My 1997 Acura 1.6 EL MB4
Thread Starter
Member
Joined: Nov 2004
Posts: 1,792
Likes: 0
From: Kitchener, Ontario, Canada
My 1997 Acura 1.6 EL MB4
Ok, to all of you guys who wanted pics of my EL, I washed it today... to I'm not as embarassed to take pics... although it's still stock except for the signal lights/corner lights and fogs. Warmer weather is coming soon! I will be updating this thread with more pics as I change things.
<FONT COLOR="red"><FONT SIZE="2">To see pics of what was just updated, or to see the most recent pics of the EL... skip to the bottom of this post, it will be the last few pics.</FONT></FONT>
<FONT SIZE="2"><FONT COLOR="blue">UPDATE: TUNED at 9psi today!
Maximum whp = 204 @ 7100rpm
Maximup wtq = 181 @ 6600rpm
</FONT></FONT>
Now I have to take care of my head lift problem by getting a new HG, some ARP studs and I'm gonna install a GE blockguard at the same time.
Dyno pics!
Right click the following and save as:
Tuning partial throttle movie clip
A good look at the AWD dyno! (movie)
If you have a sub on your computer, you can hear exactly what my Ebay exhaust sounds like! That thing is just awesome!!!
Recent pic:
-----------------------------------------------------------------------------------------
Now from the start!
As promised, the car with the H&R Sports on it!
(I left the hubcaps off for the alignment, have been too lazy to put them back on)
N1 installed too.
Front wheelwell, less gap.
Rear wheelwell,
Rims installed (same angles as before...
)
Better shot of the exhaust:
Painting the valve cover, some pics!
Here is the painted cover!
Fuel pressure guage installed on top of the filter. (I sell these for $18US, PM me)
Strut bar installed!
Test fit of the turbo and manifold!
Vacuum manifold installed
Coolant/oil feed lines for the turbo, they're capped for now.
Autometer oil pressure guage and vac/boost guage (bad pic):
B&M fuel pressure modifier installed! See the How-To!
-Walbro 255 installed, no pics... it's just a stupid fuel pump.
<u>Links: </u>
My headlights: https://honda-tech.com/zerothread?id=1167354
My valve cover thread: https://honda-tech.com/zerothread?id=1216425
My B&M fuel pressure modifier How-To: https://honda-tech.com/zerothread?id=1230435
Modified by CycloneBlue_1.6EL at 4:18 AM 6/4/2005
<FONT COLOR="red"><FONT SIZE="2">To see pics of what was just updated, or to see the most recent pics of the EL... skip to the bottom of this post, it will be the last few pics.</FONT></FONT>
<FONT SIZE="2"><FONT COLOR="blue">UPDATE: TUNED at 9psi today!
Maximum whp = 204 @ 7100rpm
Maximup wtq = 181 @ 6600rpm
</FONT></FONT>
Now I have to take care of my head lift problem by getting a new HG, some ARP studs and I'm gonna install a GE blockguard at the same time.
Dyno pics!
Right click the following and save as:
Tuning partial throttle movie clip
A good look at the AWD dyno! (movie)
If you have a sub on your computer, you can hear exactly what my Ebay exhaust sounds like! That thing is just awesome!!!
Recent pic:
-----------------------------------------------------------------------------------------
Now from the start!
As promised, the car with the H&R Sports on it!
(I left the hubcaps off for the alignment, have been too lazy to put them back on)
N1 installed too.
Front wheelwell, less gap.
Rear wheelwell,
Rims installed (same angles as before...
)Better shot of the exhaust:
Painting the valve cover, some pics!
Here is the painted cover!
Fuel pressure guage installed on top of the filter. (I sell these for $18US, PM me)
Strut bar installed!
Test fit of the turbo and manifold!
Vacuum manifold installed
Coolant/oil feed lines for the turbo, they're capped for now.
Autometer oil pressure guage and vac/boost guage (bad pic):
B&M fuel pressure modifier installed! See the How-To!
-Walbro 255 installed, no pics... it's just a stupid fuel pump.
<u>Links: </u>
My headlights: https://honda-tech.com/zerothread?id=1167354
My valve cover thread: https://honda-tech.com/zerothread?id=1216425
My B&M fuel pressure modifier How-To: https://honda-tech.com/zerothread?id=1230435
Modified by CycloneBlue_1.6EL at 4:18 AM 6/4/2005
Thread Starter
Member
Joined: Nov 2004
Posts: 1,792
Likes: 0
From: Kitchener, Ontario, Canada
Re: My 1997 Acura 1.6 EL MB4 (D-CeReaL#4)
Pretty much, other than a few exterior panals, all black interior, 26mm front swaybar and a stock rear swaybar. Oh, and a valvecover that everyone wants for some reason...
Honda-Tech Member
Joined: Mar 2003
Posts: 7,459
Likes: 0
From: SCV
Re: My 1997 Acura 1.6 EL MB4 (XxSOHCDriVerxX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XxSOHCDriVerxX »</TD></TR><TR><TD CLASS="quote">does the Valve cover say 1.6 VTEC???</TD></TR></TABLE>
u know your diggin it henry
u know your diggin it henry
Honda-Tech Member
Joined: Sep 2002
Posts: 5,973
Likes: 0
From: i dont know, CA, USA
Re: My 1997 Acura 1.6 EL MB4 (FF-sean)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FF-sean »</TD></TR><TR><TD CLASS="quote">
u know your diggin it henry </TD></TR></TABLE>
hell yeah....
u know your diggin it henry
</TD></TR></TABLE>hell yeah....
Trending Topics
Thread Starter
Member
Joined: Nov 2004
Posts: 1,792
Likes: 0
From: Kitchener, Ontario, Canada
Re: My 1997 Acura 1.6 EL MB4 (XxSOHCDriVerxX)
Yes sir, it does!
It's ugly and cow-spotted right now, but will be getting some black VHT ripple-coat treatment soon enough. (when the weather warms up that is...)
It's ugly and cow-spotted right now, but will be getting some black VHT ripple-coat treatment soon enough. (when the weather warms up that is...)
Honda-Tech Member
Joined: Sep 2002
Posts: 5,973
Likes: 0
From: i dont know, CA, USA
Re: My 1997 Acura 1.6 EL MB4 (CycloneBlue_1.6EL)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CycloneBlue_1.6EL »</TD></TR><TR><TD CLASS="quote">Yes sir, it does!
It's ugly and cow-spotted right now, but will be getting some black VHT ripple-coat treatment soon enough. (when the weather warms up that is...)</TD></TR></TABLE>
I WANT IT!!!!!!!!!!!!
It's ugly and cow-spotted right now, but will be getting some black VHT ripple-coat treatment soon enough. (when the weather warms up that is...)</TD></TR></TABLE>
I WANT IT!!!!!!!!!!!!
Banned
Joined: Feb 2004
Posts: 7,252
Likes: 1
From: Canada
Re: My 1997 Acura 1.6 EL MB4 (Reza)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reza »</TD></TR><TR><TD CLASS="quote">the acura civic, fresh. </TD></TR></TABLE>
w0rd
</TD></TR></TABLE>w0rd
Thread Starter
Member
Joined: Nov 2004
Posts: 1,792
Likes: 0
From: Kitchener, Ontario, Canada
Re: My 1997 Acura 1.6 EL MB4 (XxSOHCDriVerxX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XxSOHCDriVerxX »</TD></TR><TR><TD CLASS="quote">I WANT IT!!!!!!!!!!!!</TD></TR></TABLE>
You'd better get in line then! Dude, I'm not even joking...
https://honda-tech.com/zerothread?id=1037438
That's the line... make a post in there and I won't forget you when I find some of these covers around here.
You'd better get in line then! Dude, I'm not even joking...
https://honda-tech.com/zerothread?id=1037438
That's the line... make a post in there and I won't forget you when I find some of these covers around here.
Thread Starter
Member
Joined: Nov 2004
Posts: 1,792
Likes: 0
From: Kitchener, Ontario, Canada
Re: My 1997 Acura 1.6 EL MB4 (accordselux)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordselux »</TD></TR><TR><TD CLASS="quote">Mmmmm....nice. I want one. It would be an interesting car...the economy luxury...</TD></TR></TABLE>
The only "luxury" option it has over the Civic is the leather. Mine is cloth thank god, I'm not a big fan of leather. Taking the suspension into account, I prefer to think of it as more of a 4 door version of the Si without the B series and rear discs...
The only "luxury" option it has over the Civic is the leather. Mine is cloth thank god, I'm not a big fan of leather. Taking the suspension into account, I prefer to think of it as more of a 4 door version of the Si without the B series and rear discs...
Thread Starter
Member
Joined: Nov 2004
Posts: 1,792
Likes: 0
From: Kitchener, Ontario, Canada
Re: My 1997 Acura 1.6 EL MB4 (14bcoupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 14bcoupe »</TD></TR><TR><TD CLASS="quote">WOW horrible valve cover i ll do you the favor and trade you for the us version.
i like that el btw do you know the weight of the car??</TD></TR></TABLE>
The stock weight of the car is 1590kgs (about 3500lbs) according to the door sticker. As for the valve cover... it's mine and I won't give it up. I just need to give it a little TLC.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by patastinky »</TD></TR><TR><TD CLASS="quote">that **** bugs me out, half civic, half accord, half acura.wo0t!!! </TD></TR></TABLE>
That's weird reading what people say about it... It's just another car up here in Canada...
i like that el btw do you know the weight of the car??</TD></TR></TABLE>
The stock weight of the car is 1590kgs (about 3500lbs) according to the door sticker. As for the valve cover... it's mine and I won't give it up. I just need to give it a little TLC.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by patastinky »</TD></TR><TR><TD CLASS="quote">that **** bugs me out, half civic, half accord, half acura.wo0t!!! </TD></TR></TABLE>
That's weird reading what people say about it... It's just another car up here in Canada...
Honda-Tech Member
Joined: Jan 2004
Posts: 1,797
Likes: 0
From: Sonsonate, El Salvador
Re: My 1997 Acura 1.6 EL MB4 (Reza)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reza »</TD></TR><TR><TD CLASS="quote">the acura civic, fresh. </TD></TR></TABLE>
</TD></TR></TABLE>
Thread Starter
Member
Joined: Nov 2004
Posts: 1,792
Likes: 0
From: Kitchener, Ontario, Canada
Re: My 1997 Acura 1.6 EL MB4 (S0uLjHa)
Thanks for all the comments guys! This is now my official build up page, I'll be keeping it updated because I take a lot of pictures... and I've got a lot of stuff to do in the next month and a half.
