I'm going to be doing an JDM H22a Swap very soon...

Anyone know of any websites where I can find info and part-lists to make this smooth?

Which Axles?
ECU - Can Chipped P28 be used? Which Proggie works best...?
Mount Kit Recommendations
Places to acquire nice JDM or EDM H22a Motors\LSD Tranny?
Harness...blah blah

I've never looked into the H22a route, but this is for a friend.

Thanks,

Suprdave

 

jdmhondaparts.com for mounts, harnesses, etc.

for ecu, i'd go with the p13, or chipped p28 will also work fine.

for mounts, i am going to go thru Hasport, but place racing is also fine.

for axles, i would go thru raxles (even though they could break over a while with too much power), or you can get beefy axles from driveshaftshop.com.

 

place racing mounts are not ok. Alot of people have had problems with them. I would recommencd either the hasports or hcp mount kit.

 

I know several people who have had problems with both HCP and place racing. Only one i would recommend is Hasport.

they are a little more pricey, but definantly worth it.


[Modified by poison, 10:02 AM 6/10/2002]

 

I am running an H22a in my 96 civic coupe and i used the place racing kit with there axles and they work great. I drive it everyday and race it on the weekends. I know people with both the hcp kit and hasport kit and i have heard nothing but complaints from them like .. multiple broken axles fitment issuses etc.. The place racing kit definitly looks beefier then most and has the factory molded in eurathane instead of pressed in bushings. Also another good selling point that really drew me to them was the engine mounts are garunteed for life, and the axles are garunteed for a year.

 

HASport

 

hcp. i have them and they are fine and way cheaper