yes or no? thanks

 

i'm curious to know this as well.

 

lol i need to know also.

 

so much for the quick question part, lol

 

IIRC you can't. I remember seeing a thread about this roughly 3 months ago. I think the answer was no without some modification.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso (11:03 AM 1/4/2006): &raquo;</TD></TR><TR><TD CLASS="quote"> Duz not fit wif out modifitcations, You would be better off getting the correct one for your needs. Less chance of it getting rizipped out by the wheel and causing damage to the fender.</TD></TR></TABLE>

^had to quote him via pm because he was restricted to 5 posts a day

 

They will fit, I've seen it done on a friends conversion, it basically bolted up without a problem.

 

need quick modifications to the liner

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM Factor &raquo;</TD></TR><TR><TD CLASS="quote">They will fit, I've seen it done on a friends conversion, it basically bolted up without a problem.</TD></TR></TABLE>

you need to make some cuts to make it fit properly. i just ordered jdm ones through password jdm

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nishant &raquo;</TD></TR><TR><TD CLASS="quote">you need to make some cuts to make it fit properly. i just ordered jdm ones through password jdm</TD></TR></TABLE>

how much did that run you and does it come with the hardware to mount it?

 

I never cut mine and they fit.

 

besides the fenders, what about the tray under the header?

 

The JDM ones are the same as the USDM ones. The only difference is that there is a cut in the JDM ones. I used to have pics of it posted but no longer. The USDM ones have the scribe line to cut it and it is near where the bumper meets the fender. Sorry I don't have pics.