Does anyone want my CX?
Thread Starter
Member
Joined: Dec 2000
Posts: 3,499
Likes: 2
From: Bellingham, WA, sucka
Does anyone want my CX?
92 Civic CX, red with black vinyl seats
125k on car, less than 10k on motor
ENGINE:
B16A2 99Si bottom end, legit, 100% stock
ITR cylinder head, purchased brand new from Acura.
01 ITR intake cam/98 ITR exhaust cam/AEM cam gears
1 layer headgasket(about 10.6:1 compression)
USDM ITR exhaust manifold w/ 2.25" resonated test pipe
A'PEXi N1 catback exhaust
Custom Iceman intake(64mm tapered upper piece)
MSD Digital 6 ignition w/ Blaster 3 coil and cap
Skunk2 chipped P28 ECU
Spoon thermostat, Spoon brake fluid "socks", and Spoon valve cover
OTHER:
Integra Type R transmission, purchased new from Acura
Fidanza aluminum flywheel and stock ITR clutch pack
Energy Suspension Motor Mounts
Z10 Traction bars
Vision JDM corners
Civic EX gauge cluster and lip spoiler
Car is fast, for what it is. The motor dyno'd at 168.8hp/114.1tq at the wheels.
Yes, it's a stock bottom end B16A.
Asking $6000.00 with stock wheels or $6500.00 w/ Rota Slipstreams
Located in Naples, FL
Oh! I forgot to mention that it has COLD *** A/C! Remember, this is Florida.
You better believe my A/C works.
[Modified by Mike K, 2:50 PM 6/4/2002]
125k on car, less than 10k on motor
ENGINE:
B16A2 99Si bottom end, legit, 100% stock
ITR cylinder head, purchased brand new from Acura.
01 ITR intake cam/98 ITR exhaust cam/AEM cam gears
1 layer headgasket(about 10.6:1 compression)
USDM ITR exhaust manifold w/ 2.25" resonated test pipe
A'PEXi N1 catback exhaust
Custom Iceman intake(64mm tapered upper piece)
MSD Digital 6 ignition w/ Blaster 3 coil and cap
Skunk2 chipped P28 ECU
Spoon thermostat, Spoon brake fluid "socks", and Spoon valve cover
OTHER:
Integra Type R transmission, purchased new from Acura
Fidanza aluminum flywheel and stock ITR clutch pack
Energy Suspension Motor Mounts
Z10 Traction bars
Vision JDM corners
Civic EX gauge cluster and lip spoiler
Car is fast, for what it is. The motor dyno'd at 168.8hp/114.1tq at the wheels.
Yes, it's a stock bottom end B16A.
Asking $6000.00 with stock wheels or $6500.00 w/ Rota Slipstreams
Located in Naples, FL
Oh! I forgot to mention that it has COLD *** A/C! Remember, this is Florida.
You better believe my A/C works.
[Modified by Mike K, 2:50 PM 6/4/2002]
Trending Topics
Honda-Tech Member
Joined: Jan 2000
Posts: 4,930
Likes: 0
Re: Does anyone want my CX? (FAST94GSR)
Does the ITR trans. have less than 10k miles also (as in installed at the time of the swap)? I would assume 'yes', since you bought it new.
I could use a hybrid up here in Wisconsin.... my dad bought one from Naples too (Greg's old '93 LS)
[Modified by Velvet Jones, 1:04 PM 6/4/2002]
I could use a hybrid up here in Wisconsin.... my dad bought one from Naples too (Greg's old '93 LS)
[Modified by Velvet Jones, 1:04 PM 6/4/2002]
If you don't mind me asking, why you selling it Mike?
ops u did ..haha sorry....ne way BUMP
New User
Joined: Oct 2001
Posts: 2,143
Likes: 0
From: Miami, FL
Re: Does anyone want my CX? (Mike K)
Mike I'm very intrested! I have a hatch that my friend wants to buy for $8000 and if i decide i dont want to keep my car, i will buy yours and use the 2 left over to build a block...get me more pics please, i might give you a deposit very soon if you still have the car for sale... Get me pics of the interior, motor body, and if you could go into a little more detail about the body...thanks. BTW: I'm in Miami, and i've even met you a couple times. I know forest and jared, i dont know if you remember them...
Honda-Tech Member
Joined: Oct 2001
Posts: 266
Likes: 0
From: Melbourne, FL, usa
Re: Does anyone want my CX? (owen_the_soyboy)
i can verify about those dyno # i was there to see them with my own eyes. I could hardly believe that his 1.6 could dyno higher peak #s than my 1.8. that car is a steal for that price, i only wish the body on mine was that straight. Somebody ought to ****** this up or i am going to try to have to find 6grand.
later
matt
later
matt
