has anyone use crower s2 in there ITR,what do you think?

 

a friend of mine had them, both he and i were less than impressed.

i'd take a look at the BC stage III+'s, or Toda spec b's, depending on your budget.

 

I ran Crower Stage 2's on my ITR and I was pleased with them. I then changed to Toda Spec C's on the exact same setup and lost power across the entire power band. I'll see if I can find the dyno plots, they were done at P1 and tuned by Jack.

 

I <3 MY CROWERS(63413-2).... bc3+ are not on the same level as crower stage 2's...choosing a cam is mostly about where you want to make power...each brand cam has a different goal for powerband in mind

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bradstard &raquo;</TD></TR><TR><TD CLASS="quote">I ran Crower Stage 2's on my ITR and I was pleased with them. I then changed to Toda Spec C's on the exact same setup and lost power across the entire power band. I'll see if I can find the dyno plots, they were done at P1 and tuned by Jack.</TD></TR></TABLE>

I hope you do...Dont know why there a lot of hating on crower

 

i am looking around the buddy spec 3 dont seen to bad.The crowers power curve looks like the type-r cams

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hytec &raquo;</TD></TR><TR><TD CLASS="quote">has anyone use crower s2 in there ITR,what do you think?</TD></TR></TABLE>
I think that there are better cams out there.

 

Here's my old thread....

https://honda-tech.com/zerothread?id=956740

This was on P1's Mustang Dyno.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bradstard &raquo;</TD></TR><TR><TD CLASS="quote">Here's my old thread....

https://honda-tech.com/zerothread?id=956740

This was on P1's Mustang Dyno.

</TD></TR></TABLE>

I'm not terribly surprised the C's made less power than the Crowers on your setup. Don't the Spec C's pretty much need bumped compression to make respectable gains?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xjohnx &raquo;</TD></TR><TR><TD CLASS="quote">I'm not terribly surprised the C's made less power than the Crowers on your setup. Don't the Spec C's pretty much need bumped compression to make respectable gains?</TD></TR></TABLE>
C's also make power pretty high. Peak at 8700 on my motor, and carry power well past 9,000. Bradstards motor was being shut down at 8,200.

 

yeah the C's look like they are still climing when it was shut down the crowers started to flatten out