FS: 92-95 Civic 6pt. Autopower Roll Cage

AutoPower 6pt Roll cage - BOLT IN
$500 OBO picked up or delivered local. $500 does not include shipping. Freight is ?? to ??
- Slightly used condition...
- Fits without removing stock interior except back seats and or cutting big holes in them
- Comes with all needed fasteners and backup plates
- SCCA and NASA Legal WITH ADDITION of a door bar on each side of cage (cost $50 from Ioport racing) or just get done at a local shop.
- It is painted Black from Autopower
- Minor Scratches
- Cage does not come with window net!
- If you want to run Fixed back Racing seats and belts safely, you need a roll bar or roll cage. This is the quickest and easy route to get a 6pt cage for racing.



$500 = a $350 discount!!!

This cage cost $750 pluss $100 shipping from IOport racing http://www.ioportracing.com/Me...AP581
or
http://www.pegasusautoracing.c...t.asp


Modified by 6spdKEG at 8:58 AM 7/16/2007


Modified by 6spdKEG at 1:21 PM 7/20/2007


Modified by 6spdKEG at 4:08 PM 7/24/2007

 

Smokin deal. I need one but, no cash for it today. Bumb for the deal.

 

pmD!!!!

 

didn't i sell that to you? didn't work out? not to hi-jack your thread without a free bump

 

yes, this wasyou cage. I never installed I haven't been able to scrounge up enough money for a set of racing seats that I want. I'm not installing a cage without seats ready to go in as well (personal preference)

Notes: Cage does not come with window net!

TRADES: partial, even or + $

Steering wheel setup: 330 to 350mm - Dished would be a pluss
--- quick release and hub adapter needed as well

R compound tires 225/45 or 50/15s
- (new or Newish) in order from most to least desirable
Kuhmo Victoracer, Advan A048, RA1, Nitto Nto1, Sport Cup, Hoosiers, Avon


Thanks for looking

 

pm'ed you

 

Buy Ryan's cage.

 

pm'ed you back

 

1st dibbs

 

as you can see i pmd first...i have 1st dibs

 

bump for good stuff

 

Thanks Alex

I'm having problems getting a good shipping price on this thing from a privateer.. .

anyone have any good Ideas?

I don't think I have any conections yet to send it through someones shipping account through DHL, Fedex or UPS so basically all the quotes I have gotten back are too high!!!

If I can't get a descent price on shiping (150 or less) then this thing is gonna have to be sold remotely local. I put an add up on http://www.Uship.com Hopefully I get a good bid from someone. I'll check that later tonight since I can't access my yahoo mail from work.

Thanks for viewing.

Ryan

 

where in Iowa are u located?

 

He's in Ames.

 

IA, 50010 > ladies.. .
Don't steal my ****!

 

Wish it was for a DC, bump for ya

 

I just had someone ask a question over PM
"So Does this come with everything in the picture except the door bars and the window netting"

YES and NO
NO window netting

YES to the door bars (2qty)
>>>> I stated in the first post that an ADDITIONAL Door bar for each side would have to be bought and or fabbed up for this cage to be NASA or SCCA legal. They are $50 pre-cut from distributors and I don't know where they reccomend you put them.

Another Question that Needs clarified
"Will this fit with a FULL interior?"
1.) rear seats need removed and or a big ol hole cut in them.. .
2.) NOTHING needs removed forward of the B pillars except some carpet holes for bolting or welding this thing in.. .

 

try baxglobal for shipping

 

SOLD SOLD SOLD

Local buyer, $400 cash


Modified by 6spdKEG at 7:58 AM 1/11/2008