b16 red valve cover
Thread Starter
Honda-Tech Member
Joined: Sep 2004
Posts: 1,610
Likes: 1
From: Some where in, WA, USA
b16 red valve cover
Its a b16 valve cover that I got off of my jdm b16a head. I swaped for a type R cover after i painted this one red. I stripped off the black and put a few coats of red wrinkle paint on it. Over all it lookes pretty bad ***. Here are a few pictures of it from the top in my engine and from the side. Im selling it for $55. 
Trending Topics
Honda-Tech Member
Joined: Feb 2004
Posts: 8,706
Likes: 0
From: Ft. Laud to Miami, FL
Re: (jakscivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jakscivic »</TD></TR><TR><TD CLASS="quote">la la la la la la la </TD></TR></TABLE>
free bump for some nice work. i would buy, but ima try to do my own. plus i cant expletive up because its been ricer cut for cam gear tuning when it has stock cams.
free bump for some nice work. i would buy, but ima try to do my own. plus i cant expletive up because its been ricer cut for cam gear tuning when it has stock cams.
Thread Starter
Honda-Tech Member
Joined: Sep 2004
Posts: 1,610
Likes: 1
From: Some where in, WA, USA
just to let you know and give any advice. I used the air craft paint remover to get the stock paint off. Let it dry. Then i taped off my letters, oil hole, spark plug holes, and any place bolts went. Then put a few coats of Krylon Wrinkle Finish (paint) on it and let it dry for a few days. I did this to another one and after just a few hours it still felt a little went and the paint felt like rubber and it moved. Then pull off the tape. I used an exacto knife to scrape away any paint where i didnt want it.
Thread
Thread Starter
Forum
Replies
Last Post
skylinecx1212
Northern California (Sales)
6
Feb 13, 2013 07:29 PM
