FS used darton sleeved 84mm B16 shortblock. crower, je, arp, moroso.
Thread Starter
Mr. Badwrench
Joined: May 2002
Posts: 14,146
Likes: 2
From: stranger in a strange land
FS used darton sleeved 84mm B16 shortblock. crower, je, arp, moroso.
price reduced........1600 + shipping.........
this was the engine 3 years ago before assembly.
i made 520 WHP 313 tq with this engine, and has gone 10.72. (with 4* timming added after the dyno run. and was made with gsr cams.
it was assembled by me, and the machine work was done by Accurate Machine in wilmington delaware. IT WILL NEED TO BE TORN DOWN AND REBUILT!
the players are as follows:
84mm darton mid sleeves installed by accurate machine
84mm 9:1 Je forged pistons
Crower Billet rods (this is the second engine they were in so a rod bolt switch should be taken)
ITR oil pump (stock gears)
std /std b16 crank
o.e. bearings
ARP studs top and bottom, and was line honed.
moroso oil pan.
the block plugs have been removed for the endyn catch can, but the freeze plug will remain.
here is the deal, i have been racing this engine.
i am asking $1600 plus shipping, and since it is used, when purchased, i would want you to go to a reputable machine shop and have it gone over. and if there are any issues with the sleeves, we will work something out. remember, it is 84mm and will need to go over. .5 - 1mm.
pics will be posted as soon as i get the head off.
vouches upon request, pm me any questions.
serious inquiries only. this engine has been good to me, but to make my goals for the season, i have to step up.
Modified by boostedcivicsir at 2:03 PM 2/5/2007
this was the engine 3 years ago before assembly.
i made 520 WHP 313 tq with this engine, and has gone 10.72. (with 4* timming added after the dyno run. and was made with gsr cams.
it was assembled by me, and the machine work was done by Accurate Machine in wilmington delaware. IT WILL NEED TO BE TORN DOWN AND REBUILT!
the players are as follows:
84mm darton mid sleeves installed by accurate machine
84mm 9:1 Je forged pistons
Crower Billet rods (this is the second engine they were in so a rod bolt switch should be taken)
ITR oil pump (stock gears)
std /std b16 crank
o.e. bearings
ARP studs top and bottom, and was line honed.
moroso oil pan.
the block plugs have been removed for the endyn catch can, but the freeze plug will remain.
here is the deal, i have been racing this engine.
i am asking $1600 plus shipping, and since it is used, when purchased, i would want you to go to a reputable machine shop and have it gone over. and if there are any issues with the sleeves, we will work something out. remember, it is 84mm and will need to go over. .5 - 1mm.
pics will be posted as soon as i get the head off.
vouches upon request, pm me any questions.
serious inquiries only. this engine has been good to me, but to make my goals for the season, i have to step up.
Modified by boostedcivicsir at 2:03 PM 2/5/2007
Trending Topics
Thread Starter
Mr. Badwrench
Joined: May 2002
Posts: 14,146
Likes: 2
From: stranger in a strange land
Re: FS used darton sleeved 84mm B16 shortblock. crower, je, arp, moroso. (boostedcivicsir)
out apart and ready to go...........
i am entertaining offers..............
i am entertaining offers..............
Thread
Thread Starter
Forum
Replies
Last Post
RedneckRicer
Mid-West (Sales)
3
Apr 21, 2009 06:35 PM
RedneckRicer
For Sale
2
Apr 21, 2009 05:32 PM
