Tips on installing HKS SSQV BOV
#1
New User
Thread Starter
Join Date: Aug 2001
Location: Orlando
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Tips on installing HKS SSQV BOV
I have the HKS SSQ with the flange welded to my UIC piping. I put the gasket in the flange and test fit the BOV but it seems to not be a tight enough fit. Will the metal clip make it fit snug?
#2
Honda-Tech Member
Join Date: Feb 2001
Location: Tejas
Posts: 6,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tips on installing HKS SSQV BOV (Tanabe'd GSR)
yes the metal clips is what hold the BOV in the flange and make it leak proof...
use a special pliers..I forgot what it called....I'll find out in a few....otherwise, good luck, you'll never get the BOV in the flange..
with this pliers, it took me 5 minutes and I have done 2 so far...
use a special pliers..I forgot what it called....I'll find out in a few....otherwise, good luck, you'll never get the BOV in the flange..
with this pliers, it took me 5 minutes and I have done 2 so far...
#3
New User
Join Date: Nov 2000
Location: Tampa, FL, USA
Posts: 3,467
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tips on installing HKS SSQV BOV (Flamenco-T)
you need a set of C clamp pliers, make sure you get the right size, and have some patience. It's a very secure design
#4
Honda-Tech Member
Join Date: May 2001
Location: bay area/socal, CA, USA
Posts: 3,858
Likes: 0
Received 1 Like
on
1 Post
Re: Tips on installing HKS SSQV BOV (VaporTrail)
it took me a half hour to install that damn thing. I used 2 flathead screwdrivers Dont ask me how, just got creative. Make sure to tape the side of the bov so you dont scratch it up in the process.
#6
Honda-Tech Member
Join Date: Oct 2001
Location: some crappy place in, wa, usa
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tips on installing HKS SSQV BOV (Tanabe'd GSR)
You can also take the outer cover off of the BOV, its every other screw on the front . It allows for alot more room to work.
Thread
Thread Starter
Forum
Replies
Last Post