I have 99 Civic CX with a D16Y7 motor and recieved a Z6 head from a friend i was just wondering what else i needed to run this obd-1 vtec head on my obd-2 non-vtec block (ecu, harness, intake mani., exhaust main., etc...) i plan on turbocharging this motor after x-mas. any help would be needed.
p.s. i have already searched this site as well as many many others

 

nothing? !BUMP! i really need some help on this

 

BUMP!!

 

search mini-me, i think bauleycivic did a write up on it, goodluck

 

don't give up searching, I've got a 96 y7, and a z6 head sitting around, and have been keeping on eye on threads coming and going, I know it is covered and I have talked to guys who have done it, most guys will tell you to use the y8 head, easier.... I don't have any search clues for ya, but if you look around enough you'll find what you're looking for

 

thanks for the advice, ill just keep on searching around for tips on the subject, but if any of ya'll have any information about it post it or, e-mail me @ yoemen_3@hotmail.com or IM me on here.

 

I'll let ya know, I'm trying to remember the name of one of the h-ter's I talked to who had done it, and was open to sharing advice, but there is a lot that is interchangeable with Bauleycivic's thread