there are 2 nipples on the greddy type s bov what do they go to?
Thread Starter
Honda-Tech Member
Joined: Apr 2004
Posts: 3,178
Likes: 0
From: MD
there are 2 nipples on the greddy type s bov what do they go to?
there are 2 nipples on teh greddy type s bov, what do they go to? i know one goes to a vacuum sorce but what about the other one?
Honda-Tech Member
Joined: Oct 2000
Posts: 11,155
Likes: 0
From: Dallas/Miami, FL, USA
Re: there are 2 nipples on the greddy type s bov what do they go to? (jdmhonda)
the side port or angled one is bypassed the top port is where you need to hook vaccum too the bottom angled one is breather
Joined: Aug 2003
Posts: 1,205
Likes: 0
Re: there are 2 nipples on the greddy type s bov what do they go to? (jdmhonda)
If you dont know, dont respond. 
The bottom nipple is connected to the bottom of the piston, the part where the charge pipes pressure pushes upward. When you get off the throttle, and strong vacum takes over the top portion of the bov, the charged air's pressure compressees the spring and lifts the plnunger up. The bottom nipple should be conncted to a charge pipe somewhere, it will help make the actuator function faster and open quicker. its just a little extra push up.
The bottom nipple is connected to the bottom of the piston, the part where the charge pipes pressure pushes upward. When you get off the throttle, and strong vacum takes over the top portion of the bov, the charged air's pressure compressees the spring and lifts the plnunger up. The bottom nipple should be conncted to a charge pipe somewhere, it will help make the actuator function faster and open quicker. its just a little extra push up.
Thread
Thread Starter
Forum
Replies
Last Post
