Just picked up a 97 ek ex and a H22 swap and got some questions?
Member
Joined: Dec 2003
Posts: 4,326
Likes: 3
From: Respek my Fresh
Re: Just picked up a 97 ek ex and a H22 swap and got some questions? (spoink)
which axles do you have? the correct axles depend on the motor mount kit you use. I would recommend HCP or Hasport mounts, but make sure they'll work with your axles. You may also want to replace your plugs, wires, dizzy cap and rotor too. Definitely do the manual tensioner conversion 
. My stock radiator worked fine in my swap (d16b5 stock radiator), but if you want to replace it, get a del sol vtec radiator. I got a clutch masters stage 1 clutch for my DD h22 eg. In retrospect, I would have gone stage 2, but no more than that. Good luck, and try the hybrid forum for the more specific questions in the future, you'll get better responses there.
. My stock radiator worked fine in my swap (d16b5 stock radiator), but if you want to replace it, get a del sol vtec radiator. I got a clutch masters stage 1 clutch for my DD h22 eg. In retrospect, I would have gone stage 2, but no more than that. Good luck, and try the hybrid forum for the more specific questions in the future, you'll get better responses there.
Thread Starter
Honda-Tech Member
Joined: Jan 2003
Posts: 341
Likes: 0
From: Daytona Beach, FL, U.S. of A.
Re: Just picked up a 97 ek ex and a H22 swap and got some questions? (sicky)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sicky »</TD></TR><TR><TD CLASS="quote">FYI it's an EJ8, not an EK</TD></TR></TABLE>
Thanks for the clarification. I am a noob to the newer stuff, I also have an eg4
Modified by spoink at 11:39 AM 11/15/2005
Thanks for the clarification. I am a noob to the newer stuff, I also have an eg4
Modified by spoink at 11:39 AM 11/15/2005
Thread Starter
Honda-Tech Member
Joined: Jan 2003
Posts: 341
Likes: 0
From: Daytona Beach, FL, U.S. of A.
Re: Just picked up a 97 ek ex and a H22 swap and got some questions? (IHateJDM)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IHateJDM »</TD></TR><TR><TD CLASS="quote">which axles do you have? the correct axles depend on the motor mount kit you use. I would recommend HCP or Hasport mounts, but make sure they'll work with your axles. You may also want to replace your plugs, wires, dizzy cap and rotor too. Definitely do the manual tensioner conversion . My stock radiator worked fine in my swap (d16b5 stock radiator), but if you want to replace it, get a del sol vtec radiator. I got a clutch masters stage 1 clutch for my DD h22 eg. In retrospect, I would have gone stage 2, but no more than that. Good luck, and try the hybrid forum for the more specific questions in the future, you'll get better responses there.</TD></TR></TABLE>
As far as the axles go I have a 90 Accord intermediate Shaft, and 92 Integra half Shaft right. Any suggestions for mounts for these axles?
. My stock radiator worked fine in my swap (d16b5 stock radiator), but if you want to replace it, get a del sol vtec radiator. I got a clutch masters stage 1 clutch for my DD h22 eg. In retrospect, I would have gone stage 2, but no more than that. Good luck, and try the hybrid forum for the more specific questions in the future, you'll get better responses there.</TD></TR></TABLE>As far as the axles go I have a 90 Accord intermediate Shaft, and 92 Integra half Shaft right. Any suggestions for mounts for these axles?
Thread
Thread Starter
Forum
Replies
Last Post
Ddogz15
Hybrid / Engine Swaps
10
Nov 17, 2003 09:24 PM
