fs:b16 built portflow head....first 1600 picked up (socal)
05-05-2005, 06:22 AM
#1
Thread Starter
Join Date: Oct 2002
Location: hittin switches on bitches..., 92201
Posts: 22,146
Likes: 0
Received 0 Likes
on
0 Posts
fs:b16 built portflow head....first 1600 picked up (socal)
SOLDwill do 1700 shipped....at the moment my buddy doesn't know what valvetrain it has-who did the ports and if the cams are crowers or ctrs'...he just recently got the car and pulled it apart...he's gonna get ahold of the cat that sold him the car and is gonna grab all the info,so head wont be sold until then but here are some pics of it for now...make best offers,..... 
Modified by spoon20 at 3:19 PM 5/6/2005
Modified by spoon20 at 3:36 PM 5/6/2005
Modified by spoon20 at 3:39 PM 5/6/2005
Modified by spoon20 at 5:05 PM 5/8/2005
Modified by spoon20 at 3:19 PM 5/6/2005
Modified by spoon20 at 3:36 PM 5/6/2005
Modified by spoon20 at 3:39 PM 5/6/2005
Modified by spoon20 at 5:05 PM 5/8/2005
05-05-2005, 07:38 PM
#7
Honda-Tech Member
Join Date: May 2004
Location: 818 Represent, CA
Posts: 2,171
Likes: 0
Received 0 Likes
on
0 Posts
Re: fs:b16 built portflow head....first 1600 picked up (spoon20)
SCAMMER!!! BEWARE!!!!
https://honda-tech.com/zerothread?id=1145552
LOTS OF PEOPLE HAVE BEEN SCAMMED BY SPOON20 HE IS EVEN ON THE SCAMMER PAGE BECAREFULL BEFORE YOU BUY FROM HIM. HERE ARE SOME OF THE **** UP DEALS THAT SPOON DID WITH SOME HT-MEMBERS
HE IS GOT MORE THAN ONE COMPLAINT IS TOO MANY...
YOU CAN CONTACT THE PEOPLE LISTED TO VERYFY OR CHECK WITH THE MODS
Quote, originally posted by spoon20 »
he hits me up a week later saying the valvesprings and retainers were STOCK....and that he wants another set of valvesprings and retainers asap...i was like what the fawk are u talking about......
HE IS TALKING ABOUT ME POWERINTEGRA BUT LATER ON SPOON WANTED TO GIVE ME THE RIGHT PARTS HIS BROTHER DID TOO BUT THERE WAS MORE **** WRONG WITH THE HEAD (HE SAID IT WAS NEW AND BUILT BS....)
HE LIES TO EVERYONE AND NOW WANT TO GIVE ME THE CORRECT PARTS>???Dont be shady and bad karma wont happen.... it just looks like your luck ran out.. No more SCAMMING FOR YOU.!!!!
Quote, originally posted by HmgLauj69 »
had a deal with spoon20 a while back...he didn't tell me how crapy the stuff i bought was going to be...i just took his word for it and when i finally had time to check it out crap! i didn't know how to save pm's back then so i couldn't do ****...got screwed pretty bad, cost me a pretty penny too...seems like the case with POWERINTEGRA too, hope you get your **** POWER...i will NEVER buy from spoon20 again.
So who is Shady NOW??
He/ his brother gave some one the wrong engine?
How can you make this mistake d16y7 is printed on the motor this is a mistake that you don't make. Spoon porbably refunded the money because the scamm was obvios....
hey bro, this is spoon20's older bro, pat, i'll put an end to all this little bullshit bickering, tom is out so i will resolve this, how about you take back the stock ls head you gave him that by the way was missing rockers as well as some other parts and i think he still has the bov or wg, so you get the head and one of the other 2, not everything because as far as i see it, that should compensate for the fucked up deal....me and my bro's haven't tried to **** anyone, and as a matter of fact, i did 2 deals today, even drove 2 and a half hours to meet combo from san franscico, also RETURNED 325 to Ladodgers 1 today becuase the d16y7 i sold him turned out to be a d15b7, people **** up sometimes, and they come to resolve things......so don't come back with
"and yes I do wanna kick your *** I'll admit because of your scam
but if your are willing to fix it I'm more than happy to put everything on my part to fix this in a properly manner"
Becuase bro thats a long *** drive for an *** whooping , lol bro but thats just how things go, brothers
Get back to me at Drag4ink or leave another post, none the less, hope this resolves everything......
You'll get the parts i mentioned and thats it, you keep the built head this ****
WHAT YOU GOT TO SAY ABOUT THIS
pm ON FILE A MOD CAN CHECK THIS AND VERYFIED THAT I WAS CONTACTED BY SEVERAL PEOPLE AND **** UP DEALS WITH SPOON.....
(4:53 AM 2/13/2005) ANONIMOUS: Unfortunately, Im in a tough position, because I too purchased a head for a customer/friend in which it was supposed to have been portflow port and polished and have an upgraded valvetrain. It had neither and what sucks is that my friend is the type of guy that likes to avoid situations, though, spoon20 sent my friend a money order for roughly $400 to basically "be happy and be quite".. it was a tough situation because since I could not "prove" the head that was in question was the one I received from spoon20 (ie. anyone can switch out what is in the box that someone sends you, etc.) I couldnt say anything, as he threatened my company with defimation of character if I said anything publically. So, this is not public and I will deny everything if anything is brought up (ie. my screen name or company name or any direct/indirect reference to my company) as it could mean a legal issue. However, I thought you might find this interesting.
(4:56 AM 2/13/2005) POWERINTEGRA: ummm this guy might be a real scammer man i didn't know
(5:00 AM 2/13/2005) ANONIMOUS: Very well possible, what I know is what my friend experienced. Though, again, I'm unable to say a word as my lawyer informed me not to make such public as it would be difficult to prove in court that the head I -did- receive from him, was indeed a head that I received from him. Funny how the legal system works, sad but true (for the case of businesses anyway).
I HOPE THIS WILL RING SOME BELLS PEOPLE WILL BECAREFULL BEFORE YOU BUY
IF THIS ARE NOT SCAMMS SO WHAT DO YOU CALLL WHAT YOU DID TO THIS PEOPLE SPOON?
WANNA TELL US ABOUT IT...
Quote, originally posted by spoon20 »
look at my vouches fella....done over 3-4 deals this week,what can i say i'm a busy man, besides look at your post compared to mine,doubt i would last this long being a scammer....bro get a life and quit slandering my name u *******... As for anyone who wants to do business with me ...before doing so u can hit anyone of these people i have done biss with and get their approval if it makes you fell safer..panda power,made in japan,00 FBPItR,eg6ken22,JCracer723,trbo823, mssEG6,streetdreams02 ,itec311, jdmclvlc, sPoOLiN' EF8,B18Flip,Outsane ,jdmek9gsr2, B18C1-Turbo,oddsquadbboy, sPaRk'iT, blown_LS,MindEracer, Miracle_X_Bar,IM ALL BOB, ceasar of mgineering-subtitle-jdmcarboy-exactvox-ken-E -usdm420-psi420-luserkid-miraclexbar-jackson-oz rally- integra n civic-ozzyman-b18flip-b18bturbo-fjt-tmex05-b18b-art701-vtecvoodoo-tgreaves-PLAGUED_DB7-slimm rw-msmotorsports-ViZiONiZM-milton-sparkz-narspec.com-exospeed.com-Supah_Eg6-KREW-sparkz-B 1 8 C 1-lightsleeper-rodrez-guilotine- SMZ GSR-narib2001-zerozerotyper-swags04--ali boulala-socalnative- Shaun-blackstar-blitzed-CWESTINDC2-Vtaaak y0-DRFlickner-jappwr-hybrid89-dub204-doughboy247-barok-accordfreak-1jdmef9-h4 project-shygsr-hybridvteceg, hybrid-performance.com-bao-7-jdmdc2909-and spnfedej .. can also hit up lseghatch-.. who i'm am dealing with aswe speak or h4 project,he came to my house yesterday and picked up his part just like power did....
You can also say your % is a 96% also type down the people you scammed below the vouch list......
and you can also do some explaining on your scamms maybe refund people their money and give them their stuff if you are such a great legit seller!
Having many posts don't mean ****....
Having many deals don't mean **** either I'm glad other people didn't get **** good for them but doesn't mean you didn't **** others...
There has been more than one bad deal in which you scammed others
Prove me wrong.....
wanna explain?,say something about it ...
or do something to take care of this people if they are unhappy with the deals
obviously you did something wrong and nothing to get the problem fix?
The reason I trusted you was because of your vouches
But didn't keep me or others from getting scamm vouches did not help to get their money back or parts neither the posts you have did...
Who is on the scammer page not me....
Posts vouches don't mean **** go figure....
Quote, originally posted by spoon20 »
those ordeals were sorted long ago buddy,so why do you keep this up,grow up already and stop acting like a child,because trust me i can be a lil bitch and start screwing with your threads,so get the story right
So you agree on the fucke up deals as fars as screwing with my threads you got nothing on me...
Quote, originally posted by spoon20 »
your a dumb *** i'm not stating that that i did a fucked up deal,i'm stating that there must have been some miscommunication in the past that me and a fellow honda-tecker sorted out already,your the fucked up one who constantly never gives up and ruins all my threads,please go away cus u aint getting anything for free from me...read the sig pal...
so you agree again....
I don't care I'll just let people judge as far as whoever buys from you at least they will read this.....
and might not buy
https://honda-tech.com/zerothread?id=1145552
LOTS OF PEOPLE HAVE BEEN SCAMMED BY SPOON20 HE IS EVEN ON THE SCAMMER PAGE BECAREFULL BEFORE YOU BUY FROM HIM. HERE ARE SOME OF THE **** UP DEALS THAT SPOON DID WITH SOME HT-MEMBERS
HE IS GOT MORE THAN ONE COMPLAINT IS TOO MANY...
YOU CAN CONTACT THE PEOPLE LISTED TO VERYFY OR CHECK WITH THE MODS
Quote, originally posted by spoon20 »
he hits me up a week later saying the valvesprings and retainers were STOCK....and that he wants another set of valvesprings and retainers asap...i was like what the fawk are u talking about......
HE IS TALKING ABOUT ME POWERINTEGRA BUT LATER ON SPOON WANTED TO GIVE ME THE RIGHT PARTS HIS BROTHER DID TOO BUT THERE WAS MORE **** WRONG WITH THE HEAD (HE SAID IT WAS NEW AND BUILT BS....)
HE LIES TO EVERYONE AND NOW WANT TO GIVE ME THE CORRECT PARTS>???Dont be shady and bad karma wont happen.... it just looks like your luck ran out.. No more SCAMMING FOR YOU.!!!!
Quote, originally posted by HmgLauj69 »
had a deal with spoon20 a while back...he didn't tell me how crapy the stuff i bought was going to be...i just took his word for it and when i finally had time to check it out crap! i didn't know how to save pm's back then so i couldn't do ****...got screwed pretty bad, cost me a pretty penny too...seems like the case with POWERINTEGRA too, hope you get your **** POWER...i will NEVER buy from spoon20 again.
So who is Shady NOW??
He/ his brother gave some one the wrong engine?
How can you make this mistake d16y7 is printed on the motor this is a mistake that you don't make. Spoon porbably refunded the money because the scamm was obvios....
hey bro, this is spoon20's older bro, pat, i'll put an end to all this little bullshit bickering, tom is out so i will resolve this, how about you take back the stock ls head you gave him that by the way was missing rockers as well as some other parts and i think he still has the bov or wg, so you get the head and one of the other 2, not everything because as far as i see it, that should compensate for the fucked up deal....me and my bro's haven't tried to **** anyone, and as a matter of fact, i did 2 deals today, even drove 2 and a half hours to meet combo from san franscico, also RETURNED 325 to Ladodgers 1 today becuase the d16y7 i sold him turned out to be a d15b7, people **** up sometimes, and they come to resolve things......so don't come back with
"and yes I do wanna kick your *** I'll admit because of your scam
but if your are willing to fix it I'm more than happy to put everything on my part to fix this in a properly manner"
Becuase bro thats a long *** drive for an *** whooping , lol bro but thats just how things go, brothers
Get back to me at Drag4ink or leave another post, none the less, hope this resolves everything......
You'll get the parts i mentioned and thats it, you keep the built head this ****
WHAT YOU GOT TO SAY ABOUT THIS
pm ON FILE A MOD CAN CHECK THIS AND VERYFIED THAT I WAS CONTACTED BY SEVERAL PEOPLE AND **** UP DEALS WITH SPOON.....
(4:53 AM 2/13/2005) ANONIMOUS: Unfortunately, Im in a tough position, because I too purchased a head for a customer/friend in which it was supposed to have been portflow port and polished and have an upgraded valvetrain. It had neither and what sucks is that my friend is the type of guy that likes to avoid situations, though, spoon20 sent my friend a money order for roughly $400 to basically "be happy and be quite".. it was a tough situation because since I could not "prove" the head that was in question was the one I received from spoon20 (ie. anyone can switch out what is in the box that someone sends you, etc.) I couldnt say anything, as he threatened my company with defimation of character if I said anything publically. So, this is not public and I will deny everything if anything is brought up (ie. my screen name or company name or any direct/indirect reference to my company) as it could mean a legal issue. However, I thought you might find this interesting.
(4:56 AM 2/13/2005) POWERINTEGRA: ummm this guy might be a real scammer man i didn't know
(5:00 AM 2/13/2005) ANONIMOUS: Very well possible, what I know is what my friend experienced. Though, again, I'm unable to say a word as my lawyer informed me not to make such public as it would be difficult to prove in court that the head I -did- receive from him, was indeed a head that I received from him. Funny how the legal system works, sad but true (for the case of businesses anyway).
I HOPE THIS WILL RING SOME BELLS PEOPLE WILL BECAREFULL BEFORE YOU BUY
IF THIS ARE NOT SCAMMS SO WHAT DO YOU CALLL WHAT YOU DID TO THIS PEOPLE SPOON?
WANNA TELL US ABOUT IT...
Quote, originally posted by spoon20 »
look at my vouches fella....done over 3-4 deals this week,what can i say i'm a busy man, besides look at your post compared to mine,doubt i would last this long being a scammer....bro get a life and quit slandering my name u *******... As for anyone who wants to do business with me ...before doing so u can hit anyone of these people i have done biss with and get their approval if it makes you fell safer..panda power,made in japan,00 FBPItR,eg6ken22,JCracer723,trbo823, mssEG6,streetdreams02 ,itec311, jdmclvlc, sPoOLiN' EF8,B18Flip,Outsane ,jdmek9gsr2, B18C1-Turbo,oddsquadbboy, sPaRk'iT, blown_LS,MindEracer, Miracle_X_Bar,IM ALL BOB, ceasar of mgineering-subtitle-jdmcarboy-exactvox-ken-E -usdm420-psi420-luserkid-miraclexbar-jackson-oz rally- integra n civic-ozzyman-b18flip-b18bturbo-fjt-tmex05-b18b-art701-vtecvoodoo-tgreaves-PLAGUED_DB7-slimm rw-msmotorsports-ViZiONiZM-milton-sparkz-narspec.com-exospeed.com-Supah_Eg6-KREW-sparkz-B 1 8 C 1-lightsleeper-rodrez-guilotine- SMZ GSR-narib2001-zerozerotyper-swags04--ali boulala-socalnative- Shaun-blackstar-blitzed-CWESTINDC2-Vtaaak y0-DRFlickner-jappwr-hybrid89-dub204-doughboy247-barok-accordfreak-1jdmef9-h4 project-shygsr-hybridvteceg, hybrid-performance.com-bao-7-jdmdc2909-and spnfedej .. can also hit up lseghatch-.. who i'm am dealing with aswe speak or h4 project,he came to my house yesterday and picked up his part just like power did....
You can also say your % is a 96% also type down the people you scammed below the vouch list......
and you can also do some explaining on your scamms maybe refund people their money and give them their stuff if you are such a great legit seller!
Having many posts don't mean ****....
Having many deals don't mean **** either I'm glad other people didn't get **** good for them but doesn't mean you didn't **** others...
There has been more than one bad deal in which you scammed others
Prove me wrong.....
wanna explain?,say something about it ...
or do something to take care of this people if they are unhappy with the deals
obviously you did something wrong and nothing to get the problem fix?
The reason I trusted you was because of your vouches
But didn't keep me or others from getting scamm vouches did not help to get their money back or parts neither the posts you have did...
Who is on the scammer page not me....
Posts vouches don't mean **** go figure....
Quote, originally posted by spoon20 »
those ordeals were sorted long ago buddy,so why do you keep this up,grow up already and stop acting like a child,because trust me i can be a lil bitch and start screwing with your threads,so get the story right
So you agree on the fucke up deals as fars as screwing with my threads you got nothing on me...
Quote, originally posted by spoon20 »
your a dumb *** i'm not stating that that i did a fucked up deal,i'm stating that there must have been some miscommunication in the past that me and a fellow honda-tecker sorted out already,your the fucked up one who constantly never gives up and ruins all my threads,please go away cus u aint getting anything for free from me...read the sig pal...
so you agree again....
I don't care I'll just let people judge as far as whoever buys from you at least they will read this.....
and might not buy
Trending Topics
05-05-2005, 07:48 PM
#8
Thread Starter
Join Date: Oct 2002
Location: hittin switches on bitches..., 92201
Posts: 22,146
Likes: 0
Received 0 Likes
on
0 Posts
Re: fs:b16 built portflow head....first 1600 picked up (POWERINTEGRA)
thanks for the bump homey,haha i dont even wanna say anything anymore....this guy needs his meds
05-06-2005, 10:13 PM
#15
Honda-Tech Member
Join Date: May 2004
Location: 818 Represent, CA
Posts: 2,171
Likes: 0
Received 0 Likes
on
0 Posts
Re: fs:b16 built portflow head....first 1600 picked up (clean rice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean rice »</TD></TR><TR><TD CLASS="quote">You expect 1,600 bucks with that info and pictures!? You're outta your ****** mind!</TD></TR></TABLE>
Not only that but I thought this was a port flow head with skunk2 valve train, crower cams and I don't know what else he posted before he edit the thread all of a sudden he didn't know what the stuff on the head was
I hope no-one gets scammed
I must be out of my mind again..
Not only that but I thought this was a port flow head with skunk2 valve train, crower cams and I don't know what else he posted before he edit the thread all of a sudden he didn't know what the stuff on the head was
I hope no-one gets scammed
I must be out of my mind again..
05-07-2005, 09:11 AM
#19
Thread Starter
Join Date: Oct 2002
Location: hittin switches on bitches..., 92201
Posts: 22,146
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ml2Voeg6)
first of all...i'm selling this head for a friend...i was informed on info giving to me b4 i even posted pics...therfor my reasoning on posting for offers until further notice on this particular head...thank you for your inquiries...
05-07-2005, 11:02 AM
#20
Honda-Tech Member
Join Date: May 2004
Location: 818 Represent, CA
Posts: 2,171
Likes: 0
Received 0 Likes
on
0 Posts
Re: (spoon20)
I THINK I NEED MY MEDS AGAIN OR SPOON JUST GOT CAU... AGAIN TRYING TO SCAMM!!!!
I tought port flow was top of the line and does heads using their parts....
This isn't port flow for **** correct me if I'm wrong. Is this false advertisement, what the **** is this guy trying to sell. Port flow should be notified someone is trying to sell heads using their name as a way to get attention but selling stock ****
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoon20 »</TD></TR><TR><TD CLASS="quote">first of all...i'm selling this head for a friend...i was informed on info giving to me b4 i even posted pics...therfor my reasoning on posting for offers until further notice on this particular head...thank you for your inquiries... </TD></TR></TABLE>
Sounds just like the way I was scammed head was suppose to be fully built etc, when I got it it was something else. Oh well Spoon keeps traying to sell stuff he don't know **** about he goes and tells people this is a portflow head, with skunk2 valve train, crover cams, racing valves etc. Sounds good right!
A kid might read this look at his vouches take spoon words for it. Buy the head and when he gets is, he will get a stock head with a screw driver port work, and stock valve train, etc, But according to Spoon he wouldn't scam anyone and always sells legit parts blah blah blah...
Just the way I got a head from him that was suppose to be the **** this is what he post it and told me sounds like this head
from thread https://honda-tech.com/zerothread?id=1074685
Quote: orinally posted by Spoon20:..... all parts are brand new and have never been used...Am just gonna go vtec...would trade parts straight across for vtec turbo head parts....ok heres prices if sold seperate=head is ported by local shop for turbo application with 3 angle valve job-new seals and keepers would do that for 400 shipped...ls isky racing valvesprings and retainers for 300 shipped...rev racing exh valves-150 shipped....ferrea oversized intake valves 200 shipped....jg 301 cams 275 shipped...hondata s200 with chipped ls ecu for 475 shipped...and finally a skunk manifold for ls/b20 for 215 shipped...... or buy all for 2000
When I got it I got a stock head but he says I'm out of my mind
Modified by POWERINTEGRA at 8:14 PM 5/7/2005
Modified by POWERINTEGRA at 8:15 PM 5/7/2005
SPOON JUST GOT CAU... AGAIN TRYING TO SCAMM!!!!I tought port flow was top of the line and does heads using their parts....
This isn't port flow for **** correct me if I'm wrong. Is this false advertisement, what the **** is this guy trying to sell. Port flow should be notified someone is trying to sell heads using their name as a way to get attention but selling stock ****
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoon20 »</TD></TR><TR><TD CLASS="quote">first of all...i'm selling this head for a friend...i was informed on info giving to me b4 i even posted pics...therfor my reasoning on posting for offers until further notice on this particular head...thank you for your inquiries...
</TD></TR></TABLE>Sounds just like the way I was scammed head was suppose to be fully built etc, when I got it it was something else. Oh well Spoon keeps traying to sell stuff he don't know **** about he goes and tells people this is a portflow head, with skunk2 valve train, crover cams, racing valves etc. Sounds good right!
A kid might read this look at his vouches take spoon words for it. Buy the head and when he gets is, he will get a stock head with a screw driver port work, and stock valve train, etc, But according to Spoon he wouldn't scam anyone and always sells legit parts blah blah blah...
Just the way I got a head from him that was suppose to be the **** this is what he post it and told me sounds like this head
from thread https://honda-tech.com/zerothread?id=1074685
Quote: orinally posted by Spoon20:..... all parts are brand new and have never been used...Am just gonna go vtec...would trade parts straight across for vtec turbo head parts....ok heres prices if sold seperate=head is ported by local shop for turbo application with 3 angle valve job-new seals and keepers would do that for 400 shipped...ls isky racing valvesprings and retainers for 300 shipped...rev racing exh valves-150 shipped....ferrea oversized intake valves 200 shipped....jg 301 cams 275 shipped...hondata s200 with chipped ls ecu for 475 shipped...and finally a skunk manifold for ls/b20 for 215 shipped...... or buy all for 2000
When I got it I got a stock head
but he says I'm out of my mind Modified by POWERINTEGRA at 8:14 PM 5/7/2005
Modified by POWERINTEGRA at 8:15 PM 5/7/2005
05-07-2005, 11:17 AM
#21
Honda-Tech Member
Join Date: May 2004
Location: 818 Represent, CA
Posts: 2,171
Likes: 0
Received 0 Likes
on
0 Posts
Re: fs:b16 built portflow head....first 1600 picked up (spoon20)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoon20 »</TD></TR><TR><TD CLASS="quote">will do 1700 shipped....at the moment my buddy doesn't know what valvetrain it has-who did the ports and if the cams are crowers or ctrs'...he just recently got the car and pulled it apart...he's gonna get ahold of the cat that sold him the car and is gonna grab all the info,so head wont be sold until then but here are some pics of it for now...make best offers,.....
Modified by spoon20 at 3:19 PM 5/6/2005
Modified by spoon20 at 3:36 PM 5/6/2005
Modified by spoon20 at 3:39 PM 5/6/2005</TD></TR></TABLE>
Modified by spoon20 at 3:19 PM 5/6/2005
Modified by spoon20 at 3:36 PM 5/6/2005
Modified by spoon20 at 3:39 PM 5/6/2005</TD></TR></TABLE>
05-07-2005, 11:17 AM
#22
Thread Starter
Join Date: Oct 2002
Location: hittin switches on bitches..., 92201
Posts: 22,146
Likes: 0
Received 0 Likes
on
0 Posts
Re: (POWERINTEGRA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POWERINTEGRA »</TD></TR><TR><TD CLASS="quote">SPOON JUST GOT CAU... AGAIN TRYING TO SCAMM!!!!
I tought port flow was top of the line and does heads using their parts....
This isn't port flow for **** correct me if I'm wrong. Is this false advertisement, what the **** is this guy trying to sell. Port flow should be notified someone is trying to sell heads using their name as a way to get attention but selling stock ****
Sounds just like the way I was scammed head was suppose to be fully built etc, when I got it it was something else. Oh well Spoon keeps traying to sell stuff he don't know **** about he goes and tells people this is a portflow head, with skunk2 valve train, crover cams, racing valves etc. Sounds good right!
A kid might read this look at his vouches take spoon words for it. Buy the head and when he gets is, he will get a stock head with a screw driver port work, and stock valve train, etc, But according to Spoon he wouldn't scam anyone and always sells legit parts blah blah blah...
Just the way I got a head from him that was suppose to be the **** this is what he post it and told me sounds like this head
from thread https://honda-tech.com/zerothread?id=1074685
Quote: orinally posted by Spoon20:..... all parts are brand new and have never been used...Am just gonna go vtec...would trade parts straight across for vtec turbo head parts....ok heres prices if sold seperate=head is ported by local shop for turbo application with 3 angle valve job-new seals and keepers would do that for 400 shipped...ls isky racing valvesprings and retainers for 300 shipped...rev racing exh valves-150 shipped....ferrea oversized intake valves 200 shipped....jg 301 cams 275 shipped...hondata s200 with chipped ls ecu for 475 shipped...and finally a skunk manifold for ls/b20 for 215 shipped...... or buy all for 2000
When I got it I got a stock head but he says I'm out of my mind
Modified by POWERINTEGRA at 8:14 PM 5/7/2005</TD></TR></TABLE>hey jerk off just like i posted b4 i posted for a friend b4 i got pics...and 1 more thing holmes " engrish prease",,,god you need a tutor...
I tought port flow was top of the line and does heads using their parts....
This isn't port flow for **** correct me if I'm wrong. Is this false advertisement, what the **** is this guy trying to sell. Port flow should be notified someone is trying to sell heads using their name as a way to get attention but selling stock ****
Sounds just like the way I was scammed head was suppose to be fully built etc, when I got it it was something else. Oh well Spoon keeps traying to sell stuff he don't know **** about he goes and tells people this is a portflow head, with skunk2 valve train, crover cams, racing valves etc. Sounds good right!
A kid might read this look at his vouches take spoon words for it. Buy the head and when he gets is, he will get a stock head with a screw driver port work, and stock valve train, etc, But according to Spoon he wouldn't scam anyone and always sells legit parts blah blah blah...
Just the way I got a head from him that was suppose to be the **** this is what he post it and told me sounds like this head
from thread https://honda-tech.com/zerothread?id=1074685
Quote: orinally posted by Spoon20:..... all parts are brand new and have never been used...Am just gonna go vtec...would trade parts straight across for vtec turbo head parts....ok heres prices if sold seperate=head is ported by local shop for turbo application with 3 angle valve job-new seals and keepers would do that for 400 shipped...ls isky racing valvesprings and retainers for 300 shipped...rev racing exh valves-150 shipped....ferrea oversized intake valves 200 shipped....jg 301 cams 275 shipped...hondata s200 with chipped ls ecu for 475 shipped...and finally a skunk manifold for ls/b20 for 215 shipped...... or buy all for 2000
When I got it I got a stock head
but he says I'm out of my mind Modified by POWERINTEGRA at 8:14 PM 5/7/2005</TD></TR></TABLE>hey jerk off just like i posted b4 i posted for a friend b4 i got pics...and 1 more thing holmes " engrish prease",,,god you need a tutor...
05-07-2005, 11:23 AM
#23
Honda-Tech Member
Join Date: May 2004
Location: 818 Represent, CA
Posts: 2,171
Likes: 0
Received 0 Likes
on
0 Posts
Re: (spoon20)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoon20 »</TD></TR><TR><TD CLASS="quote">hey jerk off just like i posted b4 i posted for a friend b4 i got pics...and 1 more thing holmes " engrish prease",,,god you need a tutor... </TD></TR></TABLE>
and you need to stop your BS Scamms I don't care if you post it for a friend you posted what you posted. "PORTFLOW HEAD RIGH"
You are the one trying to sell not your friend. You saw the head right you even posted pics. Ummmm Let me guess you didn't know even when you look at it, Oh wait now you gonna edit your post again and maybe post the right info. or did you just get caught....
</TD></TR></TABLE>and you need to stop your BS Scamms I don't care if you post it for a friend you posted what you posted. "PORTFLOW HEAD RIGH"
You are the one trying to sell not your friend. You saw the head right you even posted pics. Ummmm Let me guess you didn't know even when you look at it, Oh wait now you gonna edit your post again and maybe post the right info. or did you just get caught....
05-07-2005, 11:40 AM
#24
Thread Starter
Join Date: Oct 2002
Location: hittin switches on bitches..., 92201
Posts: 22,146
Likes: 0
Received 0 Likes
on
0 Posts
Re: (POWERINTEGRA)
you are a ******* TARD...i can guarantee you almost 99.9% of people on h-t have done a deal for a friend...get a life you **** fiend...
05-07-2005, 11:44 AM
#25
BANNED
Join Date: Nov 2003
Location: westminster, ca, usa
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Re: (spoon20)
why are you calling him a TARD when YOU my friend are the tard that wants 1600 for a stock b16 head not to mention how ugly it looks and hope u rip me off one day so i can give u a whooping **** scammers
**** scammers