2.0 Liter NA Beast!! 275+HP Potential!! All custom made quality parts! Zero MILES!! LONGBLOCK ONLY!!
SOLS SOLD SOLD!!! Thanks for your help everyone!!
[B]NEW UPDATED PRICE!!
$4,500 picked up and or shipped to lower 48 states!
You get the long block (head & block) for $4,500
Injectors have been sold! No longer included with price of longblock!
Dont let this smokin deal and BEAST of an engine pass you up!
This motor will run 11's in a Street car easily and 10s in a gutted races car NA!
What you will see next is a SERIOUS speciman of Hondas best NA Potential. This is the motor that I have been secretely building for my DC for the past 2-3yrs. Again, since I sold my car and am now getting out of the whole Honda scene I no longer have any use for this engine but Im sure someone out there will!
Im also sure that anyone into NA beasts will come to appreciate this engine for what it is and what it can be.
Head was ported by Darrel *** who runs the Mopar Sport compact drag program. He also used to do the porting for Sean Gann until he got the mopar program in 2001. The valve job was done by Blake Gann the brother of Sean Gann who pilots the Oakley Pro Stock Bike. Blake does his brothers valve jobs and not that many others..he also does Jeggs I believe but thats not for public consumption...the Valves are REV SS +1mm swirl polished. the Dual valve Springs and TI retainers are also REV, the springs were custom set up for my retarded off the wall set up by Ralph @REV and are not shelf pieces.
It is a P72 Head and it will be COMPLETE with all cam caps, loss motion assembly, VTEC solenoid etc.!
















Last but certainly not least is the 2.0 monster that I have been secretly building for the past 2-3yrs. Some of you know about this motor as I have told you of its exsistance but none of you have seen it in its reality.
The bottom end consists of a Golden Eagle Godzilla sleeved 85mm 1.8 liter block with a 1 inch Golden Eagle deck plate. The stroke length is 89mm with a 13:5:1 compression ratio utilizing custom forged Arias Pistons connected to custom forged Ultra lite Cunnigham rods. Rod length is 6.3770". The rod ratio is 1.82 & Bore to stroke ratio is 0.95 to 1. Volume at TDC is 47.61cc and the Swept Volume is 504.68.
Block comes with a custom 85mm Cometic head gasket & AEBS head studs. All new Honda OEM bearings were used in the assembly as they are the best...better than ACL. As a matter of fact...Winston Cup cars use Honda bearings in their motors!
This motor will produce well over 275+hp to the wheels in the right hands with the right tuning. No short cuts were taken, and the pictures of the quality work speaks again for themselves. Enjoy!








Im located in Socal 626 area. Prefer local buyers for smooth transaction! Return buyers get priority!
I also accept paypal plus 3% of course! Paypal verified and have PLENTY of positive vouches! Like 4pages of positive vouches! Have done tons of transactions with people all across the nation. Some of which were in the Thousand $$$ range with no problems what-so-ever!
Please dont lowball me or criticize my prices! I have spent a long part of my life tracking down these items, not to mention paying a good amount of $$$ for them so dont waste my time with lowball offers!
And finally....thank you again for lookin and please help me bump
Modified by NA-Cutie at 6:24 PM 10/7/2005
Modified by NA-Cutie at 7:24 PM 10/17/2005
Modified by NA-Cutie at 6:48 PM 11/10/2005
[B]NEW UPDATED PRICE!!
$4,500 picked up and or shipped to lower 48 states!
You get the long block (head & block) for $4,500
Injectors have been sold! No longer included with price of longblock!
Dont let this smokin deal and BEAST of an engine pass you up!
This motor will run 11's in a Street car easily and 10s in a gutted races car NA!
What you will see next is a SERIOUS speciman of Hondas best NA Potential. This is the motor that I have been secretely building for my DC for the past 2-3yrs. Again, since I sold my car and am now getting out of the whole Honda scene I no longer have any use for this engine but Im sure someone out there will!
Im also sure that anyone into NA beasts will come to appreciate this engine for what it is and what it can be.
Head was ported by Darrel *** who runs the Mopar Sport compact drag program. He also used to do the porting for Sean Gann until he got the mopar program in 2001. The valve job was done by Blake Gann the brother of Sean Gann who pilots the Oakley Pro Stock Bike. Blake does his brothers valve jobs and not that many others..he also does Jeggs I believe but thats not for public consumption...the Valves are REV SS +1mm swirl polished. the Dual valve Springs and TI retainers are also REV, the springs were custom set up for my retarded off the wall set up by Ralph @REV and are not shelf pieces.
It is a P72 Head and it will be COMPLETE with all cam caps, loss motion assembly, VTEC solenoid etc.!
















