can a jdm integra from clip fit on a ek coupe with direct bolt on, or do you need to mod radiator support and or other? sorry if this question has been asked before, I searched. thanks

 

No, it will not be a direct bolt-on. It requires cutting and welding.

 

does it require just changing the front radiator support, or do you need to change more?

 

Front fenders from each car/clip will need to be cut in half and re'welded back together, sanded, bondoed if necessary, and painted.

The radiator support will need to be changed.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy &raquo;</TD></TR><TR><TD CLASS="quote">Front fenders from each car/clip will need to be cut in half and re'welded back together, sanded, bondoed if necessary, and painted.

The radiator support will need to be changed.</TD></TR></TABLE>

is it cut to shorten or add length in the fenders? and how about width for hood?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by frankie11 &raquo;</TD></TR><TR><TD CLASS="quote">


is it cut to shorten or add length in the fenders? and how about width for hood? </TD></TR></TABLE>

Cutting it half means cut it 50/50?? 50/50 for both fender and weld it up, change the radiator support and everything will bolt on.

 

Cutting the fenders refers to taking the Civic fenders and the Integra fenders and cutting them from top to bottom in half. So each fender will have a front half and a bottom half.

Save the Civic rear section and the Integra front section. Then weld them together.

 

how to cut..??
any direction..??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JINEIL2EN &raquo;</TD></TR><TR><TD CLASS="quote">how to cut..??
any direction..??</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NOFX &raquo;</TD></TR><TR><TD CLASS="quote">Cutting the fenders refers to taking the Civic fenders and the Integra fenders and cutting them from top to bottom in half. So each fender will have a front half and a bottom half.

Save the Civic rear section and the Integra front section. Then weld them together.</TD></TR></TABLE>

 

Here's an example. On this car though, a 6th gen Civic front is being put on a del Sol.

I wouldn't do this yourself if you haven't before.

 

thanks for the info, does the hood need to be altered?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by frankie11 &raquo;</TD></TR><TR><TD CLASS="quote">thanks for the info, does the hood need to be altered?</TD></TR></TABLE>
no