Hey i was wondering if anybody has found out if the front and or back seats from the new 06 si coupe will fit into my 99 si coupe. Just wondering because i really like the seats alot. Thanks for all your input guys.

 

up ttt anybody

 

sorry for crappy camera








I cut off all the brackets from the stock dx rails - then positioned them back in the car & connected the front 2 brackets with 1/16X1 weld steel...then did the same connecting the the rear 2 brackets. then cut off the brackets on '06 si seats (so bottom of rails where flat) & welded the rails to the weld steel

pic of custom bracket...


in the pic above you can see one little tack weld which was made with the seats in the car...the seats were then removed (with brackets attached) & thoroughly welded

cliffs - weld stock dx brackets to steel bars - then weld steel bars to bottom of '06 si rails

stock dx vs si pics


sitting at stock height too (maybe 1" lower)

 

Thats awesome! I'd love to have those!
(edit: because i wanted to give you one of these )

 

niceeeee

 

anybody know about the fitment of the rear seats?

 

do you think its possible to just install them like S2000, EP, and RSX seats? just swap the seat pans. seems easier to me if its possible. don't have to cut and weld stuff.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skip.two &raquo;</TD></TR><TR><TD CLASS="quote">do you think its possible to just install them like S2000, EP, and RSX seats? just swap the seat pans. seems easier to me if its possible. don't have to cut and weld stuff.</TD></TR></TABLE>

thats a negative on the seat pan swap looked into that...

 

those seats look good

 

Looks like they sit somewhat high but nonethless clean seats

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _adirondackR_ &raquo;</TD></TR><TR><TD CLASS="quote">thats a negative on the seat pan swap looked into that...</TD></TR></TABLE>
damn .. well the seats look good

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skip.two &raquo;</TD></TR><TR><TD CLASS="quote">
damn .. well the seats look good </TD></TR></TABLE>

thank you...will have to get a better camera tho

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EkSi &raquo;</TD></TR><TR><TD CLASS="quote">Looks like they sit somewhat high but nonethless clean seats </TD></TR></TABLE>

the backs of the seats are much bigger & slightly taller...you actaully sit slightly lower than stock