Yaaahhhh. I got a new fuel filter. Time to go put her on. Look here, 2 bolts...this will be EZ.. Lets go with the 12mm on this one... One turn and she should be loose enough....

<Places socket on bolt>
<Turns>

<Fuel running down engine>

OH F*CKING PIECE OF MOTHERFU*KING SH*T

Oh yeah, that's right, the fuel system is still pressurized.

Anyone wanna help me on this one? What are the required steps to changing my fuel filter?

90 CRX Si
B16a1
(90 CRX Si Fuel Filter)

jB

 

Here you go:



AND




[Modified by 91civic, 5:41 PM 5/2/2002]

 

ahhhhhh.... helms.... the honda bible.

PeloTudo: this is the best investment you can make. Buy one for your car, and buy one for your engine.

 

looks like the regular CRX Service manual.

 

Pretty sure the helms and the service manual are almost identical.

 

how much does the helms cost? i got my service and electrical manual from the library.. i just re-check it out every month

 

I have a Chilton/Haynes for the CRX, but not for the engine. I couldn't find either of them though until about 3.45 seconds ago when I looked under my other stack of books. Oh well. The new fuel filter is in, and works great.

I am moving the MAP sensor down under my intake, just to clean up the upper part of my engine a little. I'll post pics when done with everything.

for the help guys

jB

 

an easy way to depressure your fuel system is remove your gas cap

 

Lol...I know that now. Here is a list of what has been done this evening:

Fuel Filter Changed
Charcoal canister removed
MAP sensor moved under intake (not in sight)
Various vacuum caps applied
Timing retarted a little (Only 2deg advanced now)

Getting ready to take her for the first test run after everything done...Wish me luck

jB