Built B20 Bottom End -
Manley Turbo Tuff Rods
Je 9:1 Pistons
Golden Eagle Godzilla Sleeves
New Acl Bearings
New Oil Pump
Arp Head Studs
10an Bung welded on oil pan
All was plastigaged when assembled and all in spec

GSR Head -
Ported and Polished
Manley Valves
Rev Valvesprings and Ti Retainers
Type R cams
Skunk 2 Adj Camgears

Turbo Kit -
Sc6176e(like new with only 500 miles)
Fullrace Prostreet T3 Manifold
3" Dp (scraped a little on Bottom)
Tial 44mm Wg
Tial 50mm BOV
Precision Big IC
2.5" IC alum. pipe from turbo to ic
3" IC alum. pipe from IC to tb
All t bolts and couplers
Victor X intake Manifold
74mm Eriks Racing Tb
All Oil Lines Needed and Fittings
made 317hp on 14 pounds of boost


asking 3500 obo need it gone asap

















Modified by onefastefhatch at 2:12 PM 2/1/2007

 

for got to mention it is a jdm b20z

 

vroom too fast

 

here is the dyno sheet

 

Built B20 Bottom End -
Manley Turbo Tuff Rods
Je 9:1 Pistons
Golden Eagle Godzilla Sleeves
New Acl Bearings
New Oil Pump
Arp Head Studs
10an Bung welded on oil pan
All was plastigaged when assembled and all in spec

GSR Head -
Ported and Polished
Manley Valves
Rev Valvesprings and Ti Retainers
Type R cams
Skunk 2 Adj Camgears

Turbo Kit -
Sc6176e(like new with only 500 miles)
Fullrace Prostreet T3 Manifold
3" Dp (scraped a little on Bottom)
Tial 44mm Wg
Tial 50mm BOV
Precision Big IC
2.5" IC alum. pipe from turbo to ic
3" IC alum. pipe from IC to tb
All t bolts and couplers
Victor X intake Manifold
74mm Eriks Racing Tb
All Oil Lines Needed and Fittings


All this for $3,500?

 

you read right my friend

 

HOLY BOOST BATMAN

Where's my $3500 when I really need it... well, my guess is about $3750 shipped.... common insurance check!!!!!!

 

holy s**t i need this beast

 

Bump for this beast...should rev it higher..it likes to rev.

 

so rad, great price

 

how hard would this be to swap into a 92 cx? never meesed with a b20

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SoHc94 &raquo;</TD></TR><TR><TD CLASS="quote">how hard would this be to swap into a 92 cx? never meesed with a b20</TD></TR></TABLE>
try to refrain from asking question such as this one on Honda-Tech... for a hot *** setup at a good price...

 

damn nice setup great price will sale for sure

 

why refrain. ive nevr done it and just wondered. if i would need to go get axles/different sht/motor mounts etc. like how much AFTer i buy the motor. cuz i have a friend that wants a motor and im putting it in for him. and ive never messed witha b20. any diff from a b18?

 

it is easy as pie to put in if you know how to put in a ls you know how to put in a b20 same concept you dont nedd anything this is a complete swap

 

PM'ed !!

 

all pms answered

 

bump it 3500 shipped

 

good news is looks like i might be able to come up with the money... bad news is that it will not be until the end of next month. I am sure by then it will be long gone. BUT... I will continue to watch this.

for a motor that I want.

 

WHOA WHAT THE expletive DO NOT BUY THIS ****!! THIS IS MY FOR SALE STUFF THIS IS A ****** SCAMMER HERE!!!!!!!!!!!

I REPEAT ****** SCAMMER!!!

 

how odd that he is trying to sell my **** hahah, and rip someone off. mods delete this guy and if i can find out where he is in houston, well then he is one dead expletive..

my ads

https://honda-tech.com/zerothread?id=1859655

https://honda-tech.com/zerothread?id=1867547

dont even think to buy this from the guy.. he is just ripping your *** off obviously

 

Are those pictures of YOUR motor?