I picked up a set of honda access window visors recently but i cant read japanese and therefore the instructions are useless. I wes searching a couple of weeks ago and i know i found a inage where the translations had been written but i can for the life of me remember what i searched or where i cound it. If anyone has the translation i would greatly appreciate it if i could have it. Thanks.

 

awwwww. The beauty of JDM parts.

 

teah they are really frustrating sometimes...i was hoping to get these on today on m day off but its not looking promising.

 

Here's a few links I came across:

https://honda-tech.com/zerothread?id=718474
https://honda-tech.com/zerothread?id=799052

Ali

 

there pretty easy, you don't need to cut any of the rubber around the window, just pull them off, and put the clips in appropriately, the clip that goes all the way by the mirrors doesn't have a hole in the door frame for the screw to go in btw, and the last clip all the way at the end of the door (the one on the side of the door frame not one of the four that are on the top of the door frame) is useless. Just line everything up and screw the visors onto the clips

 

thanks but i have already seen those, i just want a translation of the instructions its easier for me to use that. Thanks for the help though.

This is about the best link i have found yet, but its for an ek...dont know how different they are. https://honda-tech.com/zerothread?id=1912358

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jgirard &raquo;</TD></TR><TR><TD CLASS="quote">there pretty easy, you don't need to cut any of the rubber around the window, just pull them off, and put the clips in appropriately, the clip that goes all the way by the mirrors doesn't have a hole in the door frame for the screw to go in btw, and the last clip all the way at the end of the door (the one on the side of the door frame not one of the four that are on the top of the door frame) is useless. Just line everything up and screw the visors onto the clips</TD></TR></TABLE>

so on the clip closest to the mirror i will have to drill a hole in the door frame?

 

you can if you want, but I didn't and I don't belive Jjunn did either, he got his car up to like 130mph or something and he said he had no problems, I set the clip in there with duct tape so that way you can still screw it in to the visor and the rubber window seal will give some hold too

 

i never drilled anything into the door frame


those fuggers have seen 160+ and i had no problems

 

ok thanks for the tips. On the rear two clips i use the small silver things to lock them into place. And are all the other holes already in the door frame? How long did the install take you?

well 130 and 160...looks like the front clip and rear clip arent necessary. That will save me some trouble.

 

Yeah, don't drill anything and don't but any rubber, the furthest clips (to the right) aren't needed, and like Geoff said... mine have seen top speeds and no budge at all. It's just a pain in the *** to align the others thats all...

 

Just look at the pictures...What guy reads the instructions anywaise??

 

Where are you located? I can help you out if you're near OC / LA in SoCal.

I've installed several sets of DC visors. I even drill the hole, because I'm crazy like that.

 

i have installed four different sets now and they are easy...no drilling of holes...just take the trim off and line up the brackets that fit under the trim with the brackets on the visors and do it all the way up the door....i cut a half inch slit in the trim to fit the metal bracket to fit around it becasue i wanted it to sit flush and just connect that and you should be good...being a noob the first time, just make sure you get those damn window seals put back and overlaid right or it will leak.

 

I drilled the holes, they have been on for 5 years w/o any problems.
I just used the pictures

 

Thanks a ton for the help guys i got them installed and it only took about an hour.

I ended up drilling the front holes just to be safe and i also got the back clips installed too. Just used the pictures and jgirard's advice, total install time was about an hour. I would post pics but car is dirty... .