with fresh steel along with where the battery sat and on the opposite side.
You will notice that there is no brake booster. We custom installed a Wilwood Pedal Box and Wilwood Master Cylinders, which have been relocated behind the gauge cluster. The cable e-brake was removed and replaced with a K-Sport hydraulic e-brake.

The wire harness was completely reworked with all of the unused wires deleted. Almost all of the harness has been wrapped in a mesh sheath and was tucked.

There is no ac, though it does have heat. I kept the heater core and wired in a fan to the back of it that is controlled from the ARC panel. We made brackets that are riveted to the floor that aim the heat on the driver’s feet. It works really well.

This car is super clean. I’ve gotten lots of positive feedback from everyone that has seen it in person. From your average Joe to enthusiasts, to the best drifters in my area, some of who have their Formula D license.

I have way over $23k in this car with receipts to prove it. I have pictures throughout the whole build. There is probably a lot more I’m missing.

Only two things need attention, the power steering pump is shot (I have a replacement) and the cluster has not been connected. The wires are there but need to soldered in.


PAINT & BODY
· Taffeta White paint
· Fenders rolled and slightly pulled
· Shaved badges, rear side markers, antenna, wiper holes (No wipers or wiper motors)
· Silvia Conversion
· Aero Catch Hoodpins (Locking)
· Circuit Sports Hood Dampers


WHEELS
· Work Emotion XD9 I Matte Bronze
· Front 17x8.5 +27 & Rear 17x9.5 +17
· Tires – Federal 595 – Front 215/40/17 & Rear 235/40/17


SUSPENSION & BRAKES & STEERING
· Stance GR + Pro Coilovers
· Custom solid subframe mounts
· Front tension rods
· RUCA
· Traction rods
· Toe rods
· Brakes – (z32 30mm 300zx TT) calipers and rotors
· Hawk HPS Performance Street Compound Pads Front & Rear
· Full Stainless Brake lines
· Hydraulic E-brake – K-Sport
· 5 lug hubs – Attain
· FRS Aluminum Steering Bushing


ENGINE & DRIVETRAIN
· Turbo – Garret GT2871R .64ar
· DC Sports Exhaust Manifold
· Coated Turbo & Exhaust Manifold
· HKS Exhaust
· DRFT turbo lines
· New OEM Turbo Inlet Gasket
· Mr. Gasket Exhaust Manifold Gasket
· Apexi Intake
· Z32 MAF
· DeatschWerks 740 cc Injectors
· Walbro 255 Fuel Pump
· Braided –6 Fuel Lines
· New OEM Z32 Fuel Filter
· Freddy Intake Manifold (Cleaned up and painted)
· Cams - HKS 264 in/ex step 1’s
· Cometic Head Gasket
· Decked head
· ARP Headstuds
· Greddy Downpipe w/extension
· Megan Testpipe
· Turbo Elbow
· Rom Tune – Enthalpy
· FMIC – Custom Sandwich Mount
· Custom Intercooler Piping
· ATP Silicone Couplers & T-Bolt Clamps
· Tial 50mm blow-off valve
· Kaaz 2-way LSD (Properly broken in)
· 2-Piece Driveshaft
· SPL Urethane Tranny Mount
· Koyo Aluminum Radiator
· New OEM Thermostat
· New OEM Timing chain
· New OEM Water Pump
· Electric Fans & Thermostat
· New OEM Thermostat
· Circuit Sports Coolant Reservoir
· Circuit Sports Catch Can
· HKS D1 Limited Edition Oil Cap


INTERIOR
· Clean uncracked dash
· (2) Bride Brix II w/Bride MO Rails (Real with documentation)
· Nardi Sport Type A steering wheel w/Momo hub
· Autopower 4-point Race Roll Bar
· Gauges – STRi Boost, Oil Pressure, Oil Temp, & Coolant Temp
· Wilwood Custom Pedal Box Setup
· Wilwood master cylinders relocated under the dash
· Tomei Duracon shift ****
· C’s short shifter
· ARC 4 Panel Switch
· New OEM Shift Boot
· 5-Point Harnesses


