Autopilots CR-X
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kevco »</TD></TR><TR><TD CLASS="quote">Nice lip... what kind?
Hot seats and headlights too.</TD></TR></TABLE>
EG
Hot seats and headlights too.</TD></TR></TABLE>
EG
Trending Topics
Thread Starter
Joined: Mar 2004
Posts: 1,647
Likes: 0
From: ARE YOU EXPERIENCED, PURPLE HAZE, STONE FREE
thanx bro
the front lip is made by Wings West it is the R.S series for the 92-95 civic h/b or coupe. Not too much modification for it to fit. I hope this was of any help to you?
the front lip is made by Wings West it is the R.S series for the 92-95 civic h/b or coupe. Not too much modification for it to fit. I hope this was of any help to you?
Thread Starter
Joined: Mar 2004
Posts: 1,647
Likes: 0
From: ARE YOU EXPERIENCED, PURPLE HAZE, STONE FREE
2000-2003 B.M.W M3 Bi-Xenon projectors were used in the retro-fit. It took about 6 hours for each headlight from opening the oem seal of the headlight to sealing it back up leak proof. I chose the M3 projectors because of the diameter it was the closest to the width of the cr-x head lamp. You can also use others such as audi, benz or even nissan maxima but your best fit for these would be any bmw 3, 5, series. Because it throws the baddest beam pattern similar to the Honda S-2000. Also the Bi-Xenon allows you to have hi and low beams. A single fillament bulb is used for high intensity. The projector inside contains a solenoid that activates a plate cut off pattern for the high beam, its like a flap opening kinda like the opening of a throttle body. To retro-fit i could go on and on on how i did it but your best bet would be to try it yourself , you'll have fun!!
and goodluck
and goodluck
this car is hott I took some pics of randy crx a few months back and never posted them i''ll post a couple with the Hids on too









Modified by Heymikeyyyy at 1:58 AM 2/7/2005









Modified by Heymikeyyyy at 1:58 AM 2/7/2005

nice rex but i have a quick question. What kinda HID setup are you running. I have a jdm front and my car thats taken apart and i would like to get it done while the headlights are out. If you could help me out id appreciate it