Last but certainly not least is the 2.0 monster that I have been secretly building for the past 2-3yrs. Some of you know about this motor as I have told you of its exsistance but none of you have seen it in its reality.
The bottom end consists of a Golden Eagle Godzilla sleeved 85mm 1.8 liter block with a 1 inch Golden Eagle deck plate. The stroke length is 89mm with a 13:5:1 compression ratio utilizing custom forged Arias Pistons connected to custom forged Ultra lite Cunnigham rods. Rod length is 6.3770". The rod ratio is 1.82 & Bore to stroke ratio is 0.95 to 1. Volume at TDC is 47.61cc and the Swept Volume is 504.68.
Block comes with a custom 85mm Cometic head gasket & AEBS head studs. All new Honda OEM bearings were used in the assembly as they are the best...better than ACL. As a matter of fact...Winston Cup cars use Honda bearings in their motors!
This motor will produce well over 275+hp to the wheels in the right hands with the right tuning. No short cuts were taken, and the pictures of the quality work speaks again for themselves. Enjoy!








Im located in Socal 626 area. Prefer local buyers for smooth transaction! Return buyers get priority!
I also accept paypal plus 3% of course! Paypal verified and have PLENTY of positive vouches! Like 4pages of positive vouches! Have done tons of transactions with people all across the nation. Some of which were in the Thousand $$$ range with no problems what-so-ever!
Please dont lowball me or criticize my prices! I have spent a long part of my life tracking down these items, not to mention paying a good amount of $$$ for them so dont waste my time with lowball offers!
And finally....thank you again for lookin and please help me bump
Modified by NA-Cutie at 6:24 PM 10/7/2005
Modified by NA-Cutie at 7:24 PM 10/17/2005
Modified by NA-Cutie at 6:48 PM 11/10/2005
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HKDMJack »</TD></TR><TR><TD CLASS="quote">DAAAAYYYYYUUUUUUMMMMM!!!
</TD></TR></TABLE>
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MC_Rhett_Meister »</TD></TR><TR><TD CLASS="quote">can you smell what Cherise is cooking???
</TD></TR></TABLE>
Ham & Eggs anyone?
</TD></TR></TABLE>Ham & Eggs anyone?
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMallmotaEG »</TD></TR><TR><TD CLASS="quote">look at the BOOBIES on that!!! still waiting for his call Cherise.
BUMP for joo</TD></TR></TABLE>
They are rather nice arnt they?! Thanks for lookin out! Keep me posted!
BUMP for joo</TD></TR></TABLE>
They are rather nice arnt they?! Thanks for lookin out! Keep me posted!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NA-Cutie »</TD></TR><TR><TD CLASS="quote">
Ham & Eggs anyone?
</TD></TR></TABLE>
hell yeah i want some HAMSILOG!
Ham & Eggs anyone?
</TD></TR></TABLE>hell yeah i want some HAMSILOG!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JdM DA InTeGrA »</TD></TR><TR><TD CLASS="quote">
Awsome engine, somone better pick this up
</TD></TR></TABLE>
Thanks!
Awsome engine, somone better pick this up
</TD></TR></TABLE>
Thanks!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t-blizzard »</TD></TR><TR><TD CLASS="quote">beastiality</TD></TR></TABLE>
???? I didnt know you were into that kinky stuff Timmy!
???? I didnt know you were into that kinky stuff Timmy!
lol, my crackhead friends showed me a video one night and i nearly puked. but that **** was hilarious, gross and funny at the same time
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t-blizzard »</TD></TR><TR><TD CLASS="quote">lol, my crackhead friends showed me a video one night and i nearly puked. but that **** was hilarious, gross and funny at the same time
</TD></TR></TABLE>
lol...sure...we all know we say our "friends" when its really us!
You's Nasty Timmy!
</TD></TR></TABLE>lol...sure...we all know we say our "friends" when its really us!
You's Nasty Timmy!
haha im serious, i never knew that existed. people these days are just sick, it was a chick getting boned by a dog. rofl
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t-blizzard »</TD></TR><TR><TD CLASS="quote">haha im serious, i never knew that existed. people these days are just sick, it was a chick getting boned by a dog. rofl</TD></TR></TABLE>
hahaha...ok ok...I'll let you slide...that is pretty sick though! You should see the things that go on during the Howard Stern shows!
hahaha...ok ok...I'll let you slide...that is pretty sick though! You should see the things that go on during the Howard Stern shows!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t-blizzard »</TD></TR><TR><TD CLASS="quote">that dood is strange</TD></TR></TABLE>
Yea...but he get some hoes though!
Some of them bimbos are HOT too!
Yea...but he get some hoes though!
Some of them bimbos are HOT too!


