FS: Built B18C5 2.0L For Boost CP Pistons Oliver Rods Darton Sleeves
Thread Starter
Junior Member
Joined: Mar 2003
Posts: 959
Likes: 0
From: FL
FS: Built B18C5 2.0L For Boost CP Pistons Oliver Rods Darton Sleeves
This is what's for sale.
Block
B18C5 with a brand new ITR Crank
Darton 84MM Sleeves
CP 84MM Pistons @ 9:1
Oliver Racing Rods
OEM Bearings
Spoon baffled Oil Pan
ITR Head
Rev Valvetrain
Stock ITR Cams
50k on the head.
The head and block are assembled. It has been turned over to ensure everything works. It idles for 20 minutes and the oil was dropped. There is 0 miles on this motor.
$5500 FIRM
Call Keith - 754-264-6023
Modified by rizen at 9:11 PM 7/20/2007
Block
B18C5 with a brand new ITR Crank
Darton 84MM Sleeves
CP 84MM Pistons @ 9:1
Oliver Racing Rods
OEM Bearings
Spoon baffled Oil Pan
ITR Head
Rev Valvetrain
Stock ITR Cams
50k on the head.
The head and block are assembled. It has been turned over to ensure everything works. It idles for 20 minutes and the oil was dropped. There is 0 miles on this motor.
$5500 FIRM
Call Keith - 754-264-6023
Modified by rizen at 9:11 PM 7/20/2007
Thread Starter
Junior Member
Joined: Mar 2003
Posts: 959
Likes: 0
From: FL
Re: (Mr.OB*GYN_Rhett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.OB*GYN_Rhett »</TD></TR><TR><TD CLASS="quote">dang nice 
</TD></TR></TABLE>
Thanks!
</TD></TR></TABLE>Thanks!
Trending Topics
Honda-Tech Member
Joined: Jul 2006
Posts: 2,676
Likes: 1
From: South Florida
Re: FS: Built B18C5 2.0L For Boost CP Pistons Oliver Rods Darton Sleeves (rizen)
I'll vouch for this engine, I had a small role in it's creation.
Here are some pics as this engine currently sits in my Garage and when it was broken in:
Here are some pics as this engine currently sits in my Garage and when it was broken in:
official honda whore
Joined: Nov 2002
Posts: 8,454
Likes: 0
From: not tellin you where, pa, usa
Re: FS: Built B18C5 2.0L For Boost CP Pistons Oliver Rods Darton Sleeves (rizen)
am i the only one who thinks the price is a bit high? i was looking into a couple of setups like this last year and with a complete swap they were still a bit cheaper then the price mentioned??
Thread Starter
Junior Member
Joined: Mar 2003
Posts: 959
Likes: 0
From: FL
Re: FS: Built B18C5 2.0L For Boost CP Pistons Oliver Rods Darton Sleeves (coptzer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by coptzer »</TD></TR><TR><TD CLASS="quote">am i the only one who thinks the price is a bit high? i was looking into a couple of setups like this last year and with a complete swap they were still a bit cheaper then the price mentioned??</TD></TR></TABLE>
No offense bro, but I guess there is a reason you're rocking a 96%
No offense bro, but I guess there is a reason you're rocking a 96%
official honda whore
Joined: Nov 2002
Posts: 8,454
Likes: 0
From: not tellin you where, pa, usa
Re: FS: Built B18C5 2.0L For Boost CP Pistons Oliver Rods Darton Sleeves (rizen)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rizen »</TD></TR><TR><TD CLASS="quote">
No offense bro, but I guess there is a reason you're rocking a 96%
</TD></TR></TABLE>
ha ha i didnt come in here to cause any problems, but i just think your asking too much, i could try to break down parts on your post but i wont, just good luck tryiing to sell this within a years time
No offense bro, but I guess there is a reason you're rocking a 96%
</TD></TR></TABLE>
ha ha i didnt come in here to cause any problems, but i just think your asking too much, i could try to break down parts on your post but i wont, just good luck tryiing to sell this within a years time
Thread Starter
Junior Member
Joined: Mar 2003
Posts: 959
Likes: 0
From: FL
Re: FS: Built B18C5 2.0L For Boost CP Pistons Oliver Rods Darton Sleeves (coptzer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by coptzer »</TD></TR><TR><TD CLASS="quote">
ha ha i didnt come in here to cause any problems, but i just think your asking too much, i could try to break down parts on your post but i wont, just good luck tryiing to sell this within a years time</TD></TR></TABLE>
It will only help sell my item. Make sure to include links on the prices too!
ha ha i didnt come in here to cause any problems, but i just think your asking too much, i could try to break down parts on your post but i wont, just good luck tryiing to sell this within a years time</TD></TR></TABLE>
It will only help sell my item. Make sure to include links on the prices too!
Thread
Thread Starter
Forum
Replies
Last Post
TurboDANDEE
Classifieds: Forced Induction
25
Feb 11, 2004 01:11 PM
