in the process of dsm injector install but they dont want to go in!!!!
Thread Starter
Junior Member
Joined: Apr 2002
Posts: 89
Likes: 0
From: poughkeepsie, ny, u.s
in the process of dsm injector install but they dont want to go in!!!!
i just got my injectors tady and im putting them in right now but the damn things dont wat to fit in the holes of the manifold,, i tried vasoline but no luck do i have to trim the rubber piece they sit in or what..im putting them in my b16 and i want to do the v-afc hack but this is all that is in the way now..need help what should i do ? 
Honda-Tech Member
Joined: Mar 2002
Posts: 2,178
Likes: 1
From: Portland, OR
Re: in the process of dsm injector install but they dont want to go in!!!! (turboedef9)
The little end part of the injectors goes in the seal, but you have to grind it out for it to fit. Grind the inside of the grommet, not the outside! Don't forget the resistors so you don't fry your ECM 
Smarter than you
iTrader: (1)
Joined: Apr 2001
Posts: 8,240
Likes: 2
From: Third Coast, united states
Re: in the process of dsm injector install but they dont want to go in!!!! (ion_four)
The little end part of the injectors goes in the seal, but you have to grind it out for it to fit. Grind the inside of the grommet, not the outside! Don't forget the resistors so you don't fry your ECM
Thread
Thread Starter
Forum
Replies
Last Post
