Brewer Pics: My H22 Hatch, Dyno Chart, 9 Pics
Thread Starter
Honda-Tech Member
Joined: Sep 2001
Posts: 1,022
Likes: 0
From: Birmingham, Alabama, USA
Well, here it is. What you've all been waiting for. This is my baby, I have put everything I have into this car and I belive it has turned out just the way I want it. Mad props to Brewer for the shoot, and also Jim at Motorvations, and everyone in dAng! for there support. If it wasn't for my friends, this car wouldn't be where it is today!!!
<FONT SIZE="4">Updated pics of the exhaust on page 7</FONT>
<FONT SIZE="4">New pics added to page 8</FONT>
<FONT SIZE="4">New pics added to page 11</FONT>
Enjoy!!!!!
SORRY, PICS REMOVED CAUSE THEY WERE OLD!!!
Engine & Transmission
JDM H22A, Crower Stage 3 Cams (316 Duration), Ferrea Valvetrain, Mahle 11.5/1 Pistons, Crower Max Light Rods, Micropolished and Balanced Honda Crank, STR Throttle Body, AEM Fuel Rail, B&M Fuel Pressure Regulator, RC 440cc Injectors, Fidanza Cam Gears, <U>Motorvations</U> Cam Seal, Hytech Tri-Y Custom Header (2.5in Collector), K-Teller Exhaust Piping with Magnaflow Resonator, and ES Oval Muffler (All 2.5in) with custom turn down tip by <U>Morgan Fabrications</U>, Cusco Oil Catch Can, Fluidyne Radiator with FAL Fan, Unorthodox Race Crank Pulley, Fidanza Flywheel, ACT Xtreme Pressure Plate with 6-Puck Unsprung Race Disc, Hondata S200 (Jim Helbing of <U>Motorvations</U> Tuned)
Exterior
Paint by Jonathan Goolsby at <U>Goolsby Custom and Collision</U>, Seibon Carbon Fiber Hood, VIS Carbon Fiber Front Lip, Vision Carbon Fiber Mirrors, Spoon Carbon Fiber Wing, TYC Headlights, McCullough HID’s (10,000k), Amber Corners, Honda Fog Lights, ‘99 Civic Side skirts, Vision Hood Damper’s
Interior
USDM Recaro SRD’s, Momo Tuner Steering Wheel, NRG Short Hub and G2 Quick Release, Civic SIR Gauge Cluster, ITR Shift Boot, Spoon Shift ****, Mugen Pedals
Wheels, Suspension, and Brakes
Enkei RPF1’s 16x7 with Nitto Neo Gen’s (205-45-16), Integra GSR Front Brakes, Brembo Rotors, Axxis Metal Master Brake Pads, Skunk 2 Extended Studs, Kyokugen Lug Nuts, Spoon Sports Rear Upper and Lower Tie Bars, CTR Front Upper Tie Bar, Omnipower Full Bodied Coilovers, Omnipower Rear Lower Control Arms
Modified by H22PwrdHatch at 11:52 AM 4/23/2006
Modified by H22PwrdHatch at 11:53 AM 4/23/2006
Modified by H22PwrdHatch at 11:53 AM 4/23/2006
Modified by H22PwrdHatch at 4:34 PM 5/24/2006
Modified by H22PwrdHatch at 1:54 PM 2/26/2007
Modified by H22PwrdHatch at 4:36 PM 2/26/2007
Modified by H22PwrdHatch at 4:38 PM 2/26/2007
Modified by H22PwrdHatch at 4:40 PM 2/26/2007
Modified by H22PwrdHatch at 11:38 AM 8/24/2007
<FONT SIZE="4">Updated pics of the exhaust on page 7</FONT>
<FONT SIZE="4">New pics added to page 8</FONT>
<FONT SIZE="4">New pics added to page 11</FONT>
Enjoy!!!!!
SORRY, PICS REMOVED CAUSE THEY WERE OLD!!!