PICS

Bodywork







Painted















Being Built











Engine







Rolling







Modified by HYPERION-X at 8:30 PM 7/5/2008
Old Mar 4, 2008 | 09:14 AM
  #2  
hrs-parker's Avatar
Honda-Tech Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 5,836
Likes: 0
From: IN WISCANSIN
Default Re: FS/FT/TW: Built S13 240sx *GT2871R, Works, Bride, Stance, Autopower, Nardi***Clean as F@#$*** Mi

[freak]ing sweet...G/L
Old Mar 4, 2008 | 10:29 AM
  #3  
cooltron's Avatar
Honda-Tech Member
 
Joined: Oct 2006
Posts: 514
Likes: 0
From: San diego, CA, USA
Default Re: FS/FT/TW: Built S13 240sx *GT2871R, Works, Bride, Stance, Autopower, Nardi***Clean as F@#$*** Mi

How many miles on chasis ( or odo ). What year is the car? Clean title i assume?
Old Mar 4, 2008 | 04:18 PM
  #4  
HYPERION-X's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2003
Posts: 197
Likes: 0
From: Twin Cities
Default Re: FS/FT/TW: Built S13 240sx *GT2871R, Works, Bride, Stance, Autopower, Nardi***Clean as F@#$*** Mi

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cooltron &raquo;</TD></TR><TR><TD CLASS="quote">How many miles on chasis ( or odo ). What year is the car? Clean title i assume?</TD></TR></TABLE>

Honestly I don't know how many miles on the chassis. The odometer is the one from the RHD swap which I've rolled to exactly 000000. I've put less than 1000 on it since the build. It is a '92 or '93, I have to look at the title.

I never checked the title based off of the inspection we gave the car before purchase and the fact that we were going to completely rebuild the whole car.

The engine has about 35,000 on it and was the cleanest SR20 my friends and I have ever seen.
Old Mar 4, 2008 | 04:19 PM
  #5  
HYPERION-X's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2003
Posts: 197
Likes: 0
From: Twin Cities
Default

Oh and title in hand, no lien.
Old Mar 4, 2008 | 04:32 PM
  #6  
pwrofdrm's Avatar
Honda-Tech Member
 
Joined: Nov 2003
Posts: 3,494
Likes: 0
From: NY
Default Re: (HYPERION-X)

Awesome work, very clean 240 you have there

How much would you want for it cash?
Old Mar 4, 2008 | 04:37 PM
  #7  
cooltron's Avatar
Honda-Tech Member
 
Joined: Oct 2006
Posts: 514
Likes: 0
From: San diego, CA, USA
Default Re: (pwrofdrm)

Looks super sweet, very nice job. Sick engine too. I dont think i have the kind of cash for it, good luck
Old Mar 4, 2008 | 05:04 PM
  #8  
HYPERION-X's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2003
Posts: 197
Likes: 0
From: Twin Cities
Default

PM'd
Old Mar 4, 2008 | 05:13 PM
  #9  
winteR`'s Avatar
Honda-Tech Member
 
Joined: Jun 2007
Posts: 205
Likes: 0
From: ny
Default Re: FS/FT/TW: Built RHD S13 240sx *GT2871R, Works, Bride, Stance, Autopower, Nardi***Clean as F@#$**

http://www.hondamarketplace.co...10319

i will drive to you to make this trade work... let me know i want this 240 and info of where it goes if i dont get it
Old Mar 4, 2008 | 05:33 PM
  #10  
guessinthe2000's Avatar
Honda-Tech Member
 
Joined: May 2005
Posts: 715
Likes: 0
From: Littleton, CO, 80120
Default

would u trade for a bike... 03 CBR 600rr. LMK if intersted by PM, thanks
Old Mar 4, 2008 | 05:50 PM
  #11  
macDelli's Avatar
Honda-Tech Member
 
Joined: Apr 2005
Posts: 6,854
Likes: 0
From: FiveThreeOhhh
Default Re: FS/FT/TW: Built S13 240sx *GT2871R, Works, Bride, Stance, Autopower, Nardi***Clean as F@#$*** Mi

