Noobie Intro, 94 Hatch
Thread Starter
PHANTOM MENACE
iTrader: (2)
Joined: May 2005
Posts: 6,042
Likes: 3
From: SYCUAN NINE, CA, USA
Noobie Intro, 94 Hatch and my 91 (sorta)
Hi guys, my name is CJ but everyone calls me Ceej. I tried to post an introduction before but it got locked because I posted it in the wrong section. The sad part is, as a noobie, I couldn't post it in the right section which is here! 
Anyways, here's my daily driver (one of my 3 project cars). I have another hatch (it's a 91), but by most people's standards, it's "rice." I was in the process of attempting a make over but I am going to lose my job soon so all of my cars will remain in their current state. My third car is a non Honda so we won't worry about that. In any case, hope you like my daily driver...don't hate on it too much.
and here's a pic of my 91 from back in the day (before any body mods were done).
Modified by 24TEN at 2:29 PM 6/1/2005
Anyways, here's my daily driver (one of my 3 project cars). I have another hatch (it's a 91), but by most people's standards, it's "rice." I was in the process of attempting a make over but I am going to lose my job soon so all of my cars will remain in their current state. My third car is a non Honda so we won't worry about that. In any case, hope you like my daily driver...don't hate on it too much. and here's a pic of my 91 from back in the day (before any body mods were done).
Modified by 24TEN at 2:29 PM 6/1/2005
Honda-Tech Member
Joined: May 2004
Posts: 1,136
Likes: 0
From: Kansas city
Re: Noobie Intro, 94 Hatch (cre18)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cre18 »</TD></TR><TR><TD CLASS="quote">welcome to HT, nice hatch y0! 
</TD></TR></TABLE>
</TD></TR></TABLE>
Trending Topics
Thread Starter
PHANTOM MENACE
iTrader: (2)
Joined: May 2005
Posts: 6,042
Likes: 3
From: SYCUAN NINE, CA, USA
Thanks guys. Actually, it has a duck bill wing now, I just didn't have it in these pictures. Here's a newer pic:
As for the money shot, it's just my daily driver so I left it stock. I do have a motor in the garage ready to swap, but i'm enjoying the gas mileage of the stock motor since I drive 55+ miles round trip to work each day. But since you asked, here it is:
and the unrealized money shot:
As for the money shot, it's just my daily driver so I left it stock. I do have a motor in the garage ready to swap, but i'm enjoying the gas mileage of the stock motor since I drive 55+ miles round trip to work each day. But since you asked, here it is:
and the unrealized money shot:
Honda-Tech Member
Joined: Jan 2005
Posts: 1,296
Likes: 0
From: Jersey
Re: (MugenRSX-S27)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cre18 »</TD></TR><TR><TD CLASS="quote">welcome to HT, nice hatch y0! </TD></TR></TABLE>
Thread Starter
PHANTOM MENACE
iTrader: (2)
Joined: May 2005
Posts: 6,042
Likes: 3
From: SYCUAN NINE, CA, USA
Re: Noobie Intro, 94 Hatch (BS 22)
It's still half and half but I'll be going back to the 13in steelies for a while. The Work wheels all have bent lips and I need to fix them while I still have money to do so LOL! It's irritating to have to fill up the tires with air every few days.
As for the "rice" hatch, I'm afraid to get flamed by people on here so the pic above will have to do. But I can show the engine of that one if you like...
As for the "rice" hatch, I'm afraid to get flamed by people on here so the pic above will have to do. But I can show the engine of that one if you like...
Thread Starter
PHANTOM MENACE
iTrader: (2)
Joined: May 2005
Posts: 6,042
Likes: 3
From: SYCUAN NINE, CA, USA
Yep. It's out of commission at the moment though. I was trying to replace the cam seals but I dropped one of the keys for the camshaft/sprocket into the timing belt area. Now I gotta take the darn timing belt cover off and find it. Here it is as it sits today:
I'm considering pulling the motor and going back to stock since I will be undoing all of the body work on it. Still undecided on what to do but smog is due in just a few weeks and I lose my job shortly after that. Time and money are running out!!! LOL
I'm considering pulling the motor and going back to stock since I will be undoing all of the body work on it. Still undecided on what to do but smog is due in just a few weeks and I lose my job shortly after that. Time and money are running out!!! LOL
