Hey guys Dennis went to the dyno a couple weeks ago to get a few baseline runs with the SC61

Setup:
Precision SC61
3in DP
Tial 40 mm WG
Drag manifold
Precision 880 cc injectors
AEM EMS
AEM WBO2
Pauter Rods
CP Pistons
Golden Eagle Sleeves
totally stock head
Golden Eagle Intake manifold

blah, blah, blah

As always Dennis kept the tune conservative

Anyways here's the baseline run @ 12 psi...


14 psi


16 psi



Also...here's a comparison of the old drag turbo vs the precision turbo
both @ 12 psi









Modified by tunedbylorange.com at 2:13 PM 6/6/2005

 

damn nice, that last plot is great, lol, can you say flatline ------------

 

Nice numbers, wheres the comparison? I think you posted the same chart twice by mistake.

 

Nice #'s, was it on pump?

 

jesus ******* christ thats alot of hp for so little boost.

 

pretty sure it was on 110

 

You kind of figure the SC61 will make more at the same psi, but I like how the two graphs are almost the same as far as spool time and peak power and tq. Good upgrade

 

Nice #'s my boy made 444hp at 18psi with pretty much the same setup same turbo only thing different was he had A jg redline series head, looks like you will make more than he did with the stock head good #'s tho.

 

nice, meby now is the time to start looking at new ex manifolds. i never liked the drag layout.

 

what t3t4 was this compared to if you dont mind me askin?

 

your pistons are they 9-1 or other? that ******* crazy

 

Nice #'s rob.

 

nice #'s. Turn up the boost!

 

 

dayum is the precision turbos really that much more efficient?

 

nicely done

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fujimi-R_DC2 &raquo;</TD></TR><TR><TD CLASS="quote">dayum is the precision turbos really that much more efficient?</TD></TR></TABLE>

Yep

 

l'niceo

 

Not much laggier than the Drag turbo

 

whats the .ar on that turbo?

 

.63

 

Nice numbers!

 

T3/T04B 57 trim com.

 

very nice

 

looks like a .63 ar, thats weird i've only seen them with a 5 bolt flanges.