Old Mar 4, 2008 | 06:13 PM
  #12  
stock_si's Avatar
Honda-Tech Member
 
Joined: Oct 2007
Posts: 792
Likes: 0
From: \//\
Default

soo sweet. Got any pics of the front? Nice work. People asking you to trade for bikes lol. Whats the price?
Old Mar 4, 2008 | 06:18 PM
  #13  
crowder13's Avatar
Honda-Tech Member
 
Joined: Sep 2006
Posts: 665
Likes: 0
From: knoxville, tennessee, usa
Default

cleanest s13 ive ever seen
Old Mar 4, 2008 | 06:53 PM
  #14  
Mr.OB*GYN_Rhett's Avatar
Honda-Tech Member
iTrader: (2)
 
Joined: Dec 2003
Posts: 24,554
Likes: 0
From: The heart of cat bong
Default Re: (crowder13)

amazing
Old Mar 5, 2008 | 06:15 AM
  #15  
HYPERION-X's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2003
Posts: 197
Likes: 0
From: Twin Cities
Default

Unfortunately I don't have any more pics of the front. The only pics I have are when it was still in the paint booth without the headlights and corner lights.
Old Mar 5, 2008 | 08:22 AM
  #16  
jdm_cert's Avatar
Junior Member
 
Joined: Feb 2006
Posts: 307
Likes: 0
From: chicago, IL, USA
Default Re: (HYPERION-X)

email me with your number please... jdm.cert@gmail.com
Old Mar 5, 2008 | 10:28 AM
  #17  
Brewer's Avatar
Honda-Tech Member
 
Joined: Nov 2001
Posts: 12,063
Likes: 2
From: The Ham, AL
Default Re: (jdm_cert)

Amazing car
Old Mar 5, 2008 | 10:36 AM
  #18  
4NLINE UNLIMITED's Avatar
Honda-Tech Member
iTrader: (4)
 
Joined: Dec 2004
Posts: 4,344
Likes: 1
From: Bellevue/NE, Dallas/TX, USA
Default Re: (Brewer)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brewer &raquo;</TD></TR><TR><TD CLASS="quote">Amazing car </TD></TR></TABLE>
Werd!
Old Mar 5, 2008 | 02:23 PM
  #19  
WanganRunner's Avatar
Honda-Tech Member
 
Joined: Nov 2007
Posts: 311
Likes: 0
From: DC Metro Area
Default

Email me what you're looking for (cash).


Keifeinzel (at) gmail (dot) com
Old Mar 5, 2008 | 06:53 PM
  #20  
enigma94's Avatar
Member
 
Joined: Mar 2003
Posts: 2,496
Likes: 0
From: Mesa Town, AZ
Default Re: (WanganRunner)

PM'd
Old Mar 6, 2008 | 10:05 AM
  #21  
HYPERION-X's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2003
Posts: 197
Likes: 0
From: Twin Cities
Default

I will ship at your expense but not until the check clears or is verified.
Old Mar 6, 2008 | 11:38 AM
  #22  
NIKE SB'd's Avatar
Honda-Tech Member
iTrader: (1)
 
Joined: Sep 2002
Posts: 14,715
Likes: 1
From: Turning the haters into likers
Default

HOLY ****!
Old Mar 7, 2008 | 10:04 AM
  #23  
HYPERION-X's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2003
Posts: 197
Likes: 0
From: Twin Cities
Default

I have lots of spare stuff and two Skyline R32 wheels to go with it too.
Old Mar 9, 2008 | 02:03 PM
  #24  
92eh3's Avatar
 
Joined: Feb 2008
Posts: 17
Likes: 0
From: summerfield, ohio, usa
Default

will you take a 94 teg gsr with a rhd front clip
Old Mar 13, 2008 | 05:46 AM
  #25  
k3vin337's Avatar
Honda-Tech Member
 
Joined: Jan 2007
Posts: 215
Likes: 0
From: Mahopac, NY
Default

https://honda-tech.com/zerothread?id=2239833
trade?



All times are GMT -8. The time now is 10:57 PM.