BSPT to AN oil feed fitting from McMaster
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 4,546
Likes: 0
From: MD
BSPT to AN oil feed fitting from McMaster
Hello-
A LONG time ago I did an oil feed writeup
https://honda-tech.com/zerothread?id=377208
Well, recently I stumbled upon this fitting from McMaster-Carr that is VERY useful.
4545K162
37 Deg Flared Compression Tube Fitting Tube X Male BSPT for 1/4" Tube Od, 1/8" Pipe Size
AKA BSPT - 4AN fitting
Hope this helps people
Seb
A LONG time ago I did an oil feed writeup
https://honda-tech.com/zerothread?id=377208
Well, recently I stumbled upon this fitting from McMaster-Carr that is VERY useful.
4545K162
37 Deg Flared Compression Tube Fitting Tube X Male BSPT for 1/4" Tube Od, 1/8" Pipe Size
AKA BSPT - 4AN fitting
Hope this helps people
Seb
Honda-Tech Member
Joined: Apr 2005
Posts: 566
Likes: 0
Re: BSPT to AN oil feed fitting from McMaster (B18EG6)
Thats close to what I used for my setup when I first went turbo many years ago. I used there brass -4an to 1/8 bspt though.
You should update your first post as well. Also consider adding part #'s for the brass fittings. The steal ones are $$$!
You should update your first post as well. Also consider adding part #'s for the brass fittings. The steal ones are $$$!
Thread
Thread Starter
Forum
Replies
Last Post
