fs/ft '92 Civic hatch CX, built b16, Maryland, 5k obo
I am selling my 1992 Honda Civic hatchback, it is Milano red. I have invested alot more than I am selling it for, and I am getting out of the Honda scene. I must sell this quick. I have reciepts for all of the major items on the car, and they total more than I am selling it for. I would like to get <U>$5000 </U>but the price is negotiable, also look at my willing trades below. Please send me an email at
samiami12001@yahoo.com for more information/pictures. The chassis has about 150,000 miles on it, and the b16 has about 50k total, with about 1500 miles on all of the aftermarket internal parts and the transmission. All engine/transmission labor was done by Inline Pro of Springfield Virginia. The body is not in perfect condition, but what can you expect from a 13 year old car. Here is a list of the parts and work:
13'' steelies, and old school 14" Integra wheels both flat black, with decent rubber
1 1/2" lowering springs and replaced shocks all around
strut bars on front and rear, lower tie bars, and Integra GSR rear sway bar
Carbon fiber hood
spoon replica mirrors
2 1/2'' header-back exhaust, includes straight pipe and cat, muffler painted black
4-1 racing header+stock usdm b16 header
custom short ram intake, tapered throttle body
Intake maniflod port matched to head
cylinder head port/polish job done by Jeff Hunley
Crane Cams Stage 2 cams, and stock b16 cams
stainless steel "rev" valves,+ stock b16
inline pro valve springs/titanium retainers, + stock b16
recentley Inline Pro built the transmission with all new gears and syncros$$$$$$
Competition Clutch "Ironman" 6puck clutch
Competition Clutch super lightweight flywheel
Field V-tec/fuel controller
guages included but not installed, water temp,oil pressure, air/fuel ratio
Integra GSR cloth front seats, no rear seats
Integra type-R shifter/shift ****
shift linkage replaced with ITR linkage when trans. work done
The motor is a USDM b16a2 out of my friends '99 Si, it was converted from obd-2 to obd-1
The motor runs very strong, however it could use some good engine managment/tuning by means of hondata/uberdata/v-afc
I have alot of misc. Honda stuff laying around my garage, I would be happy to include most of it with the purchase of the car. I must sell the car very quickly, The price of <U>$5000 </U>is negotiable, also if you have a 240sx swapped or not I am looking for one and would maybe look into a trade, also if you have a 2001 or newer streetbike I.E. R1, gsx-r 750/1000, or cbr 600rr, 929/954/1000rr, please let me know, I am also looking for a bike. Please email me at
samiami12001@yahoo.com for more info/pics. Thanks










Modified by hondasicrfex at 10:42 PM 2/9/2005
samiami12001@yahoo.com for more information/pictures. The chassis has about 150,000 miles on it, and the b16 has about 50k total, with about 1500 miles on all of the aftermarket internal parts and the transmission. All engine/transmission labor was done by Inline Pro of Springfield Virginia. The body is not in perfect condition, but what can you expect from a 13 year old car. Here is a list of the parts and work:13'' steelies, and old school 14" Integra wheels both flat black, with decent rubber
1 1/2" lowering springs and replaced shocks all around
strut bars on front and rear, lower tie bars, and Integra GSR rear sway bar
Carbon fiber hood
spoon replica mirrors
2 1/2'' header-back exhaust, includes straight pipe and cat, muffler painted black
4-1 racing header+stock usdm b16 header
custom short ram intake, tapered throttle body
Intake maniflod port matched to head
cylinder head port/polish job done by Jeff Hunley
Crane Cams Stage 2 cams, and stock b16 cams
stainless steel "rev" valves,+ stock b16
inline pro valve springs/titanium retainers, + stock b16
recentley Inline Pro built the transmission with all new gears and syncros$$$$$$
Competition Clutch "Ironman" 6puck clutch
Competition Clutch super lightweight flywheel
Field V-tec/fuel controller
guages included but not installed, water temp,oil pressure, air/fuel ratio
Integra GSR cloth front seats, no rear seats
Integra type-R shifter/shift ****
shift linkage replaced with ITR linkage when trans. work done
The motor is a USDM b16a2 out of my friends '99 Si, it was converted from obd-2 to obd-1
The motor runs very strong, however it could use some good engine managment/tuning by means of hondata/uberdata/v-afc
I have alot of misc. Honda stuff laying around my garage, I would be happy to include most of it with the purchase of the car. I must sell the car very quickly, The price of <U>$5000 </U>is negotiable, also if you have a 240sx swapped or not I am looking for one and would maybe look into a trade, also if you have a 2001 or newer streetbike I.E. R1, gsx-r 750/1000, or cbr 600rr, 929/954/1000rr, please let me know, I am also looking for a bike. Please email me at
samiami12001@yahoo.com for more info/pics. Thanks









Modified by hondasicrfex at 10:42 PM 2/9/2005
Bump for Sam..and Justin for helping him sell it
. I know both of these guys and they are willing to go out of there way for anyone..really nice people. Sam gave me a ride in this thing not too long ago and let me tell you...untuned this thing pulled pretty damn good. This car is set and ready to go...all it needs is a tune
. Bump for an awesome car and a good guy
.
. I know both of these guys and they are willing to go out of there way for anyone..really nice people. Sam gave me a ride in this thing not too long ago and let me tell you...untuned this thing pulled pretty damn good. This car is set and ready to go...all it needs is a tune
. Bump for an awesome car and a good guy
.
Hey where is your air filter? Honda didn't want those things ran without any filtration system. I know you dont want to suck in any small kids with that torque box be careful!
Trending Topics
With a good 1.8 block and tuning this is an easy low 12 second car on slicks. As it sits I ran a 14.1@98 on bald 13" street tires and steelies. Any offers??? honestly don't hold back....she needs a new home
how much without engine/trans/exhuast/ETC and no suspension/wheels/brakes?
I need a shell with 100% complete interior. let meknow. thanks
-james
I need a shell with 100% complete interior. let meknow. thanks
-james
I don't mean to be an ***, but i didn't say i was selling a shell....however I will give it to you for 5k obo
Thanks
Thanks
email me at samiami12001@yahoo.com the new price is $4200. I need to sell quickly


