im pretty sure one of u EF dudes have this on. if you guys know what im talkin about. its the mid-wing for 88-91 hatchback goes right on the trunk where the rear windshield wiper is at. i currently dont kno how to post a pic. but here is a ebay picture of it..

http://cgi.ebay.com/ebaymotors/ws/eb...631717&r=0&t=0

i just want to know how to put it on because it doesnt have any holes or brakets for it. it is made of fiber glass.

 

I'm guessing double sided 3M tape...that stuffs pretty damn strong... shoot cwbetb a message..he's got one of these drink holders

 

is it strong enough to hold on if someone were to yank on it? i dont want it to fall off on the freeway! i was wondering do put it on the same way as a body kit?

 

I would think it would have some sort of bolt on. It may have to be drilled.

 

Well, I know the cerivinis wrap around mid-wing bolts on with no drilling, so I would imagine that the wings west one does too.

EDIT: Also you IMO you should jump on that wing, and I would almost swear that it is the wings west one, beacause of the pics and the price the add says it's worth is what WW is charging


[Modified by SlowCivicDX, 12:31 AM 5/23/2002]

 

There's gotta be some way to bolt it on. 3M double sided tape is strong, but not strong enough to hold that on. I'd assume that there are bolt holes in the wing and you'll have to drill through your hatch. I have a WW mid-wing for a Focus at my shop now and there are bolt holes in it, so I'd assume it's the same for the civic.

 

My friend had a jdm style midwing made of fiberglass too...He just took the cover lining from the inside of the hatch and drilled some holes through and bolted the spoilers/wing. Then put the cover back on and wallah...probably took him less than an hour to do.

 

i was thinking about drilling holes. but would it crack? i dont want it to crack and then ill have to fix it up myself..

 

Hey guys it uses 4 bolts and thats it. Its pretty strong, it can hold my gatorade bottle at car shows

 

but my wing didnt come with any hole or bolts. so maybe i should open up the hatch and take the trunk lining and drill holes thru it huh? im just worry if the wing will crack if i drill holes.

hey cwbetb thats a really nice hatch!

 

...and that's all its really good for

 

4G_civic_si thanks for the nice comment.

That is wierd, mine had like threaded holes for it. Is the one you have from Wings West or Mugen? Mugen may be different. I dont think you will have a problem drill through just be careful.

Actually Jason is right the only thing it is good for is holding bottles and food Ah well I like it

 

covers up the D X j/k

 

ITS An SI NOT A DX!!

i purchased it on ebay. its from the link i posted and from that guy. he didnt mention if its a WW or a mugen. its probably generic.. but if there are no holes and no brackets. so i should drill holes? where on the wing shall i drill holes at? 4 holes correct? thanks everyone for info.