lduque

I have been told they don't make this rear lip for the 01 Sedan.

Can anyone point to a site where I can find it?

Someone on here is selling one, im a bit skeptical though, just want to be sure I am buying the right one.




thanks


The link below is the pic of the lip

http://civic2001.myphotoalbum....Sedan


Modified by lduque at 8:52 AM 9/17/2007


Modified by lduque at 8:52 AM 9/17/2007


Modified by lduque at 8:52 AM 9/17/2007


Modified by lduque at 8:53 AM 9/17/2007

1llmatic

I haven't seen that lip before but here is pictures of the ones I know are available:

Type B for 01-02 4 dr civic

Type R style for 01-02 4 dr civic

lduque

I see one aftermarket lip for the 4 door. That one is preety sweet, but i am looking for the exhaust opening.

So is it safe to say the guy who says they selling the rear lip before is lying?

All the help would make a difference I wana buy this asap

1llmatic

that lip in your link looks like it could fit a 4 dr.

fventura03

iTrader: (1)

I'm almost sure the bottom half of the bumpers between a coupe and sedan is the same... it looks like it'd fit.

lduque

Fventura you have helped alot, can you tell me the name of this rear lip and also pics of some sedans that have it?

i am about to buy it before the day ends, but just want to be sure its the look I want!

thanks again

fventura03

iTrader: (1)

no problem, unfortunately - to date, i haven't seen a sedan with that rear lip, only the one above called "TYPE R" style.

just imagine what it'd look like, what other lips do you have? it might look a little odd just having a rear but nothing else...

it's not a bad looking lip though, i'm sure you'd like it.

lduque

Well the reason im buying that one right now cause it took me so long to find it. ( i am looking for the exhaust cut off the Type r has).

I have no intentions of putting that lip on alone. Im grabing that lip while its still available and buying the rest of the lip kit and lowering springs soon after.

Um, any coupes with that type r lip?

Just want an idea, since i dont see many mod sedans in nyc.

fventura03

iTrader: (1)

here's that type b

<StevieG>

me no likey just get a 04-05 rear bumper and let it be...........I dont like rear lips tho.........personally


Modified by 03civicdopejmd at 4:01 PM 9/17/2007

fventura03

iTrader: (1)

all i could find

lduque

thanks ventura,

I found this on Ebay, type r rear lip but it says its only for the 2 door. Would you know if this will fit the sedan as it looks exactly like the pic above?

http://cgi.ebay.com/ebaymotors...wItem

Id rather get this one, because is the combo front type r and rear lip any thoughts anyone?

1llmatic

the coupe and sedan rear bumpers are different.

There's a reason why its listed as a 2 door civics and there are other listings for 4 door civics

http://search.ebay.com/search/...ory0=

Since you found it on Ebay you answered your question. That lip doesn't fit your bumper.

fventura03

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1llmatic &raquo;</TD></TR><TR><TD CLASS="quote">the coupe and sedan rear bumpers are different.

There's a reason why its listed as a 2 door civics and there are other listings for 4 door civics

http://search.ebay.com/search/...ory0=

Since you found it on Ebay you answered your question. That lip doesn't fit your bumper. </TD></TR></TABLE>

i know the top part is different meaning they aren't interchangeable, but how about the bottom part, the dimensions and everything looks like it'd fit... that's what i mean.

fventura03

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lduque &raquo;</TD></TR><TR><TD CLASS="quote">thanks ventura,

I found this on Ebay, type r rear lip but it says its only for the 2 door. Would you know if this will fit the sedan as it looks exactly like the pic above?

http://cgi.ebay.com/ebaymotors...wItem

Id rather get this one, because is the combo front type r and rear lip any thoughts anyone?</TD></TR></TABLE>

up to you, not really feeling that lip though.

lduque

I will not go for the ebay the, thanks for the help. My biggest concern is buying the r type rear lip and it not fit. Since I have been told they don't make that kind for the sedan, although i have been searching for ages and this guy says he has them in stock..

The guy selling it i found through the misc and appearance forum in HT. I would imagine hes legitimate.

What experience do you guys have in buying from HT through paypal? I dont wana be stuck the part if its not gone fit.

Yea im paranoid, but i could use the help!.

im bout to say expletive it and buy the part. 110 with shipping for the rear lip alone.

fventura03

iTrader: (1)

forget about the rear lip IMO, get some nice front/sides (that's what i have). then get a 04-05 bumper later on...

i've purchased lots of stuff from forums, you need to research and make sure you are dealing with a legit person, if so, go for it. usually if something doesn't fit and it's because of your own fault, you may or not get your money back because its your fault for not researching good enough.

lduque

thanks again fventura, you saved me about a G in the help you given me, thanks again too illmatic,

I actually found the link to the dude who im buying from.

https://honda-tech.com/zero...50849

I appreciate all your help, will contact the dude and let you know how it turns out.


lenny

fventura03

iTrader: (1)

good luck man, glad i could help - i wish i was that lucky when i first started 4yrs ago. back then it was pretty much trial and error since the car was still pretty new and not much parts...

Curiouz_G

yea freddy, you got screwed over

lduque

Cool, im glad u helped me out, i been workin on the car alot, the progress is slow, ( meaning im broke, lol)

so little by litle all the pieces will be in place, looking to buy the complete lip by the end of the month and next month springs followed by rims.

will show pics

thanks again

1

lduque

well heres an update and it really sucks,

The guy i was gone buy the lip from says the lip i was looking for is unavailable.

this blowss!!!!

so now i see my only option is either getting the Type B or another rear bumper completely.

Any help on rear bumpers for the sedan with the exhaust cut out?

thanks again

fventura03

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Curiouz_G &raquo;</TD></TR><TR><TD CLASS="quote">yea freddy, you got screwed over </TD></TR></TABLE>

yep, for example, my turbo setup.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lduque &raquo;</TD></TR><TR><TD CLASS="quote">Cool, im glad u helped me out, i been workin on the car alot, the progress is slow, ( meaning im broke, lol)

so little by litle all the pieces will be in place, looking to buy the complete lip by the end of the month and next month springs followed by rims.

will show pics

thanks again

1
</TD></TR></TABLE>

make sure you paint everything before mounting it on the car...

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lduque &raquo;</TD></TR><TR><TD CLASS="quote">well heres an update and it really sucks,

The guy i was gone buy the lip from says the lip i was looking for is unavailable.

this blowss!!!!

so now i see my only option is either getting the Type B or another rear bumper completely.

Any help on rear bumpers for the sedan with the exhaust cut out?

thanks again
</TD></TR></TABLE>

that sucks, no, oem bumper has exhaust cutout *HINT HINT*

lduque

lol fventura , ur a funny dude hahahah

never will i mount my kit without painting.

yeap, seems a little fabrication is in my future

be on the look out!

daddy

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fventura03 &raquo;</TD></TR><TR><TD CLASS="quote">
that sucks, no, oem bumper has exhaust cutout *HINT HINT*</TD></TR></TABLE>

what do you mean? my 03 ex has a little half moon cut out above where the exhaust comes out. is that htat called an "exhaust cutout"?