Engine & Transmission
JDM H22A, Crower Stage 3 Cams (316 Duration), Ferrea Valvetrain, Mahle 11.5/1 Pistons, Crower Max Light Rods, Micropolished and Balanced Honda Crank, STR Throttle Body, AEM Fuel Rail, B&M Fuel Pressure Regulator, RC 440cc Injectors, Fidanza Cam Gears, <U>Motorvations</U> Cam Seal, Hytech Tri-Y Custom Header (2.5in Collector), K-Teller Exhaust Piping with Magnaflow Resonator, and ES Oval Muffler (All 2.5in) with custom turn down tip by <U>Morgan Fabrications</U>, Cusco Oil Catch Can, Fluidyne Radiator with FAL Fan, Unorthodox Race Crank Pulley, Fidanza Flywheel, ACT Xtreme Pressure Plate with 6-Puck Unsprung Race Disc, Hondata S200 (Jim Helbing of <U>Motorvations</U> Tuned)
Exterior
Paint by Jonathan Goolsby at <U>Goolsby Custom and Collision</U>, Seibon Carbon Fiber Hood, VIS Carbon Fiber Front Lip, Vision Carbon Fiber Mirrors, Spoon Carbon Fiber Wing, TYC Headlights, McCullough HID’s (10,000k), Amber Corners, Honda Fog Lights, ‘99 Civic Side skirts, Vision Hood Damper’s
Interior
USDM Recaro SRD’s, Momo Tuner Steering Wheel, NRG Short Hub and G2 Quick Release, Civic SIR Gauge Cluster, ITR Shift Boot, Spoon Shift ****, Mugen Pedals
Wheels, Suspension, and Brakes
Enkei RPF1’s 16x7 with Nitto Neo Gen’s (205-45-16), Integra GSR Front Brakes, Brembo Rotors, Axxis Metal Master Brake Pads, Skunk 2 Extended Studs, Kyokugen Lug Nuts, Spoon Sports Rear Upper and Lower Tie Bars, CTR Front Upper Tie Bar, Omnipower Full Bodied Coilovers, Omnipower Rear Lower Control Arms
Modified by H22PwrdHatch at 11:52 AM 4/23/2006
Modified by H22PwrdHatch at 11:53 AM 4/23/2006
Modified by H22PwrdHatch at 11:53 AM 4/23/2006
Modified by H22PwrdHatch at 4:34 PM 5/24/2006
Modified by H22PwrdHatch at 1:54 PM 2/26/2007
Modified by H22PwrdHatch at 4:36 PM 2/26/2007
Modified by H22PwrdHatch at 4:38 PM 2/26/2007
Modified by H22PwrdHatch at 4:40 PM 2/26/2007
Modified by H22PwrdHatch at 11:38 AM 8/24/2007
Trending Topics
Dayum very nice. me likey alot..
i hope you have some anti-theft devices and kill switches because id hate to see all the hard work go to waste.
i hope you have some anti-theft devices and kill switches because id hate to see all the hard work go to waste.
Thread Starter
Honda-Tech Member
Joined: Sep 2001
Posts: 1,022
Likes: 0
From: Birmingham, Alabama, USA
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stick »</TD></TR><TR><TD CLASS="quote">Dayum very nice. me likey alot..
i hope you have some anti-theft devices and kill switches because id hate to see all the hard work go to waste.
</TD></TR></TABLE>
What is that?...We no need no stinkin' anti-theft!!
i hope you have some anti-theft devices and kill switches because id hate to see all the hard work go to waste.
</TD></TR></TABLE>
What is that?...We no need no stinkin' anti-theft!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMDan »</TD></TR><TR><TD CLASS="quote">dAng! roadtrip to MD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !</TD></TR></TABLE>
Make a nice meet and we're THERE. Make sure all the MD heads come (Ecahatch, lazybrown, that one guy that started the BC spec2 thread, Kay_animation...etc) and of course your crew.
Make a nice meet and we're THERE. Make sure all the MD heads come (Ecahatch, lazybrown, that one guy that started the BC spec2 thread, Kay_animation...etc) and of course your crew.
im working on it seriously, me and jeff are looking for a place to host it and were good
party at my house! my mom will prolly kill me
party at my house! my mom will prolly kill me
Joined: Dec 2004
Posts: 5,527
Likes: 8
From: where it rains 24/7 stay away...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by illvizion »</TD></TR><TR><TD CLASS="quote">dope! great work
</TD></TR></TABLE>
</TD></TR></TABLE>




