i've been looking around and i've found one part here another there, and its getting really expensive. like $200. so if anyone can help me out, direct me somewhere, thatd be great. This is for ls/vtec.

thanx, Devon


[Modified by dub204, 4:20 AM 5/29/2002]

 

Check out http://www.cspeedracing.com. He's got them for a good price, and I think he has a good stock of them right now. Tell him Jacques sent you.





[Modified by Jaker, 8:56 PM 5/28/2002]

 

thanx i'll check that out.

 

Ill hook you up with one for $65... if interested PM me or email me at freakyteg@bendcable.com.

 

check out turbo-performance. com
they have all kinds of perks. and lines.. you ll get a good braided one..cheap

 

well i found a guy who has the oil line kit for $100, but it includes the ls headgasket, is that a good price?

 

what kind of head gasket, oem? new?
i got my b20 head gasket from Honda dealer for $61
i put together my vtec oil supply line kit for $26 from local performane shop

 

this is very similar to mine, but not quite as cheap as mine. it is t'd off the block similar to c-speed's


1. pipe bushing reducer (jegs.com)-3/8" to 1/8" $6.99 US #799-661570
2. flare to pipe adapter (jegs.com)-2 x 3an to 1/8" straight $2.99 US ea. #799-660410
3. brass male pipe nipple (local hardware store)-1/8" $?
4. hyperfirm brake hoses (jegs.com)-3an straight to straight 22"long steal braided hose $12.99 US #361-63010122
5. t fitting with all 1/8" female sides (local hardware store)-$?
also dont forget about 1/8" brass plug for old vtec oil supply hole
all the fittings from jegs here are russell, i used earls because that is what the shop had avaliable at the time
the two parts i have mentioned that you can get at local haredware store i also got at the shop but i believe they were just generic brass fittings


[Modified by Jeff C, 5:08 PM 6/2/2002]

 

is that a big enough braided line (an3??)

hit me back on that as i am trying to put together a kit for my crvtec this next week

thanks

 

Generally accepted size is an-4. Some have used an-6, but others claim it is too big, and the pressure drops too much. I think an-3 might be a bit too small, but I have not tried it myself.

 

yes, that is what i was thinking also