genuine mugen front (2nd gen) and mugen rear (1st gen) for sale - selling cause I got shafted on spoon cams I bought - when I received them the intake cam was broken, the exhaust cam was OK - so i need to special order a new spoon intake cam from A&J - I can get pics (I have access to a digicam here at work) - both bars are currently installed in my car - will fit 92-00 civics (all) and 94-01 integras (all) need to sell ASAP - asking 375.00 + shipping OBO I could also use a stock (OEM) GSR strut bar - I lost mine pls don't ask

 

I just took digicam pics of the bars in my teggy - if anyone wants to see them IM me and I can email them to you - if anyone has space to host some pics (3-4) please IM me and I'll get them to you thanks...TTT

 

like the H-T advertising



no you are not seeing double there are two mugen rear bars - one with a sticker and one without

I can take more pics (at will) here at work (since I found out we a digicam for our "business use" if need be

all 3 of the bars are genuine mugen - I have told owen that one rear is his but I need loot to replace the broken spoon intake cam i got, because the shipper isn't refunding my money as of yet

and yes I know my trunk needs to be vacuumed and my engine bay needs a good cleaning


[Modified by 2000-4DRGSR, 1:36 PM 1/23/2002]

 

$375 obo for all 3 bars?

 

opps - sorry for the misunderstanding - owen the soyboy is getting one rear strut bar

the 375.00 OBO! is for ONE rear 1st gen and ONE front 2 gen - thanks and sorry for any misunderstanding

BTW - these bars will fit all 92-00 civics and all 94-01 integras


[Modified by 2000-4DRGSR, 1:47 PM 1/23/2002]

 

What's difference between 1st gen & 2nd gen Mugen rear strut bar? Are you willing to sell bars separately?


----- Antony

 

I mailed you ..... Get back to me if you want to get rid of them. Thanks bro.

 

the 1st generation mugen bars bolt to the strut bolts and the chassis (front and rear) the 2nd generation front bar bolts to the chassis only while the 2 generation rear bar bolts only to the top of the strut bolts - you want pics to show you - ok

here's the front 1st generation (thanks jerry (jyea))


here's another pic of the 1st gen front & rear


here's the pic of my 2nd gen front bar
notice how it doesn't mount to the strut bolts - only the chassis

hope that helps

bump...TTT

 

highest offer now stands at 355.00 + shipping, I guess I could separate the bars if the offer was very resonable (for me, not you )

 

just a stupid question, but can you use both 1st and 2nd gen front strut bars since they mount in different locations? Or will they not clear each other?

`jOEL

 

yes (sorry to admit ) that is a stupid question, the answer is No, the 2nd gen mounts in the same locations as the 1st gen, the 1st gen has MORE (ie to the strut bolts AND the chassis) mounting locations - which you could have gather by looking at the pics and carefully reading my descriptions, thanks - Greg


[Modified by 2000-4DRGSR, 10:17 AM 1/24/2002]

 

haha sorry i didnt look at the pictures close enough. Looks like the first gen has more mounting locations, but less rigid.

~jOEL

 

yup thats what mugen says - which is basically the gen2 bars are just as strong as the gen 1 bars - tough to prove though

 

Are you certain that these bars will fit on non-Si Civic. I've got 96 Civic EX, & I don't have those 2 additional chassis bolts on either side. There are just 2 rubber plugs. However, if I get bolts, wouldn't they just fall out underneath car if someone removed strut bar?


----- Antony

 

they will fit you 96 EX civic (THE EX AND THE SI HAVE THE SAME CHASSIS), - the bolts are really like screws so the won't fall out, and only "screw" down so far. anything else you can try directing to Kingmotorsports - This post is killin' me - if anyone else would care to take a stab at ant-man or others Q's - feel free, I am no way an expert on this stuff, but I tried th learn the most I could

these will fit all 92-00 civics and all 94-01 integra


[Modified by 2000-4DRGSR, 12:03 PM 1/24/2002]

 

TTT

 

TTT

 

take the plugs out....get 4 bolts and 4 nuts...you will have to take off your wheel and get an offset wrench or a long socket to fit inside the wheel well to keep the nut from spinning while you tighten the bolt down with a rachet in your other hand...it shouldn't take much longer than 25 minutes....I did this and it works fine

TTT

 

yeah....i put a stock gs-r bar on my 5th gen civic coupe and all i did was line the bar up...mark where the holes went, drill and use some decent stainless nuts and bolts. then i just used a wrench and ratchet to tighten the nuts. be sure to use a little loctite as well on the threads.

CHRIS

 

How about just the front 2nd gen mugen bar. How much would you let it go for seperately?

 

yes i still have 'em (possibly 200 each if I separate i know thats alot)

 

SOLD!!!!! ($400.00 shipped)

 

darn it i was about to email you and i have a gsr one too