JDM Integra(RSX) Type R Steering Wheel with SRS in a 99 Civic SI - !!!!!!!!!!!!!!!
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2002
Posts: 237
Likes: 0
From: Atlanta, GA
Hey ALL
Well I just did it!~!!!!
I installed a JDM Integra(RSX) Type R MOMO Steering Wheel.
This is a wheel from the new Type R Integra in Japan.
It is a momo Wheel. I've had this thing for about 3 months now and been
wondering if it would even fit.
Well it does ..
Check out the pics.
Let me know what everyone thinks.
DK
[Modified by darkknightwong, 12:43 PM 4/5/2002]
[Modified by darkknightwong, 3:33 PM 9/11/2002]
Well I just did it!~!!!!
I installed a JDM Integra(RSX) Type R MOMO Steering Wheel.
This is a wheel from the new Type R Integra in Japan.
It is a momo Wheel. I've had this thing for about 3 months now and been
wondering if it would even fit.
Well it does ..
Check out the pics.
Let me know what everyone thinks.
DK
[Modified by darkknightwong, 12:43 PM 4/5/2002]
[Modified by darkknightwong, 3:33 PM 9/11/2002]
pics were not working correctly so i fixed them for you.. that steering wheel is badass.. i dont think it would fit onto a 5gen civic or i might want to take on off your hands.. ill wait and get my swap then more little goodies.. does the srs light and everything come on correclty? and what about a horn is there one??
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2002
Posts: 237
Likes: 0
From: Atlanta, GA
Everything works..
The SRS works .. NO LIGHT..
The horn works.
the whole cetner piece is the horn too!!
Thanks!!
DK
The SRS works .. NO LIGHT..
The horn works.
the whole cetner piece is the horn too!!
Thanks!!
DK
The steering wheel looks very nice in the car, when I had my Si I also wanted a different looking wheel...
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2002
Posts: 237
Likes: 0
From: Atlanta, GA
Thanks Everyone!!!!!!
I just need to do the rest of the mods I want!!
I just need to do the rest of the mods I want!!
r those ITR racing seats. if so how much did u get them for? and how much are u selling the steering wheel for
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2002
Posts: 237
Likes: 0
From: Atlanta, GA
The seats are USDM ITR Seats...
DK
[Modified by darkknightwong, 4:34 AM 4/1/2002]
[Modified by darkknightwong, 1:03 PM 9/12/2002]
DK
[Modified by darkknightwong, 4:34 AM 4/1/2002]
[Modified by darkknightwong, 1:03 PM 9/12/2002]
r those ITR seats. if so how much did u get them for? and how much are u selling the steering wheel for
[Modified by HassanSI2K, 4:33 AM 4/1/2002]
[Modified by HassanSI2K, 4:33 AM 4/1/2002]
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2002
Posts: 237
Likes: 0
From: Atlanta, GA
sorry for the double post
[Modified by DxHatchback, 6:00 AM 4/1/2002]
[Modified by DxHatchback, 6:00 AM 4/1/2002]
Hey that steering wheel looks nice! Where did you get it from? Is that one bigger than the one in the Si, because I have the same car and that steering wheel looks a little bigger.
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2002
Posts: 237
Likes: 0
From: Atlanta, GA
Hey All..
The wheels was just bolt up. Very easy to do. Took me like 10 min.
I think longer worrying about blowing the SRS
But it all worked good.
This wheel is alot smaller then the stock SI wheel.
It is also a lot lighter
I had both wheels apart and wow I could not believe how light the momo one was.
I like it so far!!!
I got both of them over the net back in November of 2001.
Just have not had a chance to put it on.....
Thanks
DK
[Modified by darkknightwong, 12:37 PM 4/1/2002]
The wheels was just bolt up. Very easy to do. Took me like 10 min.
I think longer worrying about blowing the SRS

But it all worked good.
This wheel is alot smaller then the stock SI wheel.
It is also a lot lighter
I had both wheels apart and wow I could not believe how light the momo one was.
I like it so far!!!
I got both of them over the net back in November of 2001.
Just have not had a chance to put it on.....
Thanks
DK
[Modified by darkknightwong, 12:37 PM 4/1/2002]
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2002
Posts: 237
Likes: 0
From: Atlanta, GA
I cant help it..
I was scared to death working with the SRS..
heheheheheheh
Its all good
See Trey.. you need to buy my other wheel I have for sale

I was scared to death working with the SRS..
heheheheheheh
Its all good
See Trey.. you need to buy my other wheel I have for sale

Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2002
Posts: 237
Likes: 0
From: Atlanta, GA
The JDM one is a momo one..
it says momo on the bottom spoke.
It is about 1 inch to 1 1/2 inches smaller then the stock SI wheel
it says momo on the bottom spoke.
It is about 1 inch to 1 1/2 inches smaller then the stock SI wheel
WOW that looks so nice.
is the momo wheel any smaller in diameter?
is the momo wheel any smaller in diameter?





