I just changed my transmission fluid. But I when to put the fill plug back in I think A little bit to much spilled out. Is there anyway I can add some more with out going through the fill hole? VSS

Looks like mine


Thank You

 

what do u mean a lil of it spilled out? your suppose to fill it up until the fill hole spills out then plug it up. and while your filling it up the car should be level in case if slanted in a way that the level of fluid is towards the fill hole and then u would underfill it. should be about 2 qts

 

Yes I know. I Had trouble with the angle i was at to get that bolt back in, so i jacked the car up a little more....That were the extra came out.

Can anyone answer the question?? of adding more without doing it through the fill hole.

 

Yes, you can do it through the VSS hole if you pull it out of the way. The tranny takes about 2.4-2.5 quarts not 2.

 

if u want to get technical then its 2.3 qts but usually it'll be around 2 qts cuz not all of it will drain out unless u let it sit there for awhile. anyway if u do it thru the that hole then u wont know the proper level unless it thru the fill hole , its up to u its your car your tranny.

 

Thank you. What number is the VSS on the diagram at the top?

 

i dont see it marked on your diagrapm. but there it is. that orange thing on the picture is intake. and underneath is the VSS. couldnt find a better picture. sorry. hope it helps.