Hey, I was wondering what the difference is between a single bend and dual bend skunk2 shifter.

I can get a good deal on a single bend. So, is it shorter then stock?

Just need some insight, not too sure about the difference of the two.

Thanks

 

dual

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vinai &raquo;</TD></TR><TR><TD CLASS="quote">dual</TD></TR></TABLE>

dual has more of a stock look and feel but a short shifter

the single bends feel a little funny to me

 

the stock integra shifter is dual bend, so get that one. the single bend will put the shifter very lose to the console when in 1st, 3rd, and 5th. civics come with a single bend.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fistandauntilus &raquo;</TD></TR><TR><TD CLASS="quote">the stock integra shifter is dual bend, so get that one. the single bend will put the shifter very lose to the console when in 1st, 3rd, and 5th. civics come with a single bend.</TD></TR></TABLE>

ya dual for integra

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Arai &raquo;</TD></TR><TR><TD CLASS="quote">

ya dual for integra</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fistandauntilus &raquo;</TD></TR><TR><TD CLASS="quote">the stock integra shifter is dual bend, so get that one. the single bend will put the shifter very lose to the console when in 1st, 3rd, and 5th. civics come with a single bend.</TD></TR></TABLE>


I run a single bend in my Teg(skunk2) and its not close to the console at all.

 

the dual bend

 

Good enough.

Thanks gentlemen

 

Should I get the polyurethane bushings for that too, or is the skunk2 ones fine?

Just daily driving......

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Asselin &raquo;</TD></TR><TR><TD CLASS="quote">Should I get the polyurethane bushings for that too, or is the skunk2 ones fine?

Just daily driving......</TD></TR></TABLE>


The S2 shifter has a bearing not a bushing but yes get the bushing set for the stabalizer bar.

 

hey difinetly get the stabilizer bars

 

Thanks for all the replies.

I ordered the dual bend skunk2 shifter + **** and the ES bushings for the stabalizer bar.

 

good ****. you will love the feel with the bushings and short shifter