can a +40 offset fit?
Are you talking about your wheel being ?? x 6 because I don't understand the 4x6x100. Regardless, it will fit w/o any problems. But that's only assuming your wheel is ?? x 6 with a 4x100 lug pattern on a +40 offset.
yeah. 14 inch diameter, 6 inch wide, 4x100 lug pattern, +40 offset.
Are the wheels going to stick out a little nicely or go further inside the wheel well kinda ugly, compared to the original 14 inch steelies with 4x100 lug pattern, 5.5 inch wide (don't know the offset)?
Modified by wytiak3 at 6:43 PM 1/4/2006
Are the wheels going to stick out a little nicely or go further inside the wheel well kinda ugly, compared to the original 14 inch steelies with 4x100 lug pattern, 5.5 inch wide (don't know the offset)?
Modified by wytiak3 at 6:43 PM 1/4/2006
higher numerical offset moves the wheel closer to the center of the car, but it is also reletive to the wheel's width. so depending on what offset your steelies were, the new wheels may or may not stick out a little farther because they are 1/2 an inch wider. more than likely, they will be about the same.
Thread
Thread Starter
Forum
Replies
Last Post
RacerBoy
Honda CRX / EF Civic (1988 - 1991)
8
Dec 9, 2002 04:43 AM




