how to put an integra dash in a crx?
Thread Starter
Honda-Tech Member
Joined: Oct 2006
Posts: 6
Likes: 0
From: Oldsmar, fl, United States
So I have heard of people putting acura integra dash into a crx. I was wondering If theres a write up on this or if anyone can tell me how its done. Thanks I am new to this forum as you can tell by the huge newb sign but any help would be greatly appriciated.
There are a few threads floating around here with a lil information on it. Dash is gonna require a bit of trimming and custom mounts will have to be made. also you cannot use your door panels with the setup. Try to search for the few topics floating around
Thread Starter
Honda-Tech Member
Joined: Oct 2006
Posts: 6
Likes: 0
From: Oldsmar, fl, United States
so I would have to get the integra door panels as well? And were should I search? Should I look in the civic & crx faq version 2.0?
https://honda-tech.com/zerothread?id=438732 Here this might help you a lil.
Here are a few pics of what I did. Its secured in the top 2 corners and behind the clock location. Then I built some custom supports that will attach to the roll cage at the knee bar location. Had to trim the back side of the dash where the defrost ducts ran on the sides. This isn't a functional dash, but visual for a road racing track car. Picked up a tan dash with cluster for $20, spent $10 on black vinyl spray, spent about an hour to rewire the cluster and done. Aluminum peices were fabbed up to fill the clock, air bag, and radio/heating/vent opening. I don't have recent pics uploaded yet, but additional gauges and switches are no installed.
Thread Starter
Honda-Tech Member
Joined: Oct 2006
Posts: 6
Likes: 0
From: Oldsmar, fl, United States
That looks good. So did you have to do anything to the steering column at all? I want to do this because I like my crx alot and want to keep it instead of spending money on a newer car. I want to make it look newer aged inside instead of 80's. I wonder what I could do about the doors.
Trending Topics
The steering column was not modified and as far as the doors panels I have no idea how they will look/fit with the stock door panels since i've just got a sheet of aluminum riveted in place.
Just wondering why I can't see the images in this thread... I rly wanna do this swap but can't see anything. Hopefully it's bcuz I'm a new member (i just joined to specifically view these image lol)
Thread
Thread Starter
Forum
Replies
Last Post






