im thinking of doing a mini me on my d16a6 with a y8 head but dont know where to start. Im going thru diffrent forums but each one had a different parts list. Anybody know what are the right parts list to do a mini me.

 

search search search !!!!!!!!!!


In case "YOUR"<U></U> search button us broken then start with:

-Y8 head
-Summit Y8 arp head stud kit ( gives you the correct head studs + arp )
-New Y8 head gasket
-New water pump ( do it right while you have the timing belt off!)
-New distributor (Y8/Y7)
-http://www.Rywire.com distributor harness
-MPFI swap from Rywire (needed for models less than si/hf) or hf swap
-Vtec ecu (p28, po8, etc)
-Injector resistor box (if staying with obd0 injectors)

you will need to do the following:

-take oil restrictor out of edge of block between cylinders 2 and 3 (Y8 head has it in the head)
-wire mpfi
-wire vtec and vtec ecu
-plug in dizzy harness
-change head gasket and water pump
-swap heads
-TUNE TUNE TUNE TUNE

If i missed anything other than these things some one chime in and help me!