Notices
For Sale General Classifieds For Sale

FS or Trade Built for turbo GSR longblock with Skunk2 intake manifold

Thread Tools
 
Search this Thread
 
Old Sep 17, 2005 | 02:18 PM
  #1  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default FS or Trade Built for turbo GSR longblock with Skunk2 intake manifold

It is a B18C1 out of a 98 Acura Integra GSR. When I bought the engine I was told it has the following installed (I bought it from a friend and I was there for most of the installs so i had no reason to doubt) Mahle 9.0:1 pistons, Eagle H rods, oil pan tapped for oil return line, New bearings, new headgasket, Head has newer oem honda valvetrain(head was taken to a machine shop to make sure everything was straight and it was), Stock GSR cams (guys on HT have hit over 500 WHP with them so he did not replace them), new oem water and oil pump, new timing belt, oem cam gears, anyway it is a complete long block with a Skunk2 intake manifold. The entire setup had less than 6K miles on it when he decided to go with the H22 setup. I removed the Valve cover to get it powdercoated but I never actually got it done. I did strip it down to bare metal so the valve cover is just plain sanded down silver. Oh yeah the valve cover is cut on the end because i planned on getting adjustable cam gears but never did.

I will trade for a Type-R longblock or an all motor GSR setup. I have decided to go all motor with my next car so this engine is no longer needed. I paid $2500 for it locally a few month's back. I will also trade for a GSR swap(oem engine and tranny) with no mods for my daily driver.

phase@bellsouth.net







Modified by blackbeltclub99 at 1:55 AM 10/22/2005
Old Sep 17, 2005 | 03:25 PM
  #2  
papito_85's Avatar
Honda-Tech Member
 
Joined: May 2005
Posts: 2,825
Likes: 0
From: San Antonio, TX
Default

some pix would be nice.
Old Sep 17, 2005 | 03:27 PM
  #3  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

I will try to take some tonight or tomorrow night.
Old Sep 17, 2005 | 03:33 PM
  #4  
eg6hatch's Avatar
Junior Member
 
Joined: Feb 2003
Posts: 954
Likes: 0
From: Evansville, IN, US
Default Re: (papito_85)

check your pm
Old Sep 17, 2005 | 10:05 PM
  #5  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

PM'd you back
Old Sep 18, 2005 | 05:48 PM
  #6  
eg6hatch's Avatar
Junior Member
 
Joined: Feb 2003
Posts: 954
Likes: 0
From: Evansville, IN, US
Default Re: FS or Trade Built for turbo GSR longblock with Skunk2 intake manifold (blackbeltclub99)

Bump
Old Sep 19, 2005 | 07:35 AM
  #7  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

thanks for the bump
I will get pics tonight. I am going to try to do a compression check tonight too if my buddy lets me use his starter.
Old Sep 19, 2005 | 05:46 PM
  #8  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

hope to have the numbers in tomorrow he forgot it tonight. sorry
Old Sep 20, 2005 | 02:15 PM
  #9  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

getting ready to cp test in a little bit
Old Sep 21, 2005 | 09:01 AM
  #10  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

Sorry guys I was unaware until last night the engine is actually a 98 enigne not a 95. It has a cast date of 97. I did a compression test on it pics are up top.


Modified by blackbeltclub99 at 1:25 PM 9/21/2005
Old Sep 21, 2005 | 09:33 AM
  #11  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

bump for pics
Old Sep 21, 2005 | 08:04 PM
  #12  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

tttbumpttt
Old Sep 21, 2005 | 09:03 PM
  #13  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

trades?
Old Sep 22, 2005 | 02:26 PM
  #14  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

bump
Old Sep 22, 2005 | 08:36 PM
  #15  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

bumppp
Old Sep 23, 2005 | 05:48 PM
  #16  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

bumpptt
Old Sep 24, 2005 | 08:29 AM
  #17  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

buy me
Old Sep 24, 2005 | 05:37 PM
  #18  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

trade pending but nothing set in stone yet
Old Sep 29, 2005 | 11:22 AM
  #19  
B18B00st's Avatar
 
Joined: Jan 2005
Posts: 137
Likes: 0
From: Orlando, FL, United States
Default Re: (blackbeltclub99)

pm'ed
Old Sep 29, 2005 | 12:09 PM
  #20  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

Pm'd you back
Old Oct 10, 2005 | 09:00 PM
  #21  
happy!'s Avatar
Junior Member
 
Joined: Mar 2005
Posts: 345
Likes: 0
From: Madison, AL, US
Default Re: (blackbeltclub99)

pm'd you
Old Oct 14, 2005 | 09:42 AM
  #22  
tradesalot's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 2,163
Likes: 0
From: Church Hill, tn, USA
Default

pm'd you back
Old Dec 11, 2005 | 01:19 PM
  #23  
Fujiwuji's Avatar
Honda-Tech Member
 
Joined: Mar 2002
Posts: 446
Likes: 0
From: Columbia, MD, USA
Default Re: (blackbeltclub99)

bump
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GTibunny16v
For Sale
18
Mar 31, 2009 04:54 PM
GTibunny16v
Classifieds: Forced Induction
16
Feb 1, 2009 05:20 AM
GTibunny16v
Northeast (Sales)
15
Jan 24, 2009 06:32 PM
tradesalot
For Sale
16
Dec 24, 2005 11:39 AM




All times are GMT -8. The time now is 08:05 AM.