sup guys well i did some work on my car yesterday i put in an oil line for my oil pressure gauge, did a valve adjustment, clean out my iacv and thats about it. Car starts good and idles alright but as soon as i press in the clutch it dies. If i slowly press in the clutch it slowly goes down in rpms then dies. Any input will help this is my only ride to work. THX

 

I have the same problem. No noticeable power loss or anything. Just started one day (2 days after I changed the pugs). Press in the clutch and it sometimes it dies and sometimes it barely catches. Thought maybe I could find the answer here.

 

yea i dont know whatz up wit it im think clutch master cylinder or sumptin like that really dont feel like pullin my tranny out again. but mine doesnt catch it dies as soon as i press n the clutch like its a kill switch.

 

well ive done some more tunning like adjusting the tps (it was way off like at 78), rechecked my valve clearances and timing(dead on). Spark plugs/wires and distributor look good lil bit off white buildup on the distributor cap but not alot. So now when i engage the clutch it doesnt die but it gets damn near close to it like down to 200 rpms. Also my idle adjusting screw has no affect on the idle but it idle at 850rpm so im not really worried bout it but would like to know why. Any input would be greatful