i heard that some body was able to fit a passwordjdm intake in a fourth gen. i tried searching but couldnt find anything. if any one has info, or better yet, pics with info pls post. im thinking about getting an air intake but alot of them are expensive, the password jdm is priced decent compared to them plus its CF. anyhoo, thx in advance

 

what kind of pictures to you need? we sell this intake and i personally dont think it will fit in a prelude.. but depends on what you want to do. relocated battery , etc, etc. i guess you can get anything to fit..

 

yea, from what i remember reading, this guy relocated his battery to the trunk. if i can get a confermation on this i'll grab me one of those intakes for my lude.

 

since i sell them i can take one and do any measurements you need

if you want me to measure l x w x h or anything ask me, ill measure it for you.

 

Mgags7 has a replica J's racing intake (same thing as password but its plastic and not CF). He still has his battery in the engine bay, I think he only had to move the AC lines and turn the battery 90 degrees to make it work.

..not sure if he has pictures though.

 

i know its huge, suck it.....

 

search isn't working for me right now, but I could have sworn that there is a thread about this. I thought that they were going to make it for the 4th gen and they were taking orders.

 

It sucks nicely though. Very good throttle response. (I've ridden in the above pictured car) I think it's a pretty good investment as far as an intake goes.

 

which model do u get? DC EG EK?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96H22aLUDE &raquo;</TD></TR><TR><TD CLASS="quote">which model do u get? DC EG EK?</TD></TR></TABLE>
btw looks nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96H22aLUDE &raquo;</TD></TR><TR><TD CLASS="quote">which model do u get? DC EG EK?</TD></TR></TABLE>

eg/ek is the same item.

if someone wants to buy one of our cf intakes, i ll give you a week to get it installed and write up a little something something for the other ludes. if it just cant fit, i mean no way of fitting, send it back and ill refund you for the effort.

 

my intake came out of an h22 eg....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mgags7 &raquo;</TD></TR><TR><TD CLASS="quote">my intake came out of an h22 eg....</TD></TR></TABLE>

and it fit without any real problems into your prelude?

 

any chance of one in a 5th gen without relocating battery?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BB6racer &raquo;</TD></TR><TR><TD CLASS="quote">any chance of one in a 5th gen without relocating battery?</TD></TR></TABLE>

i dont know, i dont have a 5th gen to test..

my offer will stand for 1 fith gen aswell.

buy one from us, ill give you a week to install it. if you cant find a way to get it to fit. none of that, well i had to move a line or two stuff. but really attempted it to fit, ill take it back. Long as you dont paint, mark or cut it!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KTeller8 &raquo;</TD></TR><TR><TD CLASS="quote">and it fit without any real problems into your prelude?</TD></TR></TABLE>

i had to bend the tiny ac line that runs near the battery so i could rotate it 90 degrees.....my coolant over overflow is ziptied up, and the intake also hits the two main ac lines where they pass over the tranny, they had to be bent a bit....then i also had to move the clips for the main engine harness...

i cant say that it was easy but it worked....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mgags7 &raquo;</TD></TR><TR><TD CLASS="quote">i had to bend the tiny ac line that runs near the battery so i could rotate it 90 degrees.....my coolant over overflow is ziptied up, and the intake also hits the two main ac lines where they pass over the tranny, they had to be bent a bit....then i also had to move the clips for the main engine harness...

i cant say that it was easy but it worked....</TD></TR></TABLE>

so without ac you would of been fine lol right?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KTeller8 &raquo;</TD></TR><TR><TD CLASS="quote">

buy one from us, ill give you a week to install it. if you cant find a way to get it to fit. none of that, well i had to move a line or two stuff. but really attempted it to fit, ill take it back. Long as you dont paint, mark or cut it!</TD></TR></TABLE>

How about you send it out, I'll try and make it work. If I can, then I'll pay

btw, how much does one go for?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tomakit &raquo;</TD></TR><TR><TD CLASS="quote">How about you send it out, I'll try and make it work. If I can, then I'll pay

btw, how much does one go for?</TD></TR></TABLE>

haha its ok, not that desperate.

but yeah they go for like $150ish

 

not sure but that looks like the j's racing that was made for integra with abs. password doesnt have a mold for the abs unit only non abs unit. that might be the reason:
j's one is from a 94-01 integra with abs as we can tell

 

how does this intake compare to others. is it mostly for looks or does it really make a difference?

 

It's made for throttle response. It does good in that aspect. The rest, is up for speculation because there are contradicting graphs on its actual hp results over other intakes.

 

there is a dyno floating around on rocket forum, there is a 2 hp or so loss from the js, and a pound or two of tq, i just love the throttle response....good stuff...

 

If we can get a definitive on what intake will most likely fit, I'll be a guinea pig.

&lt;-- 5th gen base.

I have a SRI now, could we maybe get some rough measurements on OD size?

 

dyno, pictures, comparisons

http://www.kteller.com/store/p.../1273

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tomakit &raquo;</TD></TR><TR><TD CLASS="quote">get some rough measurements on OD size?</TD></TR></TABLE>


ill measure the OD of the inlet and outlets today