What size wrench should I use for:

Reply Subscribe

Thread Tools

Search this Thread

Dec 13, 2005 | 10:51 AM

pentaq

Thread Starter

Honda-Tech Member

Joined: Apr 2002

Posts: 1,667

Likes: 0

From: Szczecin, Poland

What size wrench should I use for:

an oil cooler nut and an oil pressure sensor?
H22 of course...

Metric please

Thanks

Dec 13, 2005 | 10:56 AM

Eddiebx

Member

Joined: May 2002

Posts: 3,109

Likes: 3

Dec 13, 2005 | 10:57 AM

pentaq

Thread Starter

Honda-Tech Member

Joined: Apr 2002

Posts: 1,667

Likes: 0

From: Szczecin, Poland

Re: (Eddiebx)

too small

besides this wrench is not precise and nut is sticking a bit only, so I don't want to strip it.

Dec 13, 2005 | 11:00 AM

kulrevon

Honda-Tech Member

Joined: Jun 2003

Posts: 1,679

Likes: 0

From: westchester or philly, ny

Re: (Eddiebx)

I could be way off. but 22mm comes to mind. 28?

edit see I was way off. the second one was a little closer.

Modified by kulrevon at 3:20 PM 12/13/2005

Dec 13, 2005 | 11:18 AM

Rosko

Honda-Tech Member

iTrader: (1)

Joined: Apr 2004

Posts: 2,876

Likes: 3

From: Burnout Box, IA, U.S.A.

Re: (kulrevon)

Its 30mm (oil cooler). I just measured mine to be sure. Make sure you get a deep socket. I used an axle nut socket cuz they are fairly cheap and available at most parts stores.

My pressure sensor is a 24mm and the base it screws into is 26mm

Dec 13, 2005 | 11:45 AM

pentaq

Thread Starter

Honda-Tech Member

Joined: Apr 2002

Posts: 1,667

Likes: 0

From: Szczecin, Poland

Re: (Rosko)

Thanks a lot.

Dec 13, 2005 | 08:33 PM

mgags7

Honda-Tech Member

Joined: Mar 2004

Posts: 15,050

Likes: 3

Re: (Eddiebx)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eddiebx »</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

oh the mexican socket set....dammmmmmm

good info dude....

What size wrench should I use for:

What size wrench should I use for:

Trending Topics