D Series/D16 Turbo and Manifold
Thread Starter
Member
Joined: Oct 2001
Posts: 3,350
Likes: 0
D Series/D16 Turbo and Manifold
I have:
-Garrett T3 50 Trim .42/.48ar w/Minimal Shaft Play for $185 Shipped
(There is no internal wastegate swing valve or wastegate actuator, right now its made to run an external wastegate, unless you buy a swing valve and wastegate actuator to run a internal wastegate setup)
-SOHC/D16/D15/D Series T3 Log Manifold for $180 Shipped
If you plan to send the money by paypal, add 3% to the total
The manifold has a bit of surface rust, which can be taken off with a wire brush or so. Manifold is not ac compatible
If you are interested, hit me up on aim or pm, my aim is oxsleeperxo
Check out my profile for vouches and my vouch thread https://honda-tech.com/zerothread?id=1033136
Modified by oxSLEEPERxo at 4:52 PM 4/25/2005
-Garrett T3 50 Trim .42/.48ar w/Minimal Shaft Play for $185 Shipped
(There is no internal wastegate swing valve or wastegate actuator, right now its made to run an external wastegate, unless you buy a swing valve and wastegate actuator to run a internal wastegate setup)
-SOHC/D16/D15/D Series T3 Log Manifold for $180 Shipped
If you plan to send the money by paypal, add 3% to the total
The manifold has a bit of surface rust, which can be taken off with a wire brush or so. Manifold is not ac compatible
If you are interested, hit me up on aim or pm, my aim is oxsleeperxo
Check out my profile for vouches and my vouch thread https://honda-tech.com/zerothread?id=1033136
Modified by oxSLEEPERxo at 4:52 PM 4/25/2005
Thread Starter
Member
Joined: Oct 2001
Posts: 3,350
Likes: 0
Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo »</TD></TR><TR><TD CLASS="quote"> 
</TD></TR></TABLE>
</TD></TR></TABLE>
Trending Topics
Thread Starter
Member
Joined: Oct 2001
Posts: 3,350
Likes: 0
Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
</TD></TR></TABLE>
Joined: Aug 2004
Posts: 214
Likes: 0
From: Newhall, CA, USA
Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
Thread Starter
Member
Joined: Oct 2001
Posts: 3,350
Likes: 0
Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo »</TD></TR><TR><TD CLASS="quote">anymore offers?</TD></TR></TABLE>
Thread Starter
Member
Joined: Oct 2001
Posts: 3,350
Likes: 0
Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo »</TD></TR><TR><TD CLASS="quote">pm's replied </TD></TR></TABLE>
Thread Starter
Member
Joined: Oct 2001
Posts: 3,350
Likes: 0
Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo »</TD></TR><TR><TD CLASS="quote">throw me offers or trades</TD></TR></TABLE>
Thread Starter
Member
Joined: Oct 2001
Posts: 3,350
Likes: 0
Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
</TD></TR></TABLE>
Thread Starter
Member
Joined: Oct 2001
Posts: 3,350
Likes: 0
Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo »</TD></TR><TR><TD CLASS="quote">I have:
-Garrett T3 50 Trim .42/.48ar w/Minimal Shaft Play for $185 Shipped
(There is no internal wastegate swing valve or wastegate actuator, right now its made to run an external wastegate, unless you buy a swing valve and wastegate actuator to run a internal wastegate setup)
-SOHC/D16/D15/D Series T3 Log Manifold for $180 Shipped
If you plan to send the money by paypal, add 3% to the total
The manifold has a bit of surface rust, which can be taken off with a wire brush or so. Manifold is not ac compatible
If you are interested, hit me up on aim or pm, my aim is oxsleeperxo
Check out my profile for vouches and my vouch thread https://honda-tech.com/zerothread?id=1033136
Modified by oxSLEEPERxo at 4:52 PM 4/25/2005</TD></TR></TABLE>
-Garrett T3 50 Trim .42/.48ar w/Minimal Shaft Play for $185 Shipped
(There is no internal wastegate swing valve or wastegate actuator, right now its made to run an external wastegate, unless you buy a swing valve and wastegate actuator to run a internal wastegate setup)
-SOHC/D16/D15/D Series T3 Log Manifold for $180 Shipped
If you plan to send the money by paypal, add 3% to the total
The manifold has a bit of surface rust, which can be taken off with a wire brush or so. Manifold is not ac compatible
If you are interested, hit me up on aim or pm, my aim is oxsleeperxo
Check out my profile for vouches and my vouch thread https://honda-tech.com/zerothread?id=1033136
Modified by oxSLEEPERxo at 4:52 PM 4/25/2005</TD></TR></TABLE>
Thread Starter
Member
Joined: Oct 2001
Posts: 3,350
Likes: 0
Re: D Series/D16 Turbo and Manifold (oxSLEEPERxo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo »</TD></TR><TR><TD CLASS="quote"> 
</TD></TR></TABLE>
</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
morgan@synapse motorsport
Classifieds: Forced Induction
14
Dec 4, 2006 10:16 PM
racinskittle
Classifieds: Forced Induction
2
Aug 21, 2003 09:57 AM
