FS: CA: 97 honda civic EK, 2.0 all motor clean!!!!!!!! PICSSSS *CHEAP*
Thread Starter
Junior Member
Joined: Oct 2004
Posts: 541
Likes: 0
From: Laguna Niguel, ca, USA
FS: CA: 97 honda civic EK, 2.0 all motor clean!!!!!!!! PICSSSS *CHEAP*
SOLDDDDDDDDDDDDDDDDD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!! 
This is a relist from about a month ago, sold the rotas and dropped the price alot..........
Well it is time to move on from my project, i was almost finished, and then money just started to become a factor, so whoever gets her, will be getting a well started project. bla bla, on to the good stuff....
97 civic coupe
100xxx on the chasis
exterior:
full 99 oem front end
99 civic hood
99 jdm fenders w/ sidemarker
99 oem front bumper
99 oem si front lip
99 oem si grill
99 si tail lights
99 oem si headlights
body is painted bmw m5 ANTHRACITE ( if you have never seen this color, it is awesome)
spoon style mirrors
suspension:
kyb agx's (4 way front, 8 way rear)
eibach sport springs
rear strut tower bar
rollin on stock 99 civic steelies with snap ons
interior:
pretty much stock except for...
Si front seats
and pioneer cd player, mp3 player
now for the goods
engine:
b18 block
darton iron ductile sleeves (500 hp +)
bored to 85 mm
je 11.5:1 pistons
stock b20 rods shot peened
gsr transmission
jun lightweight flywheel
exedy 6 puck clutch
cometic 3 layer metal head gasket
b16 head
port and polished
toda valvesprings
toda cam sprockets
toda spec b cams
integra type r intake manifold
b16 throttle body
rc 310 injectors
short ram intake
dc headers 4 to 1
no cat 2.5 inch piping back to a black es oval muffler
hondata s100
p28 ecu
dynoed at 205/150
it has more potential, but the header and the throttle body are restricting the air flow....... i was planning on going boost because it has sleeves and would hold up, but funds are limited so im selling.
I am the second owner of the car, ive had it for 4 years, its very clean!
The engine only has 5 oil changes on it, so like 15000 miles, it runs perfect, was built proffesionaly by wicked garage up in garden grove, if you wanna come check the car out i live in southern orange county california. im ready to sell this thing. So first decent offer takes her home.
PRICE DROP!!!!! -700$ now: 7800 obo NEED TO SELL
i have parts to:
stock 97 civic manual mirrors obo
obd2 gsr injectors
mugen radiator cap
obd2a-1 conversion harness
Thread -----> https://honda-tech.com/zerothread?id=1514215
QUESTIONS: Davidmedve@Hotmail.com, or pm me
(949) 306 5998 If your serious
BUMP ME PLEEZ, I NEEDS THIS SOLD !
Looks same as in these pics except its on stock 99 civic steelies with snap ons, it actually goes well toegether. SLEEPER!!!
*PEOPLE JUST FOR YOUR INFORMATION, 8000 DOLLARS IS ABOUT HOW MUCH THE ENGINE IN THIS CAR WOULD COST TO BUILD, TAKE THAT INTO ACCOUNT, AND BUY THIS ****, COME UP ON MY LOSS*
Modified by b20todaej6 at 11:07 AM 2/18/2006
Modified by b20todaej6 at 11:09 AM 2/18/2006
Modified by b20todaej6 at 10:40 PM 4/6/2006
This is a relist from about a month ago, sold the rotas and dropped the price alot..........
Well it is time to move on from my project, i was almost finished, and then money just started to become a factor, so whoever gets her, will be getting a well started project. bla bla, on to the good stuff....
97 civic coupe
100xxx on the chasis
exterior:
full 99 oem front end
99 civic hood
99 jdm fenders w/ sidemarker
99 oem front bumper
99 oem si front lip
99 oem si grill
99 si tail lights
99 oem si headlights
body is painted bmw m5 ANTHRACITE ( if you have never seen this color, it is awesome)
spoon style mirrors
suspension:
kyb agx's (4 way front, 8 way rear)
eibach sport springs
rear strut tower bar
rollin on stock 99 civic steelies with snap ons
interior:
pretty much stock except for...
Si front seats
and pioneer cd player, mp3 player
now for the goods
engine:
b18 block
darton iron ductile sleeves (500 hp +)
bored to 85 mm
je 11.5:1 pistons
stock b20 rods shot peened
gsr transmission
jun lightweight flywheel
exedy 6 puck clutch
cometic 3 layer metal head gasket
b16 head
port and polished
toda valvesprings
toda cam sprockets
toda spec b cams
integra type r intake manifold
b16 throttle body
rc 310 injectors
short ram intake
dc headers 4 to 1
no cat 2.5 inch piping back to a black es oval muffler
hondata s100
p28 ecu
dynoed at 205/150
it has more potential, but the header and the throttle body are restricting the air flow....... i was planning on going boost because it has sleeves and would hold up, but funds are limited so im selling.
I am the second owner of the car, ive had it for 4 years, its very clean!
The engine only has 5 oil changes on it, so like 15000 miles, it runs perfect, was built proffesionaly by wicked garage up in garden grove, if you wanna come check the car out i live in southern orange county california. im ready to sell this thing. So first decent offer takes her home.
PRICE DROP!!!!! -700$ now: 7800 obo NEED TO SELL
i have parts to:
stock 97 civic manual mirrors obo
obd2 gsr injectors
mugen radiator cap
obd2a-1 conversion harness
Thread -----> https://honda-tech.com/zerothread?id=1514215
QUESTIONS: Davidmedve@Hotmail.com, or pm me
(949) 306 5998 If your serious
BUMP ME PLEEZ, I NEEDS THIS SOLD !
Looks same as in these pics except its on stock 99 civic steelies with snap ons, it actually goes well toegether. SLEEPER!!!
*PEOPLE JUST FOR YOUR INFORMATION, 8000 DOLLARS IS ABOUT HOW MUCH THE ENGINE IN THIS CAR WOULD COST TO BUILD, TAKE THAT INTO ACCOUNT, AND BUY THIS ****, COME UP ON MY LOSS*
Modified by b20todaej6 at 11:07 AM 2/18/2006
Modified by b20todaej6 at 11:09 AM 2/18/2006
Modified by b20todaej6 at 10:40 PM 4/6/2006
Trending Topics
Thread Starter
Junior Member
Joined: Oct 2004
Posts: 541
Likes: 0
From: Laguna Niguel, ca, USA
sorry man gotta sell, nice hatchie tho, ive always loved the eg's, the only trade id be interested in is a beater plus a decent amount of cash to make up for the difference. BUMP!!! ill let you know if i change my mind. !@ midnight bump
