We should have a full tubular manifold, turbo,downpipe and intercooler setup withing a couple weeks.

We are just finishing the manifold designs as we speak. Should have it complete for august time frame.

Kit should retail for around 3200 complete with all necessary hardware.
The manifold will be 304l Stainless steel t3.t4 flanges or t4 with a 40mm wg as the only optionl

 

 

WOW! Will you be able to keep AC? Too hot over here to live without it.

 

you will not be able to keep the AC on the full tubular manifold but on the medium size tubular you should be able too. I am makign to designs.

 

What all are you going to include in your kits viren?

 

manifold 304l stainless,
turbo custom VS racing spec,
downpipe flange with bend for downpipe after that you can do whatever you want since ther eis so many custom applications out there
full stainless line kit drain and feed
tial wg
intercooler
air filter with pipe to turbo
piping for intercooler
tial bov
Missing link
FMU 12:1 disc

--------- STG1 kit at 7psi should put down around 280-290hp with the turbo i have set up for it

STG 2 will include AEM EMS and 720 cc injectors fuel rail an fittings from filter to rail and back to drain. AEM fpr included as well 1:1

380 hp at 13-14psi

Stg3 will include all the above plus piston rods 960cc injectors for 20-28psi
500hp+



[Modified by b18bturbo, 11:44 PM 6/15/2002]

 

 

Damn that sounds good.

 

Sounds Like a good deal Viren..!!!!!

 

manifold looks good so far

 

Nice! Should be a great kit.

 

I'm thinking about producing kits too...would you guys rather use a straight t3 for street applications? or t3/t4?

Viren, can you hook me up with the tial WG's and Greddy or tial BOV for bulk orders? I don't have a shop and nobody will supply to me without me owning a shop


[Modified by Slow_ass_4dr, 3:06 PM 6/19/2002]

 

viren is hot.

 

specs on turbo's????
howmuch off if you ditch the missing link and fmu?

 

Will we be able to buy bits and pieces? Like just the manifold? Pictures!!

 

Keep me update Viren. How big is the I/C?

 

pics pics pics!!! are u willing to sell the manifold? thanks.

 

Its 25 bux to register a sole propritorship (cert. of assumed name) with the state of MN and its good for 10 years

 

 

pictures of vs manifold =

 

yes i can email me and ill give you price break down,,,,

 

kit is almost ready.. ill will be testing it out on arts car in the near future the race version will take a little longer to test out and fabricate everything street version should be ready middle of this month. for use.

 

You can test it out on my car too. I have a 00 si