Hey guys i just installed a ASR brace with ITR 23MM swaybar and ITR Lower Control Arms on a 96' LS Integra.

Here is the problem. the sway bar hits the lower control arm when the suspension is compressed in any way. When the car is in the air it doesnt hit. Does anyone else have this problem or even have the same or similar set up?

your help would be appreciated. thanks in advance guys.

 

you didnt put the swaybar upside down or anything, did you?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by numbnuts22715 &raquo;</TD></TR><TR><TD CLASS="quote">you didnt put the swaybar upside down or anything, did you?</TD></TR></TABLE>

I'm thinking yes.

The sway bar should not hit the LCA, you did something wrong.

 

post up at least bro. we cant tell you **** at this point.

 

mine fits fine. But I do not have the asr kit. I have the beaks kit.

you put it on upside down, I think

 

did anybody experience seized or broken bolts do the install

 

no response... must have realised it was upside down...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teg_racer &raquo;</TD></TR><TR><TD CLASS="quote">no response... must have realised it was upside down...</TD></TR></TABLE>

Sorry guys my computer at home crashed. So now that im back at work I can reply to the help/advice from you guys. Yes i am an idiot i did mount the sway bar upside down. Nomore working on the car at night in the driveway. lol.........

thanks again for your help guys.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dc2chino &raquo;</TD></TR><TR><TD CLASS="quote">

Sorry guys my computer at home crashed...</TD></TR></TABLE>

Did you install the hard drive upside down too?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CARMA_626 &raquo;</TD></TR><TR><TD CLASS="quote">

Did you install the hard drive upside down too? </TD></TR></TABLE>

Haha. At least his car is fixed.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CARMA_626 &raquo;</TD></TR><TR><TD CLASS="quote">Did you install the hard drive upside down too? </TD></TR></TABLE>

thanks smart ***. lol......... but no i didnt as my computer is just old.

 

Haha That was a good laugh. I'm thinking of getting the same setup. How much did you got each one for?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by soeurm &raquo;</TD></TR><TR><TD CLASS="quote">Haha That was a good laugh. I'm thinking of getting the same setup. How much did you got each one for? </TD></TR></TABLE>

I got the ASR Brace from http://www.passwordjdm.com for $189.
I got the Sway bar from http://www.jdmland.com (ICB Motorsports) for $109 with bushings and D brackets.
I got all new Type-R end links and OEM Acura swaybar collars and bolts from the dealer for the hell of it just to have everything new for $15

Makes a huge difference in how the car feels and bolts up no problem unless you mess up like me. haha........

 

Cool Thanks. I'm looking forward to these purchase. The type r sway bar should also fit on the skunk2 lower control arm too right?

 

The type r sway bar should also fit on the skunk2 lower control arm too right? [/QUOTE]

yes it should fit no problem.

 

Heres a good place to buy the sway bar & bushing.
http://www.carmawerks.com/NewJdmParts